Mechanic Still Can’t Replace Parts! Customer JUST bought it! Chevy Cobalt PT2!

Подписаться 585 тыс.

Просмотров 261 тыс.

50% 1

Worst Engine Ever!! Chrysler Destroys Itself on Startup! • Worst Engine Ever!! Ch...
Visit the Second Channel on RU-vid, RainmanRay Off Duty / rainmanrayoutoftheshop
Follow on Twitter: @RainmanRay4Real
TikTok: www.tiktok.com/@rainman_rays_repairs
Check out my Merchandise (because I don't say MERCH) for Men's and Women's Apparel, MUGS and Stickers! rainmanraysrep...
Support the channel on Patreon: / rainmanraysrepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage for now
Amazon List, must have for any toolbox!
Featured in Video: 18V OCTANE Brushless 1/2 in. High Torque 6-Mode Impact Wrench amzn.to/3pp7mmw
1: Astro Tools 52SL 500x2 Lumen Wirelessly Rechargeable Folding Double-Sided LED Slim Light, & 52SLC 500x2 Lumen Folding Double-Sided LED Slim Light W/Wireless Charging Pad amzn.to/3Jd2h6t
2: Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
3: NOCO E404 12.25 Oz Battery Terminal Cleaner Spray and Corrosion Cleaner with Acid Detector amzn.to/3ILbdjv
My Camera Gear:
Gopro Hero 10 amzn.to/3AaxELe
Hero 9&10 Dual Battery Charger MUST HAVE! amzn.to/3g5KdAT
Flexible Camera Mount amzn.to/3Jywrk5
#brakecleanmafia #wifeunit #rainman #comnissionearned #mechanic #technician #dealer #independent #autorepair
As an Amazon Associate I earn from qualifying purchases.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
”Intro Music by Karl Casey @ White Bat Audio”
Thanks to Jesse for making the intro and graphic for us to enjoy!!!
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”
Customer Customer States Mechanic Fails Engine Transmission Gas Diesel off road race 4x4 street car daily driver scam dealership dealer technician how to

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@jaystax8370 Год назад

Ray... I am so excited for you! You made such an awesome decision to quit that dishonest money hungry dump. As a teenager I worked in a shop, so I know all about the "behind the scenes" stuff that goes on. I have to say, without a shadow of a doubt, that you actually care about figuring out what is wrong and have the tools and skills/knowledge to correctly repair what you find. I am truly in aw of your capabilities and enthusiasm to make the customer's vehicle correct again. I know you will more than likely not read this, but if you do, thumbs up brother. Makes me wish i live nearby. Well.. I'm kinda nearby.. Louisiana.. kinda sorta.

@christopherwilson4003 Год назад

Well said .. 💯

@pallemaniac Год назад

Yup, makes me want to take my car to Ray, and I live in Sweden. 🚙💨😂

@tomtke7351 Год назад

Don't we ALL AGREE!!

@Malte-Micha Год назад

Most shops are like that milk the customer. Greedy they are just like Stealerships or aka car dealerships. I do my own work so I know what is really needed.

@superspinse Год назад

Advertise on the billboard after you employ “ANOTHER”….. the parking lot is full enough as it is!!🤣🤣🤣

@freak5837 Год назад

nice to see a mechanic who doesn't just throw unneeded parts in. I say if you have enough business no need for billboard .

@elmerfrejoles98 Год назад

labor costs is just as good as income for services rendered.

@HaggisMuncher-69-420 Год назад

I'm yet to find a mechanic that doesn't do that. I can work on my car for the most part but still not confident in bigger tasks so although I know what needs doing, I still have to rely on someone else spending my money.

@freak5837 Год назад

@@HaggisMuncher-69-420 I'm lucky that my close friend is a Toyota mechanic and does all my work for a very good price.

@jeffking8642 Год назад

I am constantly amazed at how much work Ray accomplishes 1 handed!

@randalljoslin4582 Год назад

Just imagine how much more he could do with both hands. He would have to film in slo-mo just so we could keep up!

@MaddSweetGT500 Год назад

Haha message of the day!

@donfayetteville3582 Год назад

well one out of 2 got your jest.

@jimalcott760 Год назад

Next step… use feet.😳

@waynerobati6940 Год назад

He's a bit of a handed magician!🤣😂🥰😍

@gcrauwels941 Год назад

You don't need a billboard. Word of mouth is the best advertisement. Beautiful '71 Challenger at the end.

@APerfectToolSifer Год назад

Why is that the cleanest Chevy Colbalt in existence? Paint looks mint, its almost like someone likes that car.

@forgetfulme1719 Год назад

stayed most time in garage under repairs.

@spaceflight1019 Год назад

Wasn't north of the Florida-Georgia line ever.

@SinCitySinner Год назад

I just purchased a 2008 cobalt with 20800 miles for 3 grand a couple weeks ago. The car is mint. The owner put new tires, belt and serviced all the fluids before selling it. I didn't need another car. But i couldn't pass up the deal. I guess I'll keep it now

@APerfectToolSifer Год назад

@@SinCitySinner that's dope, can I have dibs if ya ever do sell it? Haha

@SinCitySinner Год назад

@@misterrichardc The previous owner also had a new a/c compressor put in. I already have a 2011 Impala with 64000. And a 2017 civic with 14000 miles. Just sold my 02 Acura tl type s 317000 miles. Someone stole the cat converter. Wasn't going to spend 3 grand for a new one. I'll probably give the cobalt to my nephew. He starts driving next year.

