Тёмный
No video :(

Mastering Toro TimeCutter: Ultimate Guide to Easily Servicing Your Zero Turn Mower Like A Pro 

Individualized Repair Inc
Подписаться 19 тыс.
Просмотров 23 тыс.
50% 1

Thank you for watching!! If we helped you out and you want to show your support - LIKE, SUBSCRIBE or give us a shout out below. If you saw something you didn't like leave your comment below as well, these things help us get better!
To see our recommended tools and products visit our Amazon shop at www.amazon.com/shop/individua...
Service Your Toro TimeCutter Zero Turn Mower!
Join us in this comprehensive guide as we give step-by-step instructions for servicing your machine like a true professional.
Routine maintenance and service tips to keep your Toro TimeCutter performing at its peak.
Don't miss out on this must-watch tutorial that's destined to make maintaining your mower easier.
This repair video is done on a Toro Timecutter model 75740, which is virtually the same as the SS4200 and many other models.
Air filter is part number 136-7814 we use Rotary 16829 ( amzn.to/41gEZpe )
Oil filter is part number 136-7848 we use Rotary 15181 ( amzn.to/488bub7 )
Fuel filter is part number 139-0717 we use Oregon 07-122 ( amzn.to/4aeUOR5 )
Spark plug is part number 77-7330 we use Briggs & Stratton 491055t can also use Champion RC12YC or NGK BKR5ES ( amzn.to/3RcgaWQ )
Use 10w30 motor oil - we use synthetic blend
Like and subscribe to see more helpful videos like this one! Save some money by doing it yourself!
#toro #loncin #smallenginerepair #individualizedrepair #smallbusiness #diymaintenance
About Us:
My name is Martin. I have been repairing tools and small engines for almost 20 years. We operate a small engine repair shop in Illinois. We service / repair Briggs & Stratton, Kohler, Kawasaki, John Deere, Cub Cadet, Toro Tecumseh, Loncin, Honda, Craftsman, Husqvarna, MTD, Troy Bilt, Simplicity, John Deere, Exmark, LCT, Generac and many more brands. We work on riding mowers, walk behind mowers, snow blowers, zero turns, generators, pressure washers and much more. We normally repair about 3,000 pieces of equipment every year and look at many more that are beyond an affordable repair. Hopefully our videos will save you some money and give you the information you need to work on your own equipment or figure out the issue at hand.
Disclaimer: Links included in the description are affiliate links. As an Amazon associate we earn from qualifying purchases. There will be no additional charge to you for purchasing here. We appreciate your support, which allows us to continue to provide original content!
Please be careful when repairing any piece of equipment and follow all possible safety measures. This video is for entertainment purposes only.

Опубликовано:

 

