No video :(

MERCEDES W108 M130 VALVE ADJUSMENT AND CAM COVER CLEANING.

Подписаться 4,9 тыс.

Просмотров 5 тыс.

50% 1

Adjusting the valves on the M130 engine should be done every 12k miles. I'm a little past due at 15k. Along with this I took the opportunity to clean the cam cover. I was interrupted part way through due to a Fire in the area. Advice #1 Don't do this service if you need your car as a getaway vehicle:) This procedure is very similar to other engines. m127, m117, m116, m100. etc.

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@grantbellinger7403 8 месяцев назад

Love your work mate,these old girls must be saved,must be saved,just so people can enjoy the love that they create,beautiful,beautiful cars!

@mercedesmaintenance.6339 7 месяцев назад

Thank you so much. I'm currently starting the rebuild process and shooting video. It's taken a while but it's slowly coming together. I agree these are magnificent cars and deserve to be saved. Cheers John.

@juanbofillaba 2 года назад

Great job as always!!! Good to see that I am not “home alone”.

@mercedesmaintenance.6339 2 года назад

You're not alone Juan!!:) Cheers John 🍻

@breakingtoys3542 Год назад

Thank you so much for making such perfect video!!

@mercedesmaintenance.6339 Год назад

Thank you!! Glad it helped. All the best Cheers John 🍻

@morganjoe1 2 года назад

Thank you for posting this!!

@mercedesmaintenance.6339 2 года назад

Hope it helps Joe. Cheers John 🍻

@mrconstable1908 Год назад

I always either remove, or disconnect, the fuel pump relay when doing this type of work, so as to prevent gas accumulating in the cylinders when flicking the engine over.

@mercedesmaintenance.6339 Год назад

Good Idea!

@Mercmad Год назад

Hi!, we know all about fires here in Australia but we also have really big floods and I lost everything last march when 2 meters of water through my place. I left a reply over on my little channel about the blue spray. I'm also trying to track down a pair of M117 mount arms for a W108 .Part numbers are A116 223 1204 and A116 223 1304. cash waiting...ha ha.

@mercedesmaintenance.6339 Год назад

Hi Ron. I have 117 and transmission sitting in the shed. I'll check to see if I have the mount arms. The bloke who gave it to me pulled some parts off before he gave it to me. 🍻 Cheers John

@mercedesmaintenance.6339 Год назад

Hi Ron. I took a look today. Sorry no mount arms. The guy who gave it to me stripped some stuff off before. I do have some pistons, connecting rods and misc other stuff. Also heads etc. Cams have some surface rust but could be possibly saved. Cheers John 🍻

@Peter-gi3re 2 года назад

Would like to have heard the engine running when you finished …….. can you hear a difference when you have finished? I remember my dad teaching me how to do this in the late 70’s on a Peugeot 304 1.6 diesel …… it used shims to adjust the clearance. It was a tricky little job to do. We had the misfortune of dropping a small bolt down into the engine and spent a whole night stripping down the front of the engine to retrieve the bolt 😀

@mercedesmaintenance.6339 2 года назад

Good idea Peter!! I have a friends w113 that we're going to do next, I'll do what you suggest. He's not had them done for a long time. Cheers John 🍻

@youngtimersgarage 2 года назад

nice work!

@mercedesmaintenance.6339 2 года назад

Thanks Mark. Cheers 🍻

@geofffikar3417 2 года назад

Glad everything is OK. You all must be rattled by those fires.

@mercedesmaintenance.6339 2 года назад

Thanks Geoff. Getting use to it now, same thing every year. Cheers John 🍻

@iLoveNapalm Год назад

this might not be the perfect place to ask and i did comment on your older video but how did you remove the whole wooden dash stretching from the driver side all the way to the glove compartment? thanks

@mercedesmaintenance.6339 Год назад

No problem. It is a lot of work to get the dash wood out. Firstly gauge cluster has to come out, then heater controls, radio, vents, misc switches and the Ac unit lowered to get to screws on the lower edge. Its something I will be doing again in the future as the 6.3 dash needs refinishing. I will shoot a video of that. Stay tuned:) All the best Cheers John.

@iLoveNapalm Год назад

@@mercedesmaintenance.6339 thank you very much

@panKyrr Год назад

Hello..i 'm mercedes w108 SE280 (M130 emgine) owner and im searching for fuel pump ( i cant find the original one)..do you know where could i found?

@mercedesmaintenance.6339 Год назад

I know a rebuild kit is available. That maybe the way to go Here's a link. www.authenticclassics.com/Fuel-Pump-Seal-Hardware-Kit-late-Mercedes-280SL-p/auth-006328.htm Come join us on Mercedes Maintenance on facebook and ask there. Someone may have one. Cheers John

@mercedesmaintenance.6339 Год назад

Also keep an eye out on ebay. They do come up from time to time.

@christophermarshall5765 2 года назад

I did them in firing order. Easy method.

@mercedesmaintenance.6339 2 года назад

What happened the other day? I value your input Chris. Cheers John 🍻

@christophermarshall5765 2 года назад

@@mercedesmaintenance.6339 others in the group decided they know more than I do, yet they are not involved in the industry anymore than just changing oil. I got fed up with the nonsense, so I left the group. I have better things to do with my time than argue with them.

@christophermarshall5765 2 года назад

@Ken's Show & Tell I'll share my extensive knowledge when others are prepared to shut up & learn. Until this happens, I'll remain silent.