No video :(

Mesa/Boogie Studio .22+ (Part 3)

Подписаться 8 тыс.

Просмотров 4,2 тыс.

50% 1

Replacement nylon standoffs: www.cedist.com...
Webpage: www.bradsguitargarage.com.au
Facebook: bradsguitargarage
Instagram: / bradsguitargarage
Equipment:
Soldering:
Pace MBT station w/SX100 & PS-90 handpieces
Hakko 474 w/815 handpiece
Hakko 936 w/907 handpiece
Hakko FX-888D w/FX-8801 handpiece
Quick 861DW hot air station
BOFA fume extraction unit
Loctite Multicore solder (C511 / 362)
Test Equipment:
Fluke 11, 175, 177 & 179 handheld DMM's
Tektronix 2236 analog oscilloscope
Rigol DS-1054z digital oscilloscope
BK Precision 4017A sweep / function generator
BWD 160a function generator
HP 6236B triple output DC power supply
Kyoritsu 3132A insulation / continuity tester
Video equipment:
Overhead cam: Panasonic HC-V785 w/Audio Technica AT9946CM mic
Handheld cam: Panasonic DC-G85 w/Olympus M.Zuiko Pro 12-40mm f/2.8
On location cam: Panasonic DC-GH5s w/Panasonic-Leica 9mm f/1.7 & 12-60mm f/2.8
Capture card(s): Magewell HDMI USB, ATEN UC3020-AT, ATEN UC3021
Headset Mic: Audio Technica BP892xcW-TH
Lapel Mic: Rode Go
Editing: Adobe Premiere Elements
Hand Tools:
Wiha, Felo, Stanley screwdrivers
CK & Engineer cutters / pliers
RS Pro wire strippers
Sidchrome & Gear