@GrantWilliams66 Год назад

It's hard to believe that you have achieved all this success and now you are installing your 3rd lift. The way you are expanding the whole shop will be to small and you'll be expanding into a big new facility. You are the best technician and business builder I've ever seen. You and Wife Unit have done amazing work.

@John-dp3ln Год назад

RU-vid income is also substantial. Doing a great job playing the game of life!

@jimalcott760 Год назад

Epoxy floor…👍🏻

@jnmcustomsshoptalk.989 Год назад

I love this comment.

@kurtisstutzman7056 Год назад

As a customer, their communication needs improved greatly...! While my truck was there, it was next to impossible to get them to answer the phone... Also, I was never able to speak with the mechanic(Ray) either on the phone or in person...

@patrickdiehl6813 Год назад

Awesome to see the third life being installed, seems like yesterday you were posting the "I got fired" Video 👍 Name of the last shop that car was in is "95% Repairs", their motto is "Eh, good enough" 🤪

@peterparsons7141 Год назад

Man you do good work! When you said the word never seize or goop on the valve thread, you were drilling. You went the extra mile to save your customer, instead of just replacing the line. Have a great day!

@EyeMWing Год назад

Eh, it's pretty debatable - parts store retail on the hose is under $150, so there's some savings if it needed to be done Today. If it could wait a couple days to order in the part from The Internet, it's all of $50 and thats almost definitely coming out about even with labor cost.

@CG63_CarbFree Год назад

Troy is doing an excellent job keeping the shop clean and organized - even your cart! 😄

@Rekuzan Год назад

Ray is a good teacher, unlike the tech supervising the rookie who did the work on the cobalt originally. Easy mistakes to make when you're inexperienced, but if the master tech doesn't catch them before they go out the door....

@jonclassical2024 Год назад

Pre-Inspection ,Ray makes no money, Post-Inspection, repair parts-cannon dream.....but Dr. Ray is so honest and smart, makes my morning and restores my faith in mankind!

@LabCat Год назад

Ray, it's so great to see you expanding the shop. Honest, "common sense" mechanics are a true joy to find. Maybe someday you'll be like Car Wizard with a nationwide clientele!

@patrickgoodwin3085 Год назад

If I lived close enough to you, you would be my go to mechanic for all my automotive needs. You do great work!!

@davestern2912 Год назад

Me too!

@philipershler420 Год назад

@@davestern2912You do great work too? 😂

@davestern2912 Год назад

I did before I got the "gold watch." Then I stopped work entirely.

@michaelknorr6825 Год назад

On GM, Delco moraine rear brakes, you can do the same adjustment without pulling the wheels. Get up to about, 5miles an hour in reverse, and hit the brakes. The adjustment only happens in reverse, from what I remember.

@annaplojharova1400 Год назад

I would expect you even won't need to drive in reverse, just repeatedly hitting the brakes should do it - after all it is supposed to compensate for the shoe wear even when the car is not reversing at all, maybe it would need just a bit more "hits"...

@CrimeVid Год назад

No automatic adjuster I have ever come across on drum brakes works properly. You can prove this for yourself if you have an external access slot, just do whatever you normally do to make the automatic adjuster work, then see how much you need to do to get them right, just like wot Ray’s doing. One point, Ray backed the adjustment off. In my (limited experience) if you leave the brakes very slightly too tight and drive easy round the block, then check again, you’ll find the brakes are spot on, because a few actuations and plenty of road vibration, makes everything settle down and relax a bit.

@superskrobb Год назад

@@CrimeVid to get the adjusters to work you have to use the parkingbrake,not just slam the trans in park,when you press the parkbrake pedal or lift the parkbrake handle ( or often called ebrake) the brake shoes are moved by the arms innside the drum ,not just the pistons on the brakesylinder, reversing and braking or driving and braking dont matter, that only extend the pistons in the brakesylinder, so the pedal getts lower and lower doe to the extended travel of the pistons,and if your unlucky the pistons wil pop out of the sylinder and all brakes are gone.............. i know by experience

@annaplojharova1400 Год назад

@@CrimeVid The adjusters function is not to be that precise as you can be with manual adjustment. Their point is to keep the slack within reasonable limits the brake system is designed for, even as the shoes are wearing out, without the need of frequent manual readjustment. You may start with precise adjustment from the getgo, but if the adjusters are not actually working, after a few percent of shoe life the slack becomes beyond what the brakes may tolerate and you may get of of the master cylinder range and have brakes to fail or underperform. The problem is, the maintenance schedule for the vehicle is designed with an assumption these things work, so it does not ask for brake slack adjustment work needed when the auto adjuster is not working. It just assumes the slack is taken care of automatically by the slack adjuster and for that the adjuster has to work first... And the adjuster not working is the main concern here, which has not been addressed (at least explicitely, on the video) on this car.

