Mercedes-Benz | Sequential / Dynamic Turn Signal 

You can skip first step that’s include to remove the mirror if you like, you can remove plastic cover anyway. Stressed out making this install did not do proper homework before. Not really necessary to remove the cable from the signal don’t know why I did that 🤣 Hope you like the video if not you can find more of this installs on other channels 👍

Thanks - was able to replace the indicator on a W246 B180 within 5 minutes - did not even need to remove the mirror. Just line up the mirror so it is parallel with the joint between the black main mirror assembly arm and the colour casing. You can then just pull the casing off upwards - leaving the mirror in place. Had to apply a bit of pressure using a trim removal tool on the front side of the assembly - i.e. below the clear indicator plastic - where the casing meets the black arm and the casing just lifted upward clean off.

My left Side mirror turn signal just broke today. And I directly to your channel if you has any video about this. And you do have it!! You are a lifesaver! I’m so glad you upload DIY video about w212 !! You saved me a lot of money my friend!! 😎✌🏻

I sold my w212 e250 a couple of years ago and bought a Golf GTE. Biggest automotive mistake I have ever made

thank you for taking the time to post this video, I appreciate it, hello from Miami, Florida, I own a 2014 E350

Wow, I'm surprised how good the new ones look 👌

Have the same one's with extra wire for blue turn signal just hooked it to puddle light. Nice install

I've put these on a month ago. The third wire was cut off, as yours. Works well.

Thanx for the clear video !!!!!!!!👌🏻

These are so clean . Had to get a set

I have tried 3 different versions of these, on 2 different Mercs - one from 2013, and the other from 2016. I also tried them with a bench rig, using an old school flasher can from the 90's, and all worked fine. On the Mercs, they all gave error messages about bulb failure. None of them lit all of the LED's in the strip (only about 80% of them at most). 2 of the 3 versions also caused the other bulbs to stop working - either the front, the rear, or both. I tried all sorts of series resistors, and other 'Canbus Fixes', but never got them working correctly. Anyone else have this problem and found a solution?

Great video!

Anyone know where you can get these for a CL203 CLC 2009

Good Video, detailed very good 👍

Ich brauche das für den W211 !! Wo gibt es das ??

These are so nice!!!

Ok, I'm trying to pop off the plastic black part like you did so seemingly easily. It's taken the strength of 1000 SUNS and It is still stuck. I don't want to break anything but I'm damn near ready to HULK pull on the thing. Anybody else having same issues with the big plastic piece he pops off after the mirror????

Wie immer ein super detaillirtes Video 👍weiter so 👍

Nice upgrade

Nice new look for your MB. Congratulations.

Is it the same way to remove the glass the glass if you have blind spot assist

Классно. Спасибо за обзор.

Those are nice, however, you should have went with the Dynamic Syquqential LED lights that Have LED WHITE, OR BLUE LED, when your unlock or lock your car, I just ordered a set off of DMP Design, they look Sick, way better than just blinking lights lol!!!! Something to think about, it helps if you have Puddle lights though.....

nice

Super!!! 👍👍👍👍👍

Ok, but how does it look like from the rear side, are they visible? This is the main purpose of these signals. Unfortunately you haven't shown this.

👍👍👍

Would have been a great opportunity to clean and polish the indicator / mirror casing. Pity.

Buy link for amazon amzn.to/34SodBc

Thanks again sir

I have a ‘16 E400, would this fit ? (sedan)

hii where is the link to aliexpress?

Just fitted same ones without removing the mirror it's easy

I want them it's how much

Mughe chaiye price

9

Super 🧐

Where did you get the turn signals at?

How to order online

super👌🏼

Where i can buy it?

👍👍👍