Maximize Your Festool MFT/3 Performance!

Подписаться 27 тыс.

Просмотров 27 тыс.

50% 1

This video goes over the tips and tricks of applying a finish to your Festool MFT workbench , basic maintenance tips, and how to super charge it with some wicked cool accessories .. Link below for all used in video.
Be Positive & Stay Sharp .......WICKED Sharp !!!
#festool #howto #workbench
TSO Products : tsoproducts.com/?ref=cwmk4ofe
UJK Straight Edge : tsoproducts.com/measuring-mar...
UJK 20mm Reamer : tsoproducts.com/bench-dogs/ac...
UJK Chamfer Tool : tsoproducts.com/bench-dogs/ac...
UJK Combo Reamer / Chamfer Tool : tsoproducts.com/bench-dogs/ac...
Power-Loc Toggle Clamps : tsoproducts.com/clamping-work...
Power-Loc Connector Dogs : tsoproducts.com/bench-dogs/ts...
TDS 10 Dog Stop : tsoproducts.com/clamping-work...
TDS 13 Low Profile Dog Stop : tsoproducts.com/clamping-work...
Feeler Gauge / Shim Stock : lddy.no/1gpl3
Affiliate for :
TSO Products : tsoproducts.com/?ref=cwmk4ofe
Kaizen Source : www.avantlink.com/click.php?t...
Taylor ToolWorks : lddy.no/1eoy5
DISCLAIMER - As an Amazon Associate I earn from qualifying purchases.
Festool Used :
MFT/3 : amzn.to/3OduhcX
Rotex RO150 : amzn.to/47dkCvp
CT Dust Extractor : amzn.to/3Qzdd3Z
MFT/# Finish Used:
Zinsser Seal Coat : amzn.to/3rPT8fn
Denatured Alcohol : amzn.to/452vhr5
Chris’s AV Gear:
Panasonic 4K Ultra HD: amzn.to/3pXXPzX
Rode Video Mic GO : amzn.to/3vXOJqx
Sony MDR7506 Headphones: amzn.to/3I450g5
SanDisk 256 GB Extreme Pro SD Card: amzn.to/3i0iT4u
Follow Us on the social media platforms :
Website: www.sedgetool.com/
--------
Instagram: sedgetool?...
--------
Facebook: / sedgetool
--------
Tik Tok: www.tiktok.com/@sedgetool?lan...
_ _ _ _ _ _ _ _ _
Green Suiters Podcast: podcasts.apple.com/us/podcast...
SedgeTool is all about woodworking and having a great time doing it. SedgeTool is Brian “Sedge” Sedgeley who brings 30 years of woodworking experience and tons of energy to the team. Derick “Big D” Clements who has NO CLUE about woodworking but is ready to learn. Chris "cameraman" Seibert who films it all! If you want to have a good time and learn something about woodworking, then you’ve come to the right place.
All views and opinions expressed during SedgeTool are explicitly those of SedgeTool. They are not intended to represent any claims, value statements, or opinions of any of the tools, brands, subsidiaries, or parent companies of brands referenced, visible, or mentioned on the show. The SedgeTool team is here for entertainment and educational purposes only. SedgeTool is not a replacement for proper training or safety guidelines as outlined by the manufacturer's owner’s manuals.

Опубликовано:

29 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@MrBohning 6 часов назад

I love this guy, just found him a couple days ago and have been watching his stuff obsessively in my free time (and even playing his stuff on the Bluetooth at jobsites for subliminal learning). The mft sealing is a good idea but I would’ve applied it with a roller in two different directions so that you can get it more even before it dries and then sanded with 600 grit by hand very lightly to eliminate any micro bubbles. Also maybe seal the dog holes with a stain brush after creating the chamfer. Don’t mean to be critical but his level of precision is the reason I’ve been so dialed into his work. I like that he is excited to share techniques but also doesn’t pander to all people that are doing their first project at home thinking they can “figure it out on RU-vid”…..I usually tell clients that I will charge half as much if they DONT try to fix things themselves first.

@sedgetool 4 часа назад

wow...Thanks !!!

@mattro4902 10 месяцев назад

Great tip on the top sealer. Thanks, Sedge!

@sedgetool 10 месяцев назад

You bet!

@coolbugfacts1234 Год назад

I love the power locks, I have a small metalworking vice screwed to a piece of plywood with 20mm holes, so I can drop it anywhere on the bench and secure it with power locks.

@sedgetool Год назад

wicked cool

@robertkrueger3902 Год назад

Hey , shoot I need to go into my shop ......... whew Sedge I thought you raided my shop . I own all of those items and each one is indispensable !! I love every item they work wonderfully on my home built MFT via the UJK parf guide . Love the videos. I love festool live on Fridays as well . Have a wonderful day and thank you for the infectious energy you bring ..

@sedgetool Год назад

cool... I wish I had started using the TSO and UJK accessories earlier .... especially the TDS13 stops

@marcosbatista6227 Год назад

thank you so much sedge for your work, I'm from Brazil and a big fan of yours, always connected to your festool lives, I really admire your knowledge! health!!! as for the ujk hole reamer it is excellent it was developed by peter parfitt a joiner from the united kingdom passionate about joinery just like us.