@spaceflight1019 Год назад

@@annaplojharova1400It only works in reverse, because the mechanism is designed to work as a ratchet.

@tuoppi42 Год назад

Since 1st of July 1959, the US pound has been defined as 0.045 359 237 kg. It is based on metric unit, just like the inch is defined to be exactly 2.54cm. Metric, but just a bit awkward special case to please US audiences. 🙂 Thank you for the content, these tropic weather repair videos are really nice to watch during the winters we have in Finland - way nicer than doing any repairs outside in -25C/-13F weather.

@stevenkroot31 Год назад

I think you meant to say 0.45…. kg to the U.S. pound. Same as ~2.2lbs to the kg.

@fumanpoo4725 4 месяца назад

Royal Deluxe...

@SomeRandomHuman717 Год назад

Based on the fact that most previous repairs were botched, upon seeing the rear adjusters bottomed out at the loose end of the spectrum, I would have double-checked against service data to confirm that the auto-adjusters were not put on backwards and are working backwards---IOW they are automatically "un-adjusting" themselves.

@petersmart1999 Год назад

From what I saw,and just did some yesterday the adjusters are in the correct position.

@tlak Год назад

Can't put them in backwards, maybe have one with a reverse thread. Seemed like a Monday/Friday job or somebody that knew the basics of doing the work but not to dial it in or everything was good enough.

@annaplojharova1400 Год назад

The way how the ratchet allowed them to tighten, I doubt they will be "unadjusting". More like the thing that is supposed to adjust it, is not engaging at all. But seeing them clean and without any corrosion (the reason why selfadjusters of various kind stop adjusting), I would also guess they are just assembled incorrectly, or some detail (hooking in something, missing component,...) was overlooked.

@yanni6556 Год назад

Home job for sure

@timjohnun4297 Год назад

They weren't. You can easily tell from the video of Ray adjusting them

@chrisnewbold9876 Год назад

After cleaning dust out of drum, the purpose of rear access to drum adjuster is wind it up until the drum locks up, which centres the shoes. Then back off a click at a time until the drum rotates freely. Takes out the trial and error guesswork adjustment.

@dond.200 Год назад

Congrats on all the success and progress you’ve been able to make at your shop. Can’t believe it only been about 6 months. I can see Rainman Repairs franchises in your future. God Bless!

@Kenjiro5775 Год назад

You are THE mechanic that everybody wants. Integrity for days and the job's not done until it's done correctly. 👍😁

@OGYettie Год назад

Advertise business and RU-vid channel win win

@petermccoll469 Год назад

Great video! On the brakes, those have automatic adjusters, but you have to use the parking brake to make the adjustment. With an auto trans, most people just put it in park, and never use the parking brake.

@boyracer3477 Год назад

Nice discussion and demonstration about the rear drums. I learned a lot. I was watching a car repair video yesterday and the guy would speed up the video whenever he was taking things apart and putting them together. I want to see things DONE to learn how to really do things.

@adotintheshark4848 Год назад

You don't need to cinch up those brakes that way. Those are self adjusting. When it's ready put the car in reverse, back up to 5 mph and tap the brakes, do that a few times and they'll adjust themselves.

@davidballoid2118 Год назад

What, REEEEEEEEEE!!!🧂🧂🧂You could have added 10 Extra Horse Power by painting the Breaks Drums Red and stenciling Brembo over top !😁

@nikolateslax1 9 месяцев назад

11:00 I still laugh so hard because a while back Ray specifically called out everyone going "Oh I bet you wouldn't use the brake clean like that if you were the one paying for it" as he proceeded to do exactly what Ray does, which is maximum shiny, regardless of how much brake parts cleaner it takes!

@aznboycols Год назад

I thought that the drum brakes were self adjusting. Put the car in reverse and tap on the brakes to expand the adjuster.

@GuysPlayingWithTools Год назад

It's not often you can say "nice car" about a Cobalt but it looks good.

@StrongDreamsWaitHere Год назад

Reeee. Metal filings in the system. I wish you had removed the line before you drilled it, that would have allowed you to create and then remove debris without forcing the debris into the rest of the system with the blow gun.

@stevehamilton9418 Год назад

For you E-body guys, I hope y’all got a good look at that nice 71’ challenger! Thanx for the slo-mo on that dodge Ray!👍

@1crustyoldmsgtretired870 Год назад

Plum Crazy convertible, even!

@buckclydesdale Год назад

@@1crustyoldmsgtretired870 Best color in my opinion.

@spaceflight1019 Год назад

Go-Wing, R/T stripes, can't remember what engine options were available but maybe a 340.

@brycestewart3181 2 месяца назад

Most people don't know they should always use the ripem park brake when they park to help keep the rear brakes adjusted.... Thx for sharing....

@AntonioClaudioMichael Год назад

Awesome to see the 3rd lift is going up and thats got to be exciting being it will be operational soon @Rainman Ray's Repairs

@RainmanRaysRepairs Год назад

Wired it up this morning

@AntonioClaudioMichael Год назад

@@RainmanRaysRepairs awesome going to be more efficient now

@deanowens5539 Год назад

Great job Ray as always…also, as another comment stated, no need to advertise as word of mouth goes a long way. I myself only went to you by your reviews and don’t really look for ads. I’m like most, don’t trust mechanic shops until I found you! Congrats on getting the other lift up!

