Mellow Fly 24V/48V HV TMC5160 Pro V1.2 Stepper Motor Driver StepStick SPI Silent come back

Подписаться 1,2 тыс.

Просмотров 3,6 тыс.

50% 1

Boo！Get ready to pick one? Please stay tuned.
Gear Up! Mellow FLY HV-TMC5160 PRO V1.2 has come back!!!
Is suitable for the external drive switching module
Use to ordinary Drives/SPI Driver (TMC2130/5160, etc.)
Upgrade
Double capacitance, 12V chip power supply
Add a separate VSA power supply port
VSA power supply uses 12V power supply by default
Add a 470uf capacitor Add a 12V power chip to the supporting small module
Used to supply 12V to VSA of 5160
🛒link: www.aliexpress...
More info can follow our channel:
3D MELLOW (FB):
/ 395979321769632
3D MELLOW (Twitter): / 3dmellow
3D MELLOW (Discord): / discord

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@haley8004 Год назад

Like the makerbase board but with lower voltage tolerance

@valdolandar534 Год назад

Makerbase use mosfet WSP16N10 with a limit of 100 volts in datasheet of mosfets.

@pooyahesabi Год назад

I bought 4 of them but they don't work for sensorless homing right? for annex K2, The Diag0 and Diag1 pins are not connected to the smaller board

@nadir3D Год назад

can i use this with my existing board? i have BTT PRO and a BTT Octopus

@valdolandar534 Год назад

What mosfets use Mellow Fly ?

@Deluxa801 Год назад

Is there any incompatibility (or a features in the settings?) on the other manufacturers boards? I try this drivers with Octopus Pro/Klipper and no way to move them or I'm doing something wrong? Got constantly this in any configuration that I can imagine. (Unable to write tmc spi 'stepper_x' register GLOBALSCALER) Thanks.

@clenismaralves9080 7 месяцев назад

managed to solve? I have the same problem on a spider 3.0 card. can you help me?

@tonysplace8009 2 года назад

Let us know when there are more boards in stock ☺️

@3DMELLOWPrinter 2 года назад

Hello Tony, would you join in our FB group, here we always inform when goods come and new giveaway activites, thanks : facebook.com/groups/395979321769632

@3DMELLOWPrinter 2 года назад

Hello Tony, check few on stock, be fast: www.aliexpress.com/item/3256804043118800.html?spm=a2g0o.detail.1000023.15.31a9640ehW9gD9&gatewayAdapt=4itemAdapt

@rickverhoeven1064 2 года назад

When will there be more on stock?

@3DMELLOWPrinter 2 года назад

@@rickverhoeven1064 Hello Rick, would you join in our FB group, here we always inform when goods come and new giveaway activites, i will inform you when it comes thanks facebook.com/groups/395979321769632

@3DMELLOWPrinter 2 года назад

@@rickverhoeven1064 Hello Rick, now have few on stock, check and be fast: www.aliexpress.com/item/1005004229433552.html?

@lamedarkangel 2 года назад

will it work with another UART driver (like tmc2209) ?

@3DMELLOWPrinter 2 года назад

hello friend, for tmc5160 pro need use SPI, tmc2209 need use UART, Thanks

@lamedarkangel 2 года назад

@@3DMELLOWPrinter got it, the point of the question was can i use them sumultaniously?

@LongTailWoodcraft Год назад

@@lamedarkangel That depends on your controller board, but most likely not. I don't know of any that let you specify different control protocols for stepper drivers.