Melting 40 Pounds of Scrap Aluminum for Resale 

I appreciate that! thank you.

Our pleasure!

Much appreciated. thank Joseph.

no I may have to check into that

Glad you enjoyed it. Hope to get some time soon to get back to melting aluminum

thank you, a lot of pouring action had to cut some of the video out to keep it from being 2 hours long

thank you try to keep it simple

I am working the small stuff out of the stock tank but I do have a few big pieces in it, I have a pile of mower motors to melt some are off of riders. and I have a few car motors that have a lot of aluminum on them

yeah I need to check with ArtbyAdrock and see what he charges for a custom coin mold, stay safe Duane

@@Okiescrapper You too my friend.

Hello Allen, good to see you back, getting some rain as I type this. another storm moving past us, the worst part of it is east of us so it should be ok, we went to the storm cellar the other night. but only got a little wind and rain, the power didn't even go off. made out well on that one

it may work with a coat of rigidiser over it. not sure if it would last or not, Kao wool it what most use. the blue furnace I used perlite and Portland cement. but it is starting to break off on the inside, I am about to make a new one using dry refectory I hope I have enough of it I may need to buy another bucket of it to make sure

I will have to check into getting a mold made I like the idea of a double sided mold.

yes I use old motor oil and mix it with the oil from the ac compressors that I cut down. I mix about 8 oz. of kerosene with it to help it burn good. I have an oil burner play list. there is a video I did about 6-8 weeks ago where I rebuilt the burner, and I had all the pieces laid out on the table so you could see how it was put together, and I have the siphon nozzle on my amazon page

very nice outside today 68 sunny and 6 mph wind

Thanks for the visit, just checked out your channel and hit the sub button. took me a year to get monitized, hopefully you can do it faster

@@Okiescrapper i appreciate that buddy! Thanks for subscribing to the channel!! And I’m trying I’m excited for how many I got now it’s exciting because I was never expecting to have people would even wanna watch my videos it surprise me!

yes I have it setup for that, and I can add water as I go, to keep the water from getting hot. but I need to raise the area, so that I can make a path for the water to drain away without making a muddy mess of the area

@@Okiescrapper nice

yes there is. this is the most that I have ever had on hand at one time. and I want to get more stockpiled. if I get the time. when the weather warms up the sand casters may get out and want to cast something so sales may go up

I have a video of the build and a rebuild video in the playlist ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UAljaQ_-Tbo.html

@Okiescrapper awesome I check it out right now brother thank you

yeah, I don't like how close I have to hold the thing to clamp down good, can get a bit hot on the hand sometimes, the crucible looks to be a #6 8 kg. www.amazon.com/dp/B00FBG3ROO?linkCode=ssc&tag=onamzallenhar-20&creativeASIN=B00FBG3ROO&asc_item-id=amzn1.ideas.35A7I3E8G3UT3&ref_=aip_sf_list_spv_ons_d_asin

I use the melting pot so I don't have to cut the stuff up to fit into a crucible. I remelt the cupcake ingots. and remove the slag. the way the melting pot it setup with gravity drip some trash may fall into the ingots too. that is why i remelt in a crucible. I don't de-gas but if the end user want's they can do that when they melt the ingots. I make small ingots so they will fit most any crucible out there

not at all I sell them for $39.95 for a 10 lb. lot, after shipping and eBay fees I get about $26.00 there should be a link to my eBay store in the video description.

hard to say. they come and go

I used to use the chest and head mount for the go pro but people complained about my breathing so I quit using the mounts. I may go with a lapel mic if they figure out why I breath hard. they checked out my lungs and all looks good the listened to them x-rayed them. and I even took the breathing test at the hospital. all came back good, I have an appointment the 17 of this month they want to do some tests on my heart. and see it that could be the cause, I will see what I can do about the sound on the sub/like video

Thanks 👍

thanks for dropping in

it works for what I do

Thanks

it's a 3/4 inch pipe thread hole, threads are rusted away, it plugs at times so I have a propane torch to heat it up. in the hot summer I never had any problems with it cooling off and plugging the hole

I sell them on eBay, some guys may stack them, others use them to cast items

@@Okiescrapper interesting to see

oh no, some of the guys I worked with got covid and I am not sure if they are over the aftereffects yet, one guy was having a shortness of breath for a few months after. looks like you have some catching up to do, just go to a play list and click play all turn off the sound and go about your day. Hope you have a full recovery very soon

well I make money from the views that I get on RU-vid, and I sell the ingots on Ebay 10 lb. lot for $39.95, after fees and shipping I make just over $26.00. not a lot but I am retired. so it supplements the social security.

@@Okiescrapper ok, thanks for the reply. Really enjoy your videos. I do scrap for a living and my neighbor melts 100lb ingots. Was just curious about that market. Good for you getting 2.60lb for aluminum

I think it is about 1221 F. if I remember right lead melts at around 600 F.

@@Okiescrapper yeah 621-625 for lead ! I usually pour at 700 -720 !

yeah, I wanted to do it and started to get the stuff together. and when I had all the stuff it took me a while to really get going with it, just really have to pay attention to safety

I could get 10 to 15 cents a lb. as aluminum breakage, or melt it into ingots and sell 10 lb. lots for $39.95 on eBay to guys that need aluminum to melt for casting, you can check out my eBay page if you like and see that I am selling at that price. My eBay Page www.ebay.com/usr/allen-p Thanks for watching

Thanks for stopping by

Почему молч ИГ какда залеваеш лайк🙏💕🙏💕🙏💕🙏💕

I knew I was going to do a lot of trimming of the videos to shorten the length of the video