@dans_Learning_Curve Год назад

You lucky guy!! I'd definitely have work done by Ray if I was closer to him! MN is too far away!

@ricanderson5717 Год назад

How about Ray is here wit an arrow pointing down? Noth8ng wrong with helping people find your store😂

@Rekuzan Год назад

Six months in and he still hasn't hit the door-of-death; the TRUE measure of his success!!! 🤣🤣🤣

@brothertheo2677 Год назад

Wait, using brake cleaner .. to clean brakes? Is that even allowed?

@josepherhardt164 Год назад

It's like keeping gloves in the glove compartment.

@Stoney3K Год назад

@@josepherhardt164 Or fixing air ducts with duct tape.

@uninhabitedspace Год назад

Heresy! Blasphemy! Improper allocation of resources!

@drunkingsailor2359 Год назад

Well, yeaaahh, it's brake clean in a can😅

@user-zm6so1vm1o Год назад

I think I would use the billboard. However, boards that are close to a busy 4 lane highway can be very expensive. Secondarily, putting the shop's name on a high billboard next to a busy road will without a doubt bring the fans to your doorstep. The combination of the Wife Unit and her designies along with a tractor trailer full of merch will undoubtedly give a nice lift to the bottom line. It will be important to seperate the retail side of the shop from the greasy side or you will get nothing done because of the necessary greetings you will have to supply to the hundreds of visitors the sign will recruit. Dave Lowa

@pickles5150 Год назад

Or you can buy you own billboard.

@magoolew5131 Год назад

@@pickles5150 That's what I was thinking. Either that, or make one out of wood just to get noticed, then buy one when the money is right. Even a 4 x 8 sheet of plywood would be better than nothing.

@toddb8479 Год назад

Ray here is a trick from Grocery store refer techs. Use a #6 drywall screw to retrieve broken schrader valves.

@glennwhite7906 Год назад

You are right Ray, you should advertise on that billboard, and also on your truck doors and make some 4 color flyers to hand out. Within reasonable limits, the more you advertise the more business you and your shop will get. You have done a good job of expanding the capabilities of the shop with new doors and a new lift. The advertising will help you keep those new improvements making money for you. Good luck!

@davidfarrish9000 Год назад

Good video. Suggestion. By removing the plug on the backing plate you can adjust the brakes with the drum installed. Its faster that way. Also that little pawl that is on the adjuster is the laver that adjusts the brakes when you back up and put on the brakes. That way the brakes are always in proper adjustment, well in theory anyway.

@user-vf7gp1hr9c Год назад

He mentioned that in the video.

@dongeiger4500 Год назад

not the back up,part. When I was a kid may decades ago backing up and applying the brakes was how we adjusted the drum brakes.

@joshruner1348 Год назад

I have found wasting money on advertising auto repair online and locally gets you little to no new business. Your workmanship and honesty travels like wild fires. Why advertising does not work in auto repair? The general public have a stigma against you all ready without knowing you or your work. As a mobile mechanic customers watch me work and I get to educate them on how vehicles work. Its a great experience for me and the customer. Keep up the good work Ray you will be fine without the advertising.

@MonkeyJedi99 Год назад

It doesn't help that so many mechanics either have "game the Yellow Pages" names like AAAA Absolute Best Repairs, or something disingenuous like "Honest Al's Garage. Every good mechanic I have had has been word-of-mouth "advertising". "Hey [neighbor], where do you get your car repaired, and are you satisfied with them?" edit: Another good advertising method is to post some business cards at local diners and coffee shops that have a bulletin board for that purpose. Costs pennies, so even if you only get one referral, it's a steal.

@AntonioClaudioMichael Год назад

Nice work getting that broken valve drilled out and removed from the ac line @Rainman Ray's Repairs

@tindepapp Год назад

I'm so glad, that you are going forward in your business. Love your videos. Keep going man. 😊

@cj3013 Год назад

Ray, at 42:57 and 42:58, I think I can see a blue cap in the cowl where you left the high side cap and your socket. Looks like a low side cap to me!

@Timotheousturalyon Год назад

Was looking for this i seen that too.

@larryjankowski2923 Год назад

I’m a big fan of left handed drill bits for situations like this. It may even have saved that Subaru engine with the snapped off water pump stud. Rather than trying to weld nuts onto it. snap on still sells them I think

@bigj231 Год назад

Viking/Norseman sells a super high quality set of left hand drills and extractors for a pretty reasonable price. They're made in the USA and come in a nice, convenient case.

@MonkeyJedi99 Год назад

I already knew what left-handed drill bits were, but I was splitting my attention when I first read your comment, and thought, "What difference does it make what had I hold the drill in?" Yeah, I need to wake up.

@davesvoboda2785 Год назад

The broken piece was below the threads.

