MCB Trip Problem & Solution | MCB बार बार ट्रिप होने का कारण & समाधान | Electrical Engineering 

.w

You are welcome.. do share this video with others also

Check short in your circuit orsome bad connection

Check current rating of your load

Hay

Good.. do share this video with others

Depends upon load the problem may change

Need more rated mcb

Will try

in our online course

MCB problem or some overload

Need to have more amp MCB

@@NiketShahPlus sir I say only that time trip rest of the day proper work only morning time trip

@@shamshadtrainvlogs ham nehi janta mccb B10, or c10 konsa lagaya, B10 hay to change karke B16 lagaye aur aachi company ka saman jaysa havells, schneider , anchor etc. hamara gharse anchor c10 se kam achhi tara chalta hai.

@@shamshadtrainvlogs use 16-20 amp mcb

Video he mera check Karo playlist me

Over load or over voltage

Need to check things one by one.. it may some small short circuit or device problem

Mins it may be problem of mcb or the rating problem

Try to check it step by step.. one by one check karo

MCB (Miniature Circuit Breaker) tripping after a certain period of time can be due to various reasons, even if the load does not affect the tripping. Here are some common causes and solutions: 1. Overheating: Cause: MCBs can trip due to overheating, which may be caused by loose connections, high ambient temperature, or poor ventilation around the MCB. Solution: Check for loose connections in the panel and ensure all connections are tight. Improve ventilation around the MCB by removing any obstructions and ensuring the panel is not exposed to excessive heat. 2. Faulty Wiring or Insulation: Cause: There could be a fault in the wiring or insulation that causes intermittent short circuits or leakage currents. Solution: Inspect the wiring and insulation for any signs of damage, wear, or deterioration. Use an insulation resistance tester (megger) to check for insulation faults. 3. Overloading: Cause: Even if the load doesn't seem to affect the tripping, there might be a transient overload or an accumulated effect over time. Solution: Ensure that the total load on the MCB does not exceed its rated capacity. Distribute the load evenly across multiple circuits if possible. 4. Faulty MCB: Cause: A new MCB might also be faulty if it has manufacturing defects or if it was damaged during installation. Solution: Replace the MCB with a new one from a reputable brand and ensure proper installation. 5. Earth Faults: Cause: An earth fault (leakage current to ground) can cause the MCB to trip intermittently. Solution: Use an earth fault loop impedance tester to detect any earth faults. If found, identify and fix the fault in the wiring or connected devices. 6. Incompatibility with Devices: Cause: Some devices might have inrush currents or characteristics that cause the MCB to trip. Solution: Check the devices connected to the circuit and ensure they are compatible with the MCB. You might need to use an MCB with a different trip characteristic (e.g., Type B, C, or D). 7. Harmonic Distortions: Cause: Harmonic distortions caused by electronic devices can sometimes cause the MCB to trip. Solution: Use a power quality analyzer to check for harmonic distortions. If present, consider installing filters to mitigate the effect.

Already video he mere channel per WhatsApp per message Karo details deta hu

Shorting problem

Depends upon your load

Check load

@@NiketShahPlus 9 watt led bulbs only, 0.5 watt led bulbs keeps glowing even though the switch is off

may be problem of over load