Mechanical Engineering Technical Interview Questions And Answers | Mechanical Engineer Interview 

module= inner pitch circle diameter / no of teeths M=D/T M=300/60 Module=5mm

Very helpful video bhaiya least count of verniyer & scew Guage

Thank you for info, As per your last question's answer its that Module=D/T(300/60=5)

आप बहुत गजब पढ़ते हैं लग्जरी वाली लयक पढ़ते हैं जो हम लोगों को चाहिए हम लोगों को बहुत बढ़िया समझ में आ रहा है जो आप वीडियो के मध्यम से समझते हैं धन्यवाद यू वेरी मच सर

this is very important video, keep uploading

This video is very interested me thanks for giving me knowledge At lost Answer is 300/60 =5 🙏🙏🙏

Module 5 thanks for guidelines

Useful and informative videos. Thanks bro..

Wonderful explanation💯 👏🇮🇳

Thank you so much sir ...this is a very ionic explain .... Module=D/T(300/60=5)

Very helpful sir ... thank you very much

M = D/T 300/60=. 5ans Very imt video for mechanical engineer sir Thanks for this video 🙏🙏❣️

Thanks sir for a wonderful video ☺️

Module=Pitch circle dia/no of teeth Module=300/60=5

Very good mechanical super visor ka question & answer Jada korke dijiye.

Module =D/T ,300/60=5 ans

Bhut hi helpful vdo hai mere sare doubt clr ho gye, thanku 🤓

Thank you aap video k wajah se mere interview pass ho gaya😂😂😂

Thanks for wonderful video 👍

Thank you sir aapka video Mujhe Achcha Laga

I'm very much inpressed and by watching this video i subscribed your youtube channel

I am very happy sir your concept ..♥️♥️♥️

Very good informative q n ans

Module=Pitch circle of diameter/no.of teeth M=D/T =300/60 =5

Ans. Module= D/T =300/60=5 thank u sir for this video

Module =D/T (300/50=5) is answer . Thank u so much sir for this video ..

Thank you sir

Tq for this wonderful information And last question answer M=d/t M=300/60 M=5

Sir your explanation in mechanical equipments are very good and any one can understand this clearly... If you have time then please explain about Inside Instruments of hydrolic motors and about power pack in hydrolic system.....

Very nice sir plz isi tarhan ki r bohot c interview related r technical videos banain main aap ki videos bohot zyada daikhta hun and plz if possible kuch design side ko bhi cover karain means important calculations. thanks!

Thank you so much sir 💗

Module = pitch circle diameter /number of teeth M=D/T M=300/60 M=5

Your video's are very helpful to us 🔥🔥...can you make video on mechanical design engineer

Thank you very much, it would be really good for sharing English videos after that. I’d really like to watch every video you have sent

Thanks you sir mai abhi tk kisi or hi duniya me ghum rha tha

Module=5, thank you sir!

M=D/T So module is 5

T=60,D=300mm,M=? According to law, we know that, M=D/T or, M=300/60=5mm Final answer Module=5mm

Thanks

👍👍👍👍

Module=pitch of diameter/number of teeth M=? D=300,T=60 M=D/T =300/60 =5 So M=5

M=pitch circle dia m/number of teeths M=D/T M=300/60 M=5(module)

Module of gear,M=D/T =300/60 =5mm Ans

Thank you sir and the last question answer is M= D/T = 300/60=5

Thank you sir ji 🥰🥰🥰👍

Thank you sir aapke video ke vajaha se mera ho gayaa ❤

Mera कल इंटरव्यू हे इसलिए vidos देखने आया हो ❤❤ ओर kon कोन देख रहा है❤

Gajab sir

Love you sir ...

Modul=5mm

module = pitch circle diameter /number of teeth M=D/T M=300/60 M=5

Thank you sir 🙏🙏🙏

Nice video

Module =300/60=5

Module - 300/60 = 5

Good

❤ very nice 👍

Module of gear = Diameter of pitch circle/ Number of teeth = 300/60 =5 ans.