@beezul Год назад

@@davesvoboda2785 Plus, Ray snapped off an Easy-out in the stud, and those are harder than woodpecker lips. Only thing that MIGHT possibly drill thru that hardened thing is a carbide drill bit. Maybe.

@larryjankowski2923 Год назад

True. But lefty bits act like Easy outs and the pilot drill simultaneously. He may not have needed anything else. Just grind the stud flat first. Then a good center punch and some patience. But hindsight is 20/20.

@d46512 Год назад

If you go back and watch the last video where Ray checked the low side port, you can see an O-ring fell out from inside the cap. The last guy knew it was leaking but couldn't or wouldn't replace it

@jamesmoore7106 Год назад

Ray you need to invest in some left hand drills they were really good when you’re trying to drill something out that is already threaded in place with a right hand thread

@jsh6952 Год назад

Yup. Needs to hit up the industrial supply house for those. Either Grainger or a local outfit.

@jamespn Год назад

Nice work Ray, the previous mechanic had a trifecta of mishaps, including improperly installing the fuel pump, not adjusting the rear brakes, and breaking off a schrater valve on an ac line. But I give them credit for the wax and buff, the shiny black plastic wheel covers, and the tire shine. Looks like a typical used car lot shiny mess.

@bilrand Год назад

Be awesome Ray if you do a video on your start up costs, auto labor hourly costs in Florida... information for those who wish to do as you did & start their own auto repair business. Insurance, lease costs, just a ball park series of info for those interested in starting their own business. Awesome what you & your family has accomplished. But also explain how many years you have been in the business. You started out with a great deal of auto mechanical knowledge. Maybe touch upon mechanic licenses you have etc. Thank you, for the videos wow you run into the same issues us backyard mechanics run into working on our own cars.

@nesfinds Год назад

I bought my 08 cobalt for $300 a week ago it runs and drives perfect has 207,000 miles and no engine lights or warning lights, still has a good paint job and leather interior only had to replace front speakers, headlights, rear shocks, and glue some of the interior door panels, I’m hoping it will last for a little while.

@badassbiker1974 Год назад

Good day to you, Ray. Glad you filmed the brake repair etc. I thought you'd forgotten about it from yesterday's video. Definitely advertise on that billboard! Keep up the good work 👍👍👍

@helenault7452 Год назад

More that a few times, I've been able to extract the bottom half of a Schrader core using a tiny slide hammer with a sheet metal screw on the end. It only works when the entire stuck section of the shell is past the threads. I guess I've seen it half a dozen times.

@bryanlatimer-davies1222 Год назад

There is actually a tool for that. It is a tapered left-hand thread that you just screw into the remains of the core and it comes right out .. mostly

@helenault7452 Год назад

@@bryanlatimer-davies1222 I have one of those somewhere; it works some of the time, and it's definitely worth having. Any method that can get the chunk out without putting shavings into the line is a win.

@bryanlatimer-davies1222 Год назад

@@helenault7452 I was very surprised he started drilling, to even consider putting swarf into the system must be an error

@johnkendrick7304 Год назад

Some top-notch wrenching! Your customer is going to be very happy and I hope thankful

@michaelkrysiak5282 Год назад

A cheescloth paint strainer over the end of a tube being "blow out" to find debris will catch pieces you want to find

@Wakeupandsniffthecoffee Год назад

My thought was using an easy out instead of the drill bit to see if you can grab it and unthread it. I may be speaking too early, as I have not finished watching this yet. One thing about replacing the line is no possible metal shavings contaminating the system. But like you, I try most anything except waiting to fix a problem.

@MonkeyJedi99 Год назад

I might have tried reaching down the line with a hook to push the back of the valve half from the backside. - edit: Just saw what came out on the drill bit. My idea would not have worked.

@joez.2794 Год назад

I'm in HVAC and I just about fell off the couch here. Metal shavings, compressed air in an open system? "There is a filter in here..." Yeah, no. Edit: OMG he's blowing compressed air "through" the compressor now. This thing is toast.

@jamesjanusz9782 Год назад

@joez.2794 right?

@Sylencer1982 Год назад

I have a can of Brake Clean at the shop that I inverted and sprayed out all the propellant. Now it's just the vapor pressure of the Brake Clean pushing it out. Really good for getting out enough solvent to work on sealing surfaces when you don't need the physical pressure of knocking stuff away.

@BrianRobinson77 Год назад

Ray, as far as the rear brakes go with this one I think you may be dealing with the Chevy drum brakes that don't work as they should. If it is the problem design then what happens is the rear adjusters never actually automatically adjust. I have first hand experience having owned a 2007 Chevy HHR (which is very similar to the Cobalt) for over 100,000 miles now and trying to figure out why it prematurely wears out front brake pads and even warps the front rotors. I have finally come to the conclusion via my experience and also reading HHR owner forums that the rears do not self adjust thus putting what is normally only about 70% brake stress on the fronts well over 90%. The solution I have come to is that I am just going to have to manually adjust them every oil change or two which means jack up each rear side and adjusting via the access port you show in this video. The lack of proper adjustment is so slow it goes unnoticed by the driver but the improvement in brake performance once properly adjusted is quite noticeable.