6 июн 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 58   
@philliphall5198
@philliphall5198 Год назад
AllWAYS waiting on your video 😊 Thank You 🙏
@IndRepair
@IndRepair Год назад
Thanks for watching!!!
@adammortimer7368
@adammortimer7368 6 месяцев назад
Nice video. You sound just like Tom Hanks.
@IndRepair
@IndRepair 6 месяцев назад
Haha! Thanks for watching!!
@baddad5781
@baddad5781 4 месяца назад
It's that damn parking module. Apperiently there is a problem with them straight from the factory. Alot pf folks have had issue with. Some almost brand new. Thanks for sharing this with us.
@IndRepair
@IndRepair 4 месяца назад
Definitely should be addressed!
@infinityhomeservices
@infinityhomeservices Месяц назад
Great video
@IndRepair
@IndRepair 28 дней назад
Thank you!
@stepheneggert9474
@stepheneggert9474 9 месяцев назад
I have a 2022 42 in. With a Kohler 22 HP. Iron forged deck.. for my property..I service my unit on my single post inground lift ..I pull off the sleeves on the lift and drive over it to take off the blades for maintenance ..etc. I can get her up over my head to clean the deck , I have 54 hour in my toro. I bought it with the hour meter..I love toro.. products..great video..great advise. IL run 10- 30 .I'm down in Florida. It's hot down here and lots of sand..in the lawns..no dirt..
@IndRepair
@IndRepair 9 месяцев назад
Awesome!! Thanks for watching!
@deVrieco
@deVrieco 2 месяца назад
Thanks!
@IndRepair
@IndRepair 2 месяца назад
Glad to help!
@tomnape28
@tomnape28 7 дней назад
I just got one but it has a briggs and stratton 500cc 15.5 motor now
@IndRepair
@IndRepair 7 дней назад
Great info!
@karenfrye4546
@karenfrye4546 8 месяцев назад
I liked this video. I have had this timecutter for 2 years and wondered if I need to service the drive hydraulics and adjust the forward/reverse handles as one is slightly ahead of the other? Thanks
@IndRepair
@IndRepair 8 месяцев назад
You can definitely adjust the travel of the handles to fix this unless one of them is slipping. Thanks for watching!
@philliphall5198
@philliphall5198 Год назад
Orgen has good parts and I’ve never had a problem with them I need a pump unit, hand pump type
@IndRepair
@IndRepair Год назад
Yeah most are pretty solid! It's like everything else, check it out before you install it and decide if you are happy with the quality and fit before you put your name on the repair
@SendItBilly
@SendItBilly 3 месяца назад
Any info on what plugs, belts , blades to stick to get going? I’m doing a mobile blade sharpening and get a lot of requests for tune up which I can do ( doing at my house for drop offs and neighbors) but don’t carry any stock. Not all homeowners know how to find motor number or model type. Excellent video. Thank you.
@IndRepair
@IndRepair 3 месяца назад
We work closely with distributors so you can drive the price down. Medart, Power Distributors and Oscar Wilson will cover 99% of what you need to order. They have minimum orders for free shipping but almost always next day delivery depending on when you order. We only stock stuff we sell a lot of, mostly MTD stuff and blades for almost everything
@johnd1561
@johnd1561 2 месяца назад
The tire pressure that you're reading on the sidewalls is the max tire pressure. Toro recommended pressure is much lower. Your tires are over inflated!
@IndRepair
@IndRepair 2 месяца назад
Softer ride with less pressure, otherwise not a problem in any other way
@philliphall5198
@philliphall5198 Год назад
I put my waste oil on top of my cross tie fence post and spray the side There 55 years old and still good
@IndRepair
@IndRepair Год назад
Haha, nice!
@hoganoverby9501
@hoganoverby9501 Год назад
Awesome video! I have a time cutter an it’s running rough, I’ve changed plugs an it ran better but then fowled out again I think it’s running rich what could be the problem?
@IndRepair
@IndRepair Год назад
Stuck float in the carburetor is a likely cause. Bad fuel or moisture in the fuel will cause it to smell rich sometimes also
@hoganoverby9501
@hoganoverby9501 Год назад
@@IndRepair thank you! I will check that out
@philliphall5198
@philliphall5198 Год назад
What brand of fuel hose do you use??? Hard to find good stuff online
@IndRepair
@IndRepair Год назад
We get ours from Kimball Midwest not really sure what brand they are
@philliphall5198
@philliphall5198 Год назад
What brand is your oil remover and size ??? Thanks ☺️
@IndRepair
@IndRepair Год назад
It is an OEM tools 1.5 gallon (6L) have like it s lot better than any of the other brands I have used. I have been through a lot of them over the years, the OEM tools one is 1 piece construction so it won't leak out of the bottom if you happen to get something that is not good for orings in it
