Mercedes Sprinter Injector Removal 

Did you know that its not necessary to wait until its all carbonized and stuck? 20 euro for bolts and seals. Do it every 2 years as routine maintenance. Avoid the problems and the terrible cleaning. 30 to 40 minutes is all it takes. Without the carbon build-up its super easy. No special pullers or magic needed.

To good to be true. In my carer had only couple of them going out that easily. CDI always is pain in the ear.

What’s the torque setting for the bolts to hold the injectors ?

Great video but it's never that easy to pull an injector out!

Very helpful, but that looks like a T-50. I'm assuming it's just a typo when it says T-15.

Thank you good video what a ba£&&@ they were to remove on my sprinter seized

Tried re-coding the injectors on a Mercedes Sprinter 2010 plate and the snap-on diagnostic tool was unable to do it is there a special piece of kit you need to code the injectors on this van as i have done other cars and vans with no problems at all

One question when installing the injectors, did the injector valve hit you?

Very nice video 🌹🌹🌹🌹

Why don t write in theme what injector Bosch, Denso, Delphi? Model Sprinter 906

Are 2013 sprinters fwd?

please talk in the video i dont want to read subtitles

Yeah, the injectors are not coming at that easy.... Using slide hammer and and have gotten 2 of the 4 out.

I shudder when I see shifters used on anything. Especially on critical engine parts. Otherwise nice work, got the job done.

Can we have more? Simple to follow. Clear and concise. No need trawling through waffling. Straight in there.

That was great, very clear and thorough. Well done.

This is the best video on sprinter maintenance I have seen. Thank you for your conciseness and clarity. Most others are too long, too boring and not well filmed. Thank you.

mate this is awesome great video and really well explained, getting those return leak off connectors released is what I was stuck on. Life Saver

Is it needed to replace the supply pipeline for a new one or can you reuse the old one? I’m thinking of doing it my self because the mechanics here don’t have time for the coming 2/3 weeks. I can order the injector, ring and bolt but can’t find the pipeline

If you need direction to take off the air intake, do not attempt this job. Do not use an adjustable wrench on any machine. what does god have to do with it?

u r avin a laugh mate. now is 2020 and my sprinter outside is 2006. none of the injectors want out. one injector clamp bolt snapped 15 thread turns down. Your trucks clearly newer.

Thanks from me too. Got a have a look ate injector #1... Hopefully I'll find another video with suggestions on hot to clean them. I here new injectors on the sprinter needs to be coded with the ECU.😨😱

All the important stuff is behind the hands so nothing can be seen!

fake

You are a perfect pig when using that type of tool to remove the diesel lene

Mine has the early stages of Black Death 2014 313, leaking around 3rd injector back from front grille, I will find out if seized this weekend ? Could well be as prob got hot and deposits etc?

Thanks , a lot

Use the correct size wrench

Hi' I have just had an engine fitted on my 313 sprinter. Mechanic has fitted new delphi injectors but wont start. Delphi say injectors have been scarred and are now knackered (won't replace them) have you or your followers experienced this , what could be the cause and do you know of a solution

Didn't worked. It was losing compression so it's full or carbon and sticky black goo

Hi, I replaced the common rail in my 2014 Sprinter. I bled the system etc the van just won't start. It's been sat now for the best part of a year. Any ideas?

great job. no chitty chatting just clear consise demo

That's the best video, no messing round. Thanks

Does the injector have a oring on it?

Would this kinda be the same on a vito?

Havasını nasıl alıyorsun

Play louder this junk music you become as Genius.