@randybeard6040 Год назад

You are So Right, most Drivers these Days Know Nothing about Vehicle Mechanics, they are Totally Helpless, as an Old Fart, I try to help/teach my younger friends about the mechanics of their Vehicles---I always Tell them-Preventive Maintenance will Save you a Bundle of Money in Long Run...

@MrSloika Год назад

I don't know about this car but I had a Mazda MX-6 back in the day with rear drums. The adjustment procedure was to move the car slowly in reverse, and then apply the parking brake. Release the parking brake, move forward and apply the service brake and then repeat the first step. A few times with the forward/backward was all that was needed to tighten up the rear drums.

@sparksalot4950 Год назад

When the e brake takes to many clicks, it's time to adjust the star wheel. Might try backing up and stopping quickly as that is supposed to adjust them, sometimes it works, sometimes not !

@BrianRobinson77 Год назад

@@sparksalot4950, YES, you've hit the nail on the head. With my HHR the number of clicks to set the hand brake is exactly how I can tell it's time to manually adjust the tensioners again. More than three clicks and it's time. With the HHR drums, and probably these Cobalt ones as well seeing as they look identical, the backing up and braking multiple times to auto adjust just doesn't work. Poor design I guess. These are the first drums I've worked on that use that weird upsidedown horseshoe tension spring on the bottom.

@job38four10 Год назад

Sometimes backwards drill bits work better on removing threaded parts. If you put up a billboard you'll need to add a 10 bay garage with 3 more Troys......... And that was a cool car at the end, I'm thinking early 70s dodge........

@edward1967able Год назад

You’re a triple A mechanic mu which is hard to come by and I believe you are honest, thanks for sharing all your videos, I’m a dyi backyard mechanic myself which I don’t know much about cars but been learning by watching you , about the billboard most definitely and more work means you need more manpower.

@mari.s752 Год назад

I used to do a lot of brake work for family, friends and acquaintances. Any time I did drum brakes I got them as close as I could by eye then drove the vehicle in reverse, pressed the brake pedal and let the automatic adjusters do their job.

@annaplojharova1400 Год назад

Shouldn't the adjuster tighten itself after a few cycles on the brake pedal? The same way it is normally supposed to selfadjust for the shoe wear? I get it, it is a good practice to adjust it manually after installation so the play is n9t excessive from the get go, but still after a while I would expect the play to go away by itself. All that unless there is something wrong with the adjusters, like assembled in a wrong way or so... Which seems to me to be the real problem with the brakes: The self adjuster to not self adjusting...

@ricebike Год назад

Hmmm, yeah I recall that you just drive in reverse then apply the brakes a couple times for the self adjusters to close the gap

@RJTC Год назад

I'd guess that they are still set hard against the "closed" position & the spring/ratchet setup is not strong enough to break the nut free from there.

@petersmart1999 Год назад

Only issue is they need to start out even from the get go! Start with low drag,if one is at bottom of adjust the one that is set at top will over adjust.

@annaplojharova1400 Год назад

@@petersmart1999 No. Correctly working adjuster will never overadjust it. Each brake has its own, completely independent adjuster. So unless it is overtightened from the get go when installed, the adjuster won't overtighten it. They are even designed (intentionally) so they stop adjusting when failing. The adjusters are nothing else than some kind of ratcheting mechanism actuated by the shoes travel so the travel should exceed some level for the next tooth to engage. So when too lose, the travel is greater, tooths engage and the adjuster tightens up. When the slack is within spec, the travel is too short to engage the next tooth, so no adjustment is happening at all. At this state it normally spends most of its life, so much the corrosion or other gunk just seizes the mechanism in that position, resulting into adjuster not adjusting for the shoes wear anymore.

@GARDENER42 Год назад

Rainman Ray's Repairs on the billboard would be great. Might not pay for itself work wise but would look cool.

@neilhoganwa Год назад

I was told that the rear brakes re-adjust when you go backwards and hit the brakes.

@davidhamm5626 Год назад

This is true, but lots of people do not back up enough.Pulling through , to park is easier, no worries about hitting stuff.

@superskrobb Год назад

@@davidhamm5626 its easier to just use the parkbrake ,no not the trans lock (park possision on trans) but the actual parkingbrake ( often called ebrake) just hold the realease and pump and if the self adjusters work as they should you wil feel the pedal getting firmer, if you have rear drumbrakes and the brakepedal goes way down,try putting some clikks on the "e breake" if the pedal gets better the rear breakes needs adjusting.

@darkerbinding6933 Год назад

Kind of fun having a car to work on that isn't totally roached out... 😍

@Yawwee Год назад

Good jobs - brakes, A/C, gas leaks, schrader replacements - all quality work. Do miss the wife unit, she adds a touch of happiness, cheerfulness, and smiles to the days work !!!! Shop is coming along, lifts propagating, and work increasing. Praying for your business to flourish !!! 😃💯👍

@donfayetteville3582 Год назад

Ray must have been early mornig when you did the drill bit trick. The drill didn't push those pieces into the line they cut the pieces into slivers. When you went through and then blew out the line those chunks came out-- you probable didn't see it at the time. Anyway you have the receiver dryer right there it will trap it.

