Тёмный

Marklin Feedback Decoder S 88 - Part 3: CS3+ and 60881 

ajckids
Подписаться 4,4 тыс.
Просмотров 9 тыс.
50% 1

Опубликовано:

 

30 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 11   
@APV2013
@APV2013 4 года назад
Yes it was helpful. Thank you!
@svandervaart9599
@svandervaart9599 3 года назад
Supergoed gedaan, erg handig, juist mijn eerste twee treinen automatisch een rondje laten rijden.
@ajckids
@ajckids 3 года назад
Bedankt voor dat nieuws! Blij dat je er wat aan had! Veel plezier met het automatiseren. Thank you for the good news. I am happy it was of use to you. Have fun with automating your layout!
@heinzvanderlaan6547
@heinzvanderlaan6547 2 года назад
Thanks for this clear video !! I am wondering ... can I stop trains with this L88 without (MFX) Signals?
@ajckids
@ajckids 2 года назад
You could tell the CS3 (program) to stop a specific train, by recording a sequence of events. If you want to un-power a stop track (stop section), you'd need something like a digital relay (M-84 would be good).
@mikedulle1149
@mikedulle1149 7 месяцев назад
I don't get the placement of digital contact track and the actual physical contact track. Don't you need to place the digital contact where the physical contact is on the layout?
@ajckids
@ajckids 6 месяцев назад
The actual physical contact track is used in digital. It sends the signal (pulse) through a single wire to a "feedback" decoder, often referred to as an S-88. This feedback decoder has 16 inputs for 16 contact tracks. It adds a digital number to each input. The Central Station will get the pulse send from your contact track, and reads the number that the S-88 attached to it. It then will do the action that you have programmed in the Central Station. This action could be switching a turnout, or changing a signal etc.
@mikedulle1149
@mikedulle1149 6 месяцев назад
That didn't answer my question. On one's track plan the contact track image should be placed on the track diagram at the location of physical contact track. However none of the videos indicate where to place the digital image. You need to clarify the placement of the digital and physical contact track.
@ajckids
@ajckids 4 месяца назад
You place the digital contact track on your track plan in the same relative location as where you have the actual (physical) contact track on your layout. Meaning: If on your layout the contact track is to the left of your actual (physical) turnout S1, you place it on your digital screen layout to the left of S1. The only reason you do it this way, is so that it makes sense to you. So that you can identify which digital image contact track corresponds with your actual (physical) contact track.
@davidgreenwood5209
@davidgreenwood5209 4 года назад
does anyone know if I can use a Uhlenbrock 63410 module with the central station 3plus?
@ajckids
@ajckids 4 года назад
From memory, the Uhlenbrock module communicated through the "Uhlenbrock Loconet", not your regular 2 wire digital signal in use by Marklin and others. Maybe they have a module?
Далее
Самое большое защитное стекло
00:43
Marklin Digital Club Webinar #4 - S88s & Feedback Sensors
1:55:36
Marklin M84 Decoder Part 2: adding Circuit Tracks
6:16
MARKLIN CS3+ INTRO (Part 3)
8:05
Просмотров 13 тыс.
S88 Link mit normalen S88 Modulen erweitern
11:20
Просмотров 6 тыс.
MARKLIN CS3+ INTRO (Part 2)
10:35
Просмотров 19 тыс.