I just fixed my wires. Wasnt hard. Wires are small and a lil aggravating. Best advice is wiring 2whites 2 blacks. on the lbz 6spd with the manual shifting. the 2 whites are tow mode button and dont matter just hook those back together either way and the 2 blacks are shifting I got mine right but if u dont just switch them.
I looked at 2 lb7’s (FL and in PA) that had this wire broken and some dingaling took the broken wires and put them to a switch drilled into the dash. Ugh. Thanks for showing me how to fix this properly!
I repaired the wire, it works fine. The only issue is this wire was hard to work with. Probably easier to replace though if you are not a patient person.
Thanks for the video Eric! Been a customer a customer for years.Here recently on my 02 when i start the truck and put it down into gear the doors are not locking,but down on the floor board /fire,wall I hear a maybe like some clicking,does the gear selector arm need replaced to fix this issue?
Have a problem took out my transmission my 97 Chevy Silverado to put a bracket between engine and bell housing I fix that now I put it all back together and I get nothing my engine will start but no drive or anyting check the transmission fluid that's all good looking for suggestions
Hard to say but the fluid level is good, make sure the linkage is hooked up and adjusted correctly. Also, if 4x4, be sure the transfer case is not in Neutral