@forgetfulme1719 Год назад

soon 98 degrees air comes out.

@aceofarrows Год назад

In a world so full of people who refuse to get things fixed on their vehicles, it's nice to see a "please do more."

@u.p.tinkering Год назад

Another great video Ray! Funny how someone went through all the work redoing the rear brakes to not do the final step of adjusting them. lol Shop is coming along nicely!

@MonkeyJedi99 Год назад

I once got a car at flood sale price because the person who replaced the master brake cylinder didn't bleed the lines afterward, so the owner thought it was an un-fixable death trap. Twenty minutes with my brother in the driver's seat, half a bottle of brake fluid, and a couple of dirty rags later and I had a great car that I should have paid ten times as much to get.

@dans_Learning_Curve Год назад

@@MonkeyJedi99I got a decent car because the owner thought it needed head gaskets. It was a broken lower hose clamp! Never ask for a diagnosis over the phone!

@dans_Learning_Curve Год назад

Knowledge is powerful!! Ignorance is painful!

@hdfxrs9121 Год назад

I picked up a car for $250 because the person's "mechanic" couldn't figure out why it ran so rough. All it needed was a couple of vacuum lines.

@cuzminl Год назад

The way you just droped that cleaner bottle ....uuuufff perfection

@craftyjoey7991 Год назад

Great vid Ray. But save your money on the billboard, they don't work. "Word of mouth" is the best and free advertising there is. So just keep doing a great job and your customers will do it for you :)

@Rolaids1000 Год назад

put sign on your roof and you will get free Advertising......

@ferguscampbell2485 Год назад

These last two video's are the reason I enjoy RRR's videos. My father in law was quoted $1500 to fix his auto gear box, he took it to a retired mechanic who double flushed it and replaced the filter and it lasted him another 5 years till he sold it. the last we heard of it was 3 years latter and it was still going strong. Another mechanic I knew throw in his job because he was pissed off by his boss telling him to clean and reset the ignition points and clean, reset spark plugs. Also clean the air filter, the boss then charged the customer for replacing, resetting every thing. Ray keep up the good work ethic and you will do well.

@randybeard6040 Год назад

Years ago back in the 70's, I knew a Mechanic Shop that did this on Older people vehicles--just ck the points- clean and reset Gap on Plugs and charge them for New Points and Plugs, he got away with this fraud forever...

@BigBen621 Год назад

That "little tab that locks in the adjuster" is actually the automatic adjuster for the drum brakes. These are automatic adjusting, as several others have mentioned.

@TheDrDover Год назад

I miss the dee doo dee doo dee doo from the phone from the old shop. Love your stuff man. Keep up the great work of being an honest mechanic and businessman.

@bryonschue8065 Год назад

Ray, when you scrub the rear axles with an abrasive pad, why not do the inside of the drum also?

@jnmcustomsshoptalk.989 Год назад

A digital Rain Man Ray’s Repairs “GRAVITY” would slay them all.

@Starsnu1 Год назад

Yet another excellent video and customer centric repair! If you need more business, advertise on the billboard, if you have enough and don't need to expand, then no billboard is necessary. I never actually compared those who advertised on billboards with the slimy lawyers who do use them.

@bryantench1178 Год назад

💯 % yes promotion of the shop on that billboard would be perfect.

@StevenDaugherty-uo5cs Год назад

Nice work on the Cobalt. You're always putting the customer first. As for the billboard, it usually pays to advertise and let people know you're there, but it would depend on the cost to determine if it's worth it. Of course it would be a good tax deduction.

@markanderson2904 Год назад

It's not a tax deduction, it's a business expense.

@brycestewart3181 2 месяца назад

You got a pair brother! To even try to save that line you sir are a awesome mech !!!! God bless ya!! Thx for sharing Yes I know this was a year ago,,,,, Hope your life problem goes ok...

@Jackhole_Cat Год назад

Definitely advertise! Get your shop on the billboard with some doodlie dos! Jk... But definitely get the word out! Honest, thorough diagnosis, honest repairs...

@dussreynolds2992 Год назад

I install flagpoles. A nice 50 ft flag pole with an American flag and a custom shop flag would look great going over that bridge

@peted5217 Год назад

It Truly wood be Great

@jessewynne8193 Год назад

Great job on not charging for brakes that aren’t needed! Most or many (seems like most) would’ve said they put new pads on when they didn’t.

@lysanderlysandrou5715 Год назад

The billboard YEAH BABY! Rainman rays auto repair, as seen on youtube! with an arrow pointing down at the shop.

@nicooolito Год назад

RAY! 12:50 installing smudges on the seats broke my heart!

@jeffwhite9001 Год назад

Those rear brakes are auto adjusting, apply brakes while in reverse, actuates that lever that you levered away to adjust them. Or applying the park brake adjusts them on some vehicles as well.

@h.faberrariusroot2226 Год назад

when you said: "..need a special 8-sided socket" - my first thought was visegrips!

