Тёмный

Mercruiser Impeller Changeout 

Adventures of Happy Ours
Подписаться 28 тыс.
Просмотров 31 тыс.
50% 1

Changing the impeller on my 2006 Mercruiser 6.2 MX Horizon. This is the standard motor on many mid size cruisers like my 341 Meridian sport bridge.
This raw water pump is difficult to get to sandwiched under the motor and behind the cool fuel module. We can either disconnect all the hoses and pull the entire pump or keep in place and just pull the pump cover to access the impeller. I opted for the latter due to difficulty reaching the pump hoses and drain lines for the air purge system.
I’m using the Quicksilver water pump repair kit amzn.to/39DKc44. Use this link to order and help out the channel!

Опубликовано:

 

6 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 29   
@otiebars32
@otiebars32 Год назад
It's always great to have someone take their time and make these types of videos to help other people out.
@Keith-v8q
@Keith-v8q Год назад
Funny how you kept saying "not alot of room". The amount of space you have is a wet dream compared to my wakeboard boat vdrive. Anyhow thanks for taking time to make/post.
@AdventuresofHappyOurs
@AdventuresofHappyOurs Год назад
Yes it’s all relative. Lol. As I get older it gets tighter. Lol
@SharonWhite-z4n
@SharonWhite-z4n 6 месяцев назад
Just about to start work on my Maxum 2700, your video was very helpful...Thank you
@chrisgolden2698
@chrisgolden2698 Год назад
That was extremely helpful changing the impeller on my remanufactured 383. Thank you!
@stevebell2999
@stevebell2999 Год назад
Excellent advice and demonstration. I have exact same engines on my ‘04 Carver.
@ronaldhidde7119
@ronaldhidde7119 5 месяцев назад
Feel lucky you don't have "V" drives and have to remove exhaust. A total PITA!!!
@brettgerber795
@brettgerber795 Год назад
Great video. I didn’t know the impeller direction can change (at least on some models right). I have always used 2 zip ties to compress the vanes of the impeller to slide it in the pump similar to using a ring compressor when installing a pistons into a cylinder.
@AdventuresofHappyOurs
@AdventuresofHappyOurs Год назад
I’ve tried that too. I always tried to put in the correct direction but at least this model self corrects.
@mchaves7663
@mchaves7663 Год назад
This is by far the best video on this subject. Thanks very much for that
@OutOnTheReef
@OutOnTheReef 2 года назад
Wow cap. That impeller is in a tight spot 😳
@dalebaker3206
@dalebaker3206 Месяц назад
Thank you.
@1951RKP
@1951RKP Год назад
I watched a video where a guy tapped out the part of the pump with the hose barbs so he could put the small housing bolts in from the front side rather than having to reach under to the back side. I’ve changed hundreds of Bravo style pumps old style and the new style like this one and they are always a pain to do. I’ve got to do a 2006 Meridian 411 with 8.1 in the next few weeks.
@AdventuresofHappyOurs
@AdventuresofHappyOurs Год назад
Plan B was to tap them out. Using the original setup with new hoses was easy enough and didn’t leak so I’m going that route for port engine next week.
@mchaves7663
@mchaves7663 Год назад
Would you post a link to this video please?
@sharronhumphries6727
@sharronhumphries6727 Год назад
Thank you for sharing !!!.
@dougmckenzie4589
@dougmckenzie4589 9 месяцев назад
Thanks mate!! Great explanation!! 👍👍
@MrInfiniti2008
@MrInfiniti2008 Месяц назад
Great 👍 video. Thanks for sharing it. Subscribed!😊
@AdventuresofHappyOurs
@AdventuresofHappyOurs Месяц назад
Welcome aboard!
@Sailing.Artemis
@Sailing.Artemis 2 года назад
good job, and a very goo how to
@stephenj8576
@stephenj8576 Год назад
Nice vid, starting to get to know the channel
@AdventuresofHappyOurs
@AdventuresofHappyOurs Год назад
Welcome aboard!
@steveede1823
@steveede1823 11 месяцев назад
Just curious what are your water psi cruising? Im getting 11 on one engine and 20 on the other at 3700rpm. Thinking i should do the impellers. Temps stay at 160. Same engines and year as you. New to me boat this year. Great video!
@AdventuresofHappyOurs
@AdventuresofHappyOurs 11 месяцев назад
Not sure what they read at speed but they are similiar.
@drizler
@drizler 3 месяца назад
How long do these impellers last generally. I just gor a bravo 3 and am only familiar with the Alphaand its quirky pump.
@AdventuresofHappyOurs
@AdventuresofHappyOurs 3 месяца назад
3 years is a good changeout schedule. Or 300 hours. Whichever comes first. You then should never have a problem from my experience.
@slosher42
@slosher42 Год назад
if you would have taken the hose off the back housing and pulled it out it would have been a lot easier.
@AdventuresofHappyOurs
@AdventuresofHappyOurs Год назад
I’ve done it both ways. Both suck. Lol.
@MaxOpticalDowningtown
@MaxOpticalDowningtown 4 месяца назад
He was another video doing it the other way, I just did mine and it is a PITA.
Далее
Cabin Cruiser wrenching! Bravo 3 impeller change!
15:13
ПЛАН ПРОТИВОДЕЙСТВИЯ МЕДВЕДЮ.
00:28
I Did This With Coffee! 🤯☕️ #shorts
00:22
Просмотров 272 тыс.
Overheating problem - Flushing Heat Exchanger
10:37
Просмотров 18 тыс.
Mercruiser Impeller Replacement / Alpha One Impeller
8:51
Raw Water Impeller R&R
11:45
Просмотров 176 тыс.
Mercruiser Raw Water Pump Impeller Replacement Tricks
15:36
IMPELLER - Everything you should know
15:06
Просмотров 18 тыс.
Mercruiser 5.7 exhaust riser inspection
6:21
Просмотров 215 тыс.
Mercruiser 350 MPI Seawater Pump Impeller Replacement
18:48