WOW! I followed the instructions, a different brand of key safe, fiddled a while with various sizes of shin and IT WORKED (after about an hour)!!!! Thrilled, because I had the keys locked inside. Long story. But an excellent outcome. Who would have thought. Blessings form Australia! Thank you very much.
Just done this it works a treat ,little tip when slipping the tin along the side of the wheel apply just a tiny amount of downward pressure,as you turn the wheel you’ll feel a slightly slack point and that’s your wheel in the right point and remember the 3downward turns on each wheel ,thankyou for uploading you have saved a small fortune in gaining entry damage and new locks and keys.
Just did this on a screen door handle that I found in the dumpster use the can sliver to flimsy so I used the metal zip tie end took me 10 minutes between the flimsy can sliver and the metal zip tie it totally works I'm getting pick set
Increible que funcionara este truco… lo había intentado mucho y no habia visto la parte que habia que girar después… en mi caso con una caja de otra marca, fueron 2 veces,todos los números, de donde se liberaba el metal
Glad I watched this video. It prompted me to get my lock box and figure out the dang code. I tried every code it could be and it opened. This method wasn't tried... so I can't say if it works or not. But thanks for bringing the fight out of me to remember the code! 😆 🤣 😂
It works perfect! You must have a small stripe, only 3 or 4 mm. On the left side, down in the corner. You feel directly, when the stripe "lock in". And very important!! Notice the four numbers. They are not!!!! the opening numbers. Thats the openning mechanism numbers in front. The opening mechanism must be move to the top. Now you must move the number plate syncron to the numbers. For easy example: You find 0000. Now move all four syncron to 1111, next 2222........ all four together!! And you will see, it works. My number on the front was 3030, after syncron moving the number plate, the real opening number was 7474 !! Good luck!
I have tried it with a piece of cola can and a piece of plastic and nothing iwhat am i doing wrong? we have alot of these laying around at work i do not want to throw them away we can reuse them
@@MrYracheta82It about your feeling in your fingers. first try all numbers in the first row. And take time.. When you mean at one number ist feels different, then take another row. When you feel the same different your on the right way. That was my way and it works.
There's a kind of notch on the driveshaft. And if you turn the wheels ( dials) careful enough, you can feel the shim tick into the notch. I needed two attempts to open it successful. And I didn't need to turn the digits further,...it opened immediately. Bonne Chance....
The +3 I think is dependant. Meaning I did plus 3. My original numbers with feel was 3598, plus 3 I got 6821. It didn't work plus one til it did and got 8403 so for mine was like plus five. Someone else commented theres was plus 2. So I would plus one from your original til it opens and then you should find it
Yes it does, I just did it with this exact lock. I used a 3.5mm wide strip of a coke can. Turn the tumbler untill you feel the loose position, then add 3 positions to rotate by 90 degrees.👍