@samshearer6955 Год назад

When our fleet transitioned from basic E-250’s to Transit 150’s they came with power windows and locks and a key fob. I was forever pulling into a drive thru and cranking an imaginary window crank. Some nights when I got home I’d walk up to my front door and click unlock on the key fob, it never worked. I only read billboards on the interstate when I’m looking for food, once when I needed a replacement tire before Google. The ones in town are mostly lawyers, if you need one of those they send resumes to your mailbox real quick. Sometimes they put hot chicks on billboards advertising businesses, those catch my attention. ;)

@user-jn4vp8ub6n Год назад

Absolutely get your name (and/or the business name) on that outdoor ad space. Many people need an honest, skilled technician - rven me, with a lifetime of tools and experience, lost access to a lift and somehow got old when I wasn't looking.

@jimsix9929 Год назад

love the way you clean the hubs Ray, it is important

@V.is.for.Vae.Victus Год назад

Definitely "repaired" by a novice before. Failed to adjust rear brakes, failed to lock all tabs on fuel pump retainer, painted hubcaps but failed to paint wheels underneath. Good times.

@Saichen Год назад

I think those are the OEM rims and they have plastic hub covers that screw onto the lugs from the factory...To get the effect of the hubs they've got, you'd need new rims too. Seems several things on this were done about 3/4 of the way and given the "good enough" seal of approval.

@petersmart1999 Год назад

Most likely it went through a cave -n-pave body shop! My friend does that kinda work,stuff rot hole with t-shirts and glass over it,cheap supplies,paints over unprepped surfaces,still uses laquer primer,paints wheels and hubcaps! He averages 6 cars a day at 3 to 5 hundred a each for dealers and wholesalers,its all about money

@V.is.for.Vae.Victus Год назад

@@Saichen Of course they're OEM. The mistake was painting the hubcaps, and not the steelies underneath. Black on rust is not a good look. At bare minimum they should have flat blacked the steel wheel as well, even though they decided to switch the hubcap color from satin silver to gloss black. Realistically, no car should come with steelies in today's day and age, unless it's intentional nostalgia with trim rings and baby moon centercaps, or standard police issue type stuff. Stock alloys aren't that much more expensive.

@V.is.for.Vae.Victus Год назад

@@petersmart1999 probably. Either way, not cool.

@jormalonnberg1578 Год назад

That 1970 Dodge Challenger R/T convertible was nice You do care of your customers, saving their money for good base service to their vehicle, like oilchances, filters, brakes, those important things to keep it safe to drive on roads. And they are coming back also.

@AntonioClaudioMichael Год назад

Not bad on the rear drums And assemblies just some cleaning and re adjustments that is nice also just some maintenance @Rainman Ray's Repairs

@golf25radioman Год назад

I look forward each day to seeing a new video from your new shop. I watched you service the rear drum brakes on this Cobalt. And the method you used for adjusting them was how I remember doing them. I like to find that you do many of your servicing the way I did; sort of a confirmation for my work. I don't know how you learned, if you had a mentor, etc. However you learned, my opinion - you learned well. Your customers get quality service - again, my opinion. I would love to have you as my mechanic. Keep up the good work!

@alwhitesell4023 Год назад

A four way tire valve tool has a easy out end to pull out broken stems and also can tap the threads.

@waleyefish9026 Год назад

GM had a massive recall on the 2007 Cobalts ignition switch. When you enter the VIN in your computer does it tell you about the recall. According to the recall the switch will work but not the Air Bags.

@ganterpv Год назад

Re the broken Schrader valve, I would have put a dab of hot-melt glue on the end of that torx driver to enable the loose threaded portion to be pulled gently back to engage the thread. When that didn't work, as some of my bright ideas don't, I would have hammered in a screw extractor, which should be tight enough to pull back and engage the thread. If I had a fragment in the line, I would put a rag over the end before blowing it out to prevent it disappearing into the distance at high speed.

@richardsmith2721 Год назад

What's awesome is this car has the same steering wheel as the C6 Corvette.

@jamesfatula5824 Год назад

I have same car 2005 all factory untouched original equipment nearing 200k miles same ac,alternator, same transmission and rock solid engine that sound good I never had issues with it it's a good well maintained car

@jimdavis6833 Год назад

When you were removing that Schrader valve, only on the last attempt were you drilling clockwise. On all the previous attempts, you had the drill in reverse.

@peteowens3033 Год назад

I use to sell outdoor advertising back in the 1990s. Back then it was one of the most cost effective advertising medias around. ;-)

@AntonioClaudioMichael Год назад

Twist handle ratchets come in handy for tight spaces haven't seen the Stanley in ages I have the bostitch model ratchet which is Stanley @Rainman Ray's Repairs

@donsmith9478 Год назад

That 'lost' cap on the low pressure side was black, and you removed it around 13:20. Having to drill out the rest of that valve core and then blow it out reminds me of a rebuilt engine I had delivered to my house in the '70s. I had to use a drill and my vacuum to suck out debris that the rebuilding shop had not removed from the oil return holes in the engine heads.

@donalddrake6512 Год назад

Billboard advertising alongside a busy thoroughfare is never a bad idea. Go for it!

@TXCherokee Год назад

I think it would be awesome to get RAINMAN AUTO REPAIR on billboard. You might have to hire more mechanics and add another building. The Sky is your limit