Mercedes Vito gear change issue 2nd and reverse very simple fix link below for new bush about an hour to fit start to finish www.ebay.co.uk/itm/Mercedes-W... Patreon: www.patreon.com/user?u=385438...
You are a real Hero. I've spent lots of money for these problems. Mechanics replaced lots of parts, never think about the Bush. I can't believe it, its a the simple solution.
Great video. As a side note to anyone reading this. I fixed my reverse issue by applying a lubricant spray to the area. There wasn’t much grease and the gears were a little stiff. I sprayed a multi purpose lub on and it seems to have worked.
Thanks for the video. Made the job quick (40mins?) and simple. In fact I found I didn't even need to fully remove the stick assembly. I didn't disconnect the second ball joint: managed to fit the new bush with that second joint still attached.
I have a left-hand drive Vito. We are driving on the right side of the road here in sweden and I wonder if this one fits my car or is it just for right hand drive? Its a Vito 639 and year model 2011.
You make this look so easy! My 2013 vito struggles to get into 2nd gear.. more so in the mornings.. crunching and hard to get in.. plus seems stiff in the movement.. Think Im going to attempt this. What sort of grease did you use to regrease it? Thanks
Very helpful vid, thanks :) Just about to order a kit to do mine. Out of noseyness, what sort of mileage had yours done when you did this repair? Mine is well up over 130k, and there's so much play in the stick that when it's in gear it wobbles side to side as much as it does in neutral!
@@MrMeltedwellies parts arrived today, sp that's my job for tomorrow morning. I'm hoping that tightening up the stick will also make the reverse lights come on without needing to hold the stick in just the right spot!
Just changed this bush now cant get second at all where as i had a very slight crunch before...could this be a new bush problem as it goes into everything but second, any ideas?
Bonjour j’ai aussi un vito 109 C.D.I. de 2008 j’ai un problème avec la deuxième vitesse qui craque vous pensez que la pièce que vous changer peut résoudre le problème merci d’avance Francesco
Can anyone tell me who had this problem and fixed it with this solution, whether when the bushing was bad, did it crunch into gear? Did this solve that? Thanks.