@sedgetool Год назад

Thanks...I have always enjoyed Peter's knowledge and videos..one of my favorite channels...

@marcosbatista6227 Год назад

@@sedgetoolMine too ❤ thank you dear !!!!

@fixittony 11 месяцев назад

4:03 awesome! I noticed the nail holes in rim of quart….I was taught that trick 30 years ago from an older shop foreman….

@sedgetool 11 месяцев назад

Right on !!!!! My Dad taught me that when I was a kid !!! too cool

@bartholomewgreatpants3425 4 месяца назад

I had a buddy that did that with a 5 in 1 scraper and I was cleaning out the can to use for cut in and didnt realize he did that. I ended up nearly cutting off the tip of my finger. Blood everywhere, customer was cool about it but concerned.

@bestyoutubernonegraternumber1 Год назад

Definitely getting that TSO refined 13 stop! I got the MTR-X from them & that is next. I had to send back my Whiteside undersized bits, they were a bit rusty and when I called Whiteside they said even though I picked the seller, Amazon just picks from a pile of all sellers so send them back & buy direct from a seller instead! So I have to get them again, more-direct.

@sedgetool Год назад

the TDS13 stops are sooooo worth it !!!

@brentprosser7293 Год назад

I do 50/50 mix of wipe on poly and mineral spirits. It dries so fast that you can do an application every hour. I apply the first 3 coats and sand up through the grits to 220. Then I apply 4-8 more coats. I let that cure for 24 hours. I then apply a coat of paste wax and buff off. I use the UJK bit to clear everything out afterwards. It tends to last 2 years and I've seen zero droop in the top because that finish is so hard that it keeps it from flexing. Reapplication is easy. I sand it back to 100 grit and start over when it finally wears out.

@sedgetool Год назад

@davidlloyd2831 Год назад

UJK and TSO have a lot of bench dog items for the MFT. BenchDog from the UK has some really cool fences as well.

@sedgetool Год назад

Cool !! Thanks

@SpencleyDesignCo Год назад

great video sedge!

@sedgetool Год назад

Thanks Eric !!!

@juantascon 4 месяца назад

Hey @Sedge wicked video as usual. Where is the link for those non-marring low profile dogs? Maybe is just my inability, but couldn't find it on the description. Thank you for all you do,

@sedgetool 4 месяца назад

tsoproducts.com/bench-dogs/ujk-parf-dogs/ujk-anti-slip-workbench-protection-dogs/?ref=cwmk4ofe

@MattLitkeRacing Год назад

I picked up a 2x2 from Home Cheapo for my straight edge

@sedgetool Год назад

😬😬😬

@cleonwalters4093 Год назад

Hi Sedge, is it important to check the awareness of the MFT saw system? Thanks.

@sedgetool Год назад

you just don't want a lot of bow if it is critical for your work for the workbench to be perfectly flat .....

@theScamBKLYN Год назад

@sedgetool I'd love you to review the UJK HDF Valchromat replacement top for the MFT sold by Axminster. I've heard real good things, but you have the most MFT experience.

@sedgetool Год назад

Hmmmmmmmm

@BroRiv Год назад

Sedge- "Somebody" did the #1 NO NO and didn't check the depth on the TS55 cordless track saw and went through the MDF-only about a few inches then realized my mistake. Can I put painters tape underneath and fill the hole with epoxy halfway? Is there any trick/video to just flipping the table and starting fresh from the other side? If I only walked on water :-) Really enjoy your tips- They DO help. From Inferno Texas

@sedgetool Год назад

I know several folks that did exactly that and poured epoxy in the cut to fill the void ... make sure you use a tape that sticks really well....

@jbnelli Год назад

Do you think it would be beneficial to seal both sides? I’m thinking maybe it would be less prone to cupping?

@sedgetool Год назад

it could be..I never have and have never had a cupping issue due to not sealing the bottom...... when I flip it over to a fresh top I seal it then...

@toolchuck Год назад

Sedge, I was thinking (Run for the hills🤣) about gluing Formica to my MFT's top. I have some leftover from a desk I made for a friend's daughters during the pandemic as an "Ikea" clone as none where available and she was dead set on a specific design/look. I use a small piece of it on my MFT from time to time to protect it as I work, and then I thought it might be better if it was just permanently laminated/glued to the top. I realize it would be a bit of work re-drilling all the holes, and I would be using UJK's tools like you demonstrated, as I have already bought into their system. I was also wondering how the chamfer tool would work on formica, I would have to do a test on some scrap first to make sure. What are your thoughts Sedge? All the Best, Chuck.

@sedgetool Год назад

Chuck...I personally would not go through all that effort...I cut into my MFT/3 occasionally as I cross cut...

@toolchuck 11 месяцев назад

@@sedgetool Yeah, it would be hard to clamp down to being it is rather slick too. But it would look nice and clean, until I cut it all up. 🤪 I'll try your seal coat method, thanks. All the Best, Chuck.