Playlist of other water projects: • Plant Watering System To show your support Like the video, Subscribe to the channel, and comment something for the algorithm! My Discord: bit.ly/MikaelAbehseraDiscord
Subscribed! ❤ Im wonding what the curve looks like for each system with variable valve, that is not only on off but has a range of pressures and flow rates. And especially how to take dynamic pressure and adjust the calibration valur accordingly... Let me know if you have some insights 🙏 Thanks a lot and all the best!👍
would the flow measurements still be accurate if the flow rate were to change? I am planning on building something using these for a filtering system, however, the filtering system gets slower as the filter pads become more clogged up. But if it's been calibrated then it should still have an accurate reading right? It would just show a slower output? Thanks for the video! I appreciate you keeping in your own errors, we're all human and it's good to learn from others mistakes :) Keep up the good work!
When winding your thread seal tape, you should wind it in the direction the fitting is going on, aka clockwise around it. This will pull the end tight when you screw the fitting on, rather than push the end of the tape out.
I want something like that. We are into manufacturing but we need something to help us set the amount of water needed and it gives us exactly that e.g. if we set 1000ltrs, it releases that exactly and stops. Can we have that?
Would it not be better to include a counter like 74hc4020 to save on interrupts? Use an interrupt at a suitable count value. These hall effect devices are essentially liters per pulse, so the count yields cubic meters easily. Appropriate timers can be used to find flow rates.
thank you for your videeo, does flow sensor can control the pressure of water flowing? IM looking for a valve that can control the pressure electronically.
Glad it helped! thanks for the feedback ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3S1473D2v1o.html as for water control I would recommend this solenoid that can close and open a water source electronically, and maybe pair that with a pressure sensor if thats what your trying to read
instead of replacing my water meter I want to add this to a nearby faucet to track when there's water coming from the city supply, can this be used for that? I'm worried it might track air pressure instead when there's no water flow.
Do you think the air pressure is strong enough to turn it? Maybe you can install it somewhere else we’re going can guarantee water flow. If you can get around that then yea this would work but if it’s a city supply line it might be too powerful or fast of flow for this sensor, that would be my main thing to check