Mercedes-Benz E Class

Подписаться 56

Просмотров 9 тыс.

50% 1

Was driving my Mercedes-Benz E Class Estate and noticed loss of power especially on higher gears despite flooring the accelerator. There was a check engine light and upon scanning the computer the scanner picked up Codes P2454 & P244A. Here is how I DIY fixed the issue by replacing the DPF Pressure Sensor and used the DPF Pressure Sensor hose to funnel a DPF cleaning solution to help clean the DPF as a good measure. Hope you enjoy the video.

Опубликовано:

13 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 5

@markcadman1516 Месяц назад

brill thanks - just what I need!

@nightstorm9128 2 месяца назад

You don't have to take the wiring loom off the computer,,,just leave it on,,If you unscrew the top of the air box off the whole lot including the loom computer and top of air box lifts and you can just flip it to one side,,

@EclestIXX 2 месяца назад

Yes that's easier, thanks for the comment 👍🏻

@nightstorm9128 2 месяца назад

Your better off just plugging the computer back in and run the car like that ,,You'll have no problem and the car will run just fine,,by putting everything back together before even running the cleaning fluid through the engine,,If you run into a problem your going to have to take everything back apart again,,Also after doing a cleaning of a blocked dpf you will have to recalibrate the emissions computer,,And tell the car it has a new dpf fitted,,The best YT channel to watch for all things dpf related ,,including this 2.2 mercy engine is O RIELLYS AUTO,,

@EclestIXX 2 месяца назад

Thanks for the advice. However, my car didn't have a blocked dpf, just needed a new dpf pressure sensor. I did dpf cleaning as an extra measure to aid in dpf regen since it has over 128k miles. So it didnt need recalibration. I took the car on a good long run both local and highway after the fix and the car runs smooth and no further issues.