Тёмный
No video :(

MatrixGold Raster to Vector 

Don’s jewelry making and Japan Travels
Подписаться 4,1 тыс.
Просмотров 1,4 тыс.
50% 1

In this video we will use the MatrixGold Raster to Vector command to design and item and place it on a men's ring. I hope you find the content useful in your designing process.
If you are just starting out in 3D printing, I would recommend going with one of these printers at a low cost and get familiar with the printing and adding supports and then maybe level up to a faster and higher priced printer. Keep your cost low to start until you become familiar with everything that 3D printing has to offer. Anycubic Printers and resins:
shareasale.com...
discount code: www.shareasale...
Elegoo satrun 3D printer from Amazon n amzn.to/41CgeDU
Jewelry Casting flasks amzn.to/3tnCQvq
Vacuum Casting Machines from Amazon amzn.to/48b5KxH
Elegoo wash and Cure station amzn.to/47dOOWg
Jewelry tools and supplies amzn.to/3H06zNZ
2D Printers and Resing: amzn.to/3TTclc6
Vacuum Caster Melting Furnace amzn.to/3tOVSeb
Tumbler for castings: amzn.to/3tNBmL6
Other videos that may be useful:
• MatrixGold Award or C...
• MatrixGold, Matrix. R...
• MatrixGold, Matrix, Rh...
• MatrixGold Curve Thick...
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
• MatrixGold Add a unde...
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
• Matrix 9 to MatrixGold...
/ @donsjewelrymakingandj...
@donsjewelrymakingandjapantrave
Facebook Group help: Users helping Users
/ 195166233291059
#jewellery #jewelry #jewellerydesign #3drendering #jewelrydesigner #designer #customjewelry #finejewelry #howtomakejewelry #howtodesignjewelry #howto #caddesign ##3dprintingdesign #3dshoftware #howtodesignjewelry #cadtutorials #3dtutorial #howtomakejewelrytutorial #jewelrymakingtools #highfashionjewelry #3dprintingdesign #3dtutorial #jewelrycollection #jewelrybusiness #caddesign #gemvisiointutoiral #gemvisioinmatrix #gemvsioinjewelry #rhinoceros #freecad #tinkercad #autocad #autocadtutorial #rhinojewerlymaking #gemvisiontutorial #gemvisionmatrix #gemvisionjewelry #rhinoceros3d #tinkercad #autocad #autocadtutorial #jewelry #rhinojewelrysoftware #gemvisionvirtualsummit #matrixgold #transparentbackground #transparent #rhinoceros3d #rhinoceros #rhinojewelrysoftware #rhino #matrix #matrix9 #caddesign #3dprintingdesign #autocad #3dtutorial #3Dmodeling #jewelryguidtoprongthickness #jewelrydesigns #3djewelrytips #3djewlerymodels
*Disclaimer: This video or video description contains affiliate links. That means that I am awarded a small commission for purchases, at no

Опубликовано:

 