Module= pitch circle diameter/no. Of gear teeth = 300/60 = 5

Thankyou Sir 🙏😀 m= D/T = 300/60 = 5mm

Awesome 👍

M=5(D/T) 300/60=5

Module=D/T :300/60 :5

Awesome video sir❤

What is stress and strain? How are they related? Explain the difference between tensile stress and compressive stress. What is the Young's Modulus (Modulus of Elasticity)? How is it defined? Define Poisson's ratio and explain its significance in material behavior. What is the difference between brittle and ductile materials? Can you provide examples of each? Explain the concept of shear stress and shear strain. How is bending stress different from shear stress? Describe the process of calculating the maximum bending moment and shear force in a simply supported beam loaded with a point load at the center. What is the difference between axial load, shear load, and bending load? Explain the terms "yield point," "yield strength," and "ultimate strength." Discuss the importance of stress concentration in engineering design. How does the presence of notches or cracks affect the stress distribution in a material? What is Hooke's Law? Under what conditions is it applicable? Describe the behavior of a material under elastic, plastic, and elastic-plastic deformation. Explain the concept of fatigue failure and how it differs from other types of material failure. What is the significance of the S-N curve in fatigue analysis? Discuss the concept of creep in materials subjected to prolonged loading at elevated temperatures. Explain the difference between static and dynamic loading on a material. Describe the Mohr's circle and how it is used to analyze stress states. How does temperature affect the mechanical properties of materials? What is stress and strain? How are they related? Explain the difference between tensile stress and compressive stress. What is the Young's Modulus (Modulus of Elasticity)? How is it defined? Define Poisson's ratio and explain its significance in material behavior. What is the difference between brittle and ductile materials? Can you provide examples of each? Explain the concept of shear stress and shear strain. How is bending stress different from shear stress? Describe the process of calculating the maximum bending moment and shear force in a simply supported beam loaded with a point load at the center. What is the difference between axial load, shear load, and bending load? Explain the terms "yield point," "yield strength," and "ultimate strength." Discuss the importance of stress concentration in engineering design. How does the presence of notches or cracks affect the stress distribution in a material? What is Hooke's Law? Under what conditions is it applicable? Describe the behavior of a material under elastic, plastic, and elastic-plastic deformation. Explain the concept of fatigue failure and how it differs from other types of material failure. What is the significance of the S-N curve in fatigue analysis? Discuss the concept of creep in materials subjected to prolonged loading at elevated temperatures. Explain the difference between static and dynamic loading on a material. Describe the Mohr's circle and how it is used to analyze stress states. How does temperature affect the mechanical properties of materials?

Super bro . I have a doubt about what are the numbers 220,320&460 you mentioned in oil used in industrial gear boxes indicate

Good information

Thanks you so much you do more video this type of knowledge

Module=pitch circle diameter in mm/ no of teeth =300÷60=5

A Vernier scale on a caliper may have a least count of 0.1 mm while a micrometer may have a least count of 0.01 mm.

Very good sir.

Good ❤

M=d/t M=300/60 M=5

D= 300mm T= 60 300/60 = 5 Module Is = 5

thanks bro, now i am placed with the help of your video.. 🤗

M=D/T(300/60)=5 is answer . Thank u sir

M=D/T M=300/60 M=5MM

Very good video

Nice explain 👌

Thank you so much sir for explaining... This is so informative vedio I like it ✌️ D=300 T=60 M=? So M=D/T , M=300/60, or M=5 Answer ☺️

Pitch diameter=300 No of teeth=60 Modul=? M=D/T=300÷60=5 M=5 Ans

Nice Video

Very nice 👌

Module = pitch circle diameter/no of teeth So 300/60 =5 Ans :- Module=5

Very nice Sir

सर आप तो कमाल है

Pich circle diameter- 300mm No of teeth - 60 Module - 5

60×300=5 Very interesting video sir thank you so much sir ❤❤❤❤❤❤❤

Module =inner pitch circle diameter/no of teeths M= D÷T = 300/60 =5mm

Ty bhai sir kya bolu

Module=inner PCD/No. teeth M=D/T M=300/60 Module=5mm

Module=pitch circle of diameter/no.of teeth M=D/T=300/60=5

Pls upload more interview questions type videos.

Sop ke bare pe ek video banao.. Pichel bar me tata steel geya tha mujhe tecnical qustion puche hin nahi only safety ke bare me puche sop kya hai blue lock kya hai bagera iske bar epe video banao

Module=Pitch circle diameter/number of teeth M=D/T M=300/60 M=5mm

Module - 5

Module 5

Sir module 5mm hoga iska 😍 thankyou sir.

Brother ap nai 2 instrument ke mcqs batai ye batai ke ham use kis purpose ke lye karte hai?

Pich circle diameter-300mm no of teeth -60 module -5