Mercedes-Benz Drive to Workshop Without Changing Gears - YOUCANIC Scanner

Подписаться 57 тыс.

Просмотров 45 тыс.

50% 1

Buy YOUCANIC Pro Scanner
www.youcanic.c...
Get Factory Service Repair Manuals & Specs
www.youcanic.c...
Ask Car Questions & Get Help
www.youcanic.c... This video is an instructional guide that provides Mercedes-Benz owners and mechanics with the necessary knowledge and skills to drive their vehicles to the workshop without changing gears using the YOUCANIC scanner. The video is designed for Mercedes-Benz owners and mechanics who want to learn how to drive their vehicles to the workshop in an emergency or for maintenance. It features a step-by-step guide on using the YOUCANIC scanner to put the transmission into a mode that allows the vehicle to be driven without changing gears. The video also provides valuable insights and tips on Mercedes-Benz transmission maintenance, including identifying and troubleshooting common issues such as sensor malfunctions and electrical problems. The visuals and audio in the video are clear and easy to follow, making it an accessible resource for novice and experienced mechanics. Overall, this RU-vid video is an excellent resource for anyone looking to drive their Mercedes-Benz vehicle to the workshop without changing gears using the YOUCANIC scanner.
Here we use the YOUCANIC scanner to diagnose the problem. The issue is explained in detail here:
www.youcanic.c... 👉 Buy *Powerful Diagnostic Scanner*:
www.youcanic.c...
A Full System Diagnostic Scanner that works on all vehicles. Can read and clear codes from any system, module, control unit including engine, transmission, airbag, ABS, traction control, climate control, blind spot monitoring, air suspension, door modules, immobilizer just to name a few. Bidirectional support.
🆘 Get help with your car questions:
www.youcanic.c...
📧 Contact Us
www.youcanic.c...

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@ricardogarcia6299 10 дней назад

Hi, I wonder if you could tell me the model number of your YUCANIC scanner. I have a 2007 Mercedes Benz S550 that went into the "Drive to workshop without changing gears". I have replaced the ISM module twice and both of the ISMs have been programmed with the data of my old one, but still showing that message, plus battery symbol and the ESP not available or inoperative. When I try to start the engine it does not crank, and the gauges move randomly and the radiator fan goes into hi speed mode, once I turn the ignition off, I hear the ISM module cycling internally but the gear selector on it does not move in neither one of the new ISM modules. Do they need to be re-learned after being re-programmed?. I used to own an auto repair service many years ago but this problem is out of my league. I have followed your awesome video step by step but I have not succeeded yet. Please help. THANK YOU.

@ziegle9876 Год назад

The Mercedes Engineer who decided on this "ISM" instead of a reliable mechanical link needs to be tarred and feathered. Or even better, have the ISM in his car fail at night at 10F with a 50mph wind outside somewhere in the middle of nowhere on an intersection where the red light camera takes a picture of him every time the light changes, without being able to start or move the car.

@gabornyerges4801 11 месяцев назад

👌👍✌️

@jukes31ryanable 5 месяцев назад

I feel your pain

@ziegle9876 5 месяцев назад

@@jukes31ryanable A few thousand dollars and many computer-advised module changes later we found the issue: A canbus wire insulation was degraded, and shortening out intermittently somewhere behind the instrument panel. Fixed it, now everything good. Root cause: "biodegradable" wire insulation.

@malchazmichael949 7 месяцев назад

Hi... my car is now in the parking lot and it won't go into neutral, R, or D. Is there a way to put it in neutral... to tow it to the garage? W221 2008

@YOUCANIC 7 месяцев назад

Hi, It sounds like you're having a tough situation. Our YOUCANIC Full System Scanner might be able to help diagnose your car's issues comprehensively. Find out more about it here: www.youcanic.com/scanner. Further, we also have a platform for any car-related questions you may have at www.youcanic.com. Our mission at YOUCANIC is to make car repairs understandable and accessible. We have a variety of resources to support you on your automotive journey, including OEM Factory Repair Manuals. Feel free to investigate more on our website www.youcanic.com/. Don't hesitate to reach out for more help!

@ziegle9876 Год назад

The issue however is to get the "start authorization" enabled. If the scanner could do THIS, it would be really helpful. But when we got to that part, the video stopped.... Because it can't?

@tepelena Год назад

No scanner is going to emulate the drive authorization and allow engine start. You need to fix the issue.

@Bizzzness_not_urs 7 месяцев назад

It’s a ground a fuse just fixed mines outside no part’s needed

@akachukwujonathan4055 Год назад

The vehicle have been packed for few months..... What's the solution to this?

@ziegle9876 Год назад

Disconnect all batteries (the main and the little backup) completely, let it sit overnight, that did the trick for me.

@anassubki4424 6 месяцев назад

Hi my friend. Good job. I have a question for you

@YOUCANIC 6 месяцев назад

Hi there, thanks for your kind words. At YOUCANIC, our goal is to empower car owners like you to handle vehicle issues confidently. We offer the YOUCANIC Full System Scanner which is a reliable tool to help identify your car's problems effectively [www.youcanic.com/scanner]. Apart from this, we provide OEM Factory Repair Manuals and an interactive platform to ask car-related questions [www.youcanic.com]. Feel free to dig into these resources and do reach out if you have more questions. We're thrilled to assist you on your automotive journey [www.youcanic.com/].

@akachukwujonathan4055 Год назад

Having this issue GL450 2009 model it hardly start after changing new main battery, now the vehicle can't start at all/rev....I have tried during calibration of ISM but it's saying calibration not completed........The gear only indicate P, and can't change to any other gear lever