20 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 31   
@hate-rid7127
@hate-rid7127 6 месяцев назад
Thank you 🙏
@donsjewelrymakingandjapantrave
@donsjewelrymakingandjapantrave 6 месяцев назад
You are more than welcome. Thank you for taking the time and leaving a comment and for the time watching the content. I hope it helps. Much appreciation.
@jayneweber5510
@jayneweber5510 6 месяцев назад
Fun video! Didn’t know you could adjust the poofyness in “patch”😃cool!👍🏻
@donsjewelrymakingandjapantrave
@donsjewelrymakingandjapantrave 6 месяцев назад
I love patch. I use it a lot on many different things. Thanks for the comment and all your support. It is very much appreciated.
@solohiddinmirzajonov3102
@solohiddinmirzajonov3102 5 месяцев назад
Thank you
@donsjewelrymakingandjapantrave
@donsjewelrymakingandjapantrave 5 месяцев назад
Thank you for taking the time to leave a comment. Appreciate your support and time.
@cansahinoglu
@cansahinoglu 6 месяцев назад
Thanks a lot Don.
@donsjewelrymakingandjapantrave
@donsjewelrymakingandjapantrave 6 месяцев назад
You are very welcome! Long time subscriber and ton of support. Thank you from the bottom of my heart.
@cansahinoglu
@cansahinoglu 6 месяцев назад
@@donsjewelrymakingandjapantrave I thank you for sharing these videos and teaching us new things without expecting any benefit.
@chzaryab488
@chzaryab488 6 месяцев назад
Excellent work sir Thank you.
@donsjewelrymakingandjapantrave
@donsjewelrymakingandjapantrave 6 месяцев назад
You are welcome! Long time sub and tons of support. Thank you so very much.
@AhmetAkbey
@AhmetAkbey 6 месяцев назад
Thank You Don..
@donsjewelrymakingandjapantrave
@donsjewelrymakingandjapantrave 5 месяцев назад
Love the support and the motivation. You keep me going. Thanks so much.
@lev8549
@lev8549 6 месяцев назад
awesome video! thanks a lot!
@donsjewelrymakingandjapantrave
@donsjewelrymakingandjapantrave 6 месяцев назад
Glad you liked it! I hope it gives you some ideas. Thanks so much for taking the time to leave a comment and your support. Much appreciated.
@carinevanniekerk9506
@carinevanniekerk9506 6 месяцев назад
Thank you so much Don. You have changed my life 😊
@donsjewelrymakingandjapantrave
@donsjewelrymakingandjapantrave 5 месяцев назад
Hopefully in a good way. lol this can be done in a multitude of ways. Keep checking back because we will revisit this in the future or something like it. Thanks for the comment and the support.
@ayeshbasrawe2585
@ayeshbasrawe2585 6 месяцев назад
Thank you, it is a wonderful and interesting lesson.
@donsjewelrymakingandjapantrave
@donsjewelrymakingandjapantrave 5 месяцев назад
Just one way to do it. You can also make it in Clayoo or Emboss as well. So many ways to make everything and none of them better than the other. It's all about the final product. Thanks for the comment and all the support.
@discodan2265
@discodan2265 Месяц назад
The realtime spotlight trick was ace man ;D
@donsjewelrymakingandjapantrave
@donsjewelrymakingandjapantrave Месяц назад
Hope it helps. Thanks for the support and taking the time to drop a comment. Much appreciated.
@joaoluizxavier6157
@joaoluizxavier6157 6 месяцев назад
Once again excellent.
@donsjewelrymakingandjapantrave
@donsjewelrymakingandjapantrave 6 месяцев назад
Wow, thank you! Really appreciate that.
@ssskkk9888
@ssskkk9888 3 месяца назад
I always refer to it. I am grateful. Thank you. Let me ask you one question. At 18:32 in the video, when I changed the view of the "Display Models" in the specification of "Cut Bottttom→Right Angele: 150", I saw a slight step in the three-dimensional shape. This is a symptom that seems to be specified for the signet ring of the dynamic command, but from the viewpoint of 3D printing, would it be better to create the lower part of the ring with "1rail sleep" or the like?
@donsjewelrymakingandjapantrave
@donsjewelrymakingandjapantrave 3 месяца назад
If I understand correctly, lol, yes sometimes you get that little kind of pinched at the bottom. Most of the time if I get this, I just cut it out and do a sweep using the ring rail and duplicating the sides of the shank and it fixes it. If that answers your question.
@ssskkk9888
@ssskkk9888 3 месяца назад
@@donsjewelrymakingandjapantrave Thank you for your reply. It was helpful!
@gwtr9481
@gwtr9481 5 месяцев назад
What do you do if patch doesn't go puffy and stays flat even on a low number?
@donsjewelrymakingandjapantrave
@donsjewelrymakingandjapantrave 5 месяцев назад
Make sure you are selecting the edge curve and not the curve itself. Even at a high number you should still get a little puffy surface. You can try setting the Surface U and V points higher or lower and do a preview as well. Also, the sample point spacing. I would just play around with it until you become comfortable and understand the setting and how they change the surface. Make sure you have the Adjust tangency box checked. That will do it for sure. lol
@Kowalczyk00
@Kowalczyk00 5 месяцев назад
Hello! Is there a way to modify the number of polygons a model has? from a high poly design to low poly, ty!
@donsjewelrymakingandjapantrave
@donsjewelrymakingandjapantrave 5 месяцев назад
Yes, there is. Actually, there are many things that you can do for that. I had planned to add that into my Clayoo playlist but didn't want to get too far ahead. But I would try the ReduceMesh command. You can type it into the command line.
@Kowalczyk00
@Kowalczyk00 5 месяцев назад
@@donsjewelrymakingandjapantrave Thank u!
Далее
MatrixGold Halo Ring
36:29
Просмотров 1 тыс.
My Favorite Laser Design Resources (Free and Paid!)
12:00
MatrixGold Organic Ring
1:00:00
Просмотров 686
I Built a Robot to Paint Expensive Art
16:10
Просмотров 654 тыс.
Glass Laser Engraving Remastered - Ultimate Guide
15:35
MatrixGold Convert to Single Span surface
19:23
MatrixGold Fingerprint Wedding Band
14:48
Просмотров 554