@azimmey
@azimmey 3 месяца назад
I have a 42" timecutter but the adjustments on the handles do nothing for the speed. Going forward it steers left and going back it's much worse going right. 2 weeks old.
@IndRepair
@IndRepair 3 месяца назад
Wow, seems like they definitely didn't get something put together right
@barbershop7277
@barbershop7277 11 месяцев назад
I have a slow leak on my left hydro. I wanted to add some fluid. Should I fill atw to the top??
@IndRepair
@IndRepair 11 месяцев назад
The service manual says "Fill the ZT-2100 and ZT-2200 (EZT ®) so the oil level is .75”-1.50” (19-38 mm) below the oil fill port" That is hard to do if you cannot see the top of the fill port but if you can get it in there this was get it done otherwise the hydro will have to be pulled to fix the leak and refill
@barbershop7277
@barbershop7277 11 месяцев назад
@@IndRepair thanks
@sawmill123456
@sawmill123456 7 месяцев назад
Where can I get a electric schematic for the Toro time cutter???
@IndRepair
@IndRepair 7 месяцев назад
Usually on the Toro website for the model but does not include engine electrical. Do you have a model number handy that you are looking for in specific?
@santiagocarrionrivero7862
@santiagocarrionrivero7862 4 месяца назад
How do I level de deck? The left side it's an inch lower than the right side.
@IndRepair
@IndRepair 4 месяца назад
Go to www.toro.com/en/parts/partdetails?id=53158&iid=462404&pid=511604 and you can see the diagram for the deck lift. If you look at part number 6 it is a bracket with different holes in it. To raise the side that is low install that side in a hole that holed the deck up higher than it currently is. Thanks for watching!
@lopincol
@lopincol 3 месяца назад
Why do you say in the description you can use champion RC12YC but in the video you say it's not the right plug that's in it? I have the same engine and use the RC12YC without any problems but if I need to change to NGK I'll do it. Thanks good video as always.
@IndRepair
@IndRepair 3 месяца назад
I was thinking it was the larger plug BPR6ES and it is not. The plug you are using is just perfect. If you want to switch to an NGK BKR6ES would work perfectly. Thanks for watching!
@lopincol
@lopincol 3 месяца назад
@@IndRepair Thank you! I use 5W30 full synthetic oil because here in Quebec Canada it can get very cold. I fear this engine might be underpowered for a 42inch deck more so if you add a bagger or mulching kit. What is your opinion on its size? Have a good day
@IndRepair
@IndRepair 3 месяца назад
I would agree a bagger kit with this engine would be underpowered
@IndRepair
@IndRepair 3 месяца назад
Mulching engine should keep up well but Canada is a whole another worth away from Central Illinois. The winters have to be hard on them
@MrMpm3001
@MrMpm3001 3 месяца назад
This is crazy. I’ve watched 20 plus toro videos to find a drain on 75740 and the only one (this one) has the guy using a specialty tool to remove the damn oil. Absolutely infuriating trying to just drain this damn thing.
@IndRepair
@IndRepair 3 месяца назад
Definitely so, it seems like they do not want you to change the oil!
@MrMpm3001
@MrMpm3001 3 месяца назад
@@IndRepair so is the suction pump the only option for the 75740?
@IndRepair
@IndRepair 3 месяца назад
@@MrMpm3001 some engines have a drain valve installed. You can find it on page 26 of your manual at www.toro.com/getpub/70680
@MrMpm3001
@MrMpm3001 3 месяца назад
@@IndRepair 🫡
@MrMpm3001
@MrMpm3001 3 месяца назад
@@IndRepair wanted to say thanks again brother. I found the drain valve and successfully drained the oil. Subbed 🫡
@BillyRay-xk7qw
@BillyRay-xk7qw Месяц назад
Want fire.
@IndRepair
@IndRepair Месяц назад
Nice
@sherrischneider2794
@sherrischneider2794 4 месяца назад
Why don't you get a parts manual an get the right plug an stop guessing?
@IndRepair
@IndRepair 4 месяца назад
Same plug specs and length just a different size head on it. They make different version boots of this same engine, which I was unaware of. No need to guess, it's not rocket science.
@ralphgregory7616
@ralphgregory7616 3 месяца назад
Ngk....Period.
@IndRepair
@IndRepair 3 месяца назад
We use NGK in almost everything, only other plugs we use for Briggs is the 796112 and 491055T
Далее
Phasmophobia ► КООП-СТРИМ #16
2:07:57
Просмотров 687 тыс.
TORO TimeCutter Video Owners Manual & Complete Guide
13:19
Proper Way To Tip A Lawn Mower Over
8:50
Просмотров 4,2 млн
Yearly Maintenance | Toro Timecutter Lawn Mower
20:25
Toro Timecutter Zero Turn Mower Tracking Adjustment
3:47