MD2 drone setup, check and flight 

How to setup the MD2 drone, mount propeller, check radio, and fly safely.
This film starts with an assembled MD2 drone. shop.makekit.no/products/md2
Chapters:
00:00 Motor placement
00:40 Radio receiver and buzzer/battery connection
01:50 Connecting ESCs (servo cable)
03:00 Power on flight controller
03:50 Battery voltage measurement
05:10 Motor layout setup, show motor layout
06:10 Connect motors to ESCs and correct connection of ESC
09:00 Radio control stick directions
10:10 Radio binding
10:30 Radio receiver testing and trimming
15:30 Switches, CH5 and D/R
16:45 Motors CW vs CCW
17:14 The two kinds of propellers
18:40 ACC calibration
19:25 Self level settings
20:45 Arming and testing motors, correcting
23:30 ESC calibration
26:10 About motor speed and drone stabilisation
27:00 How to use the accelerometer and gyro bubble
28:00 Mounting propellers correctly
30:20 Securing cables
31:10 Battery strap
32:16 Battery usage - prevent drain
34:12 Battery discharge curve
34:54 Flight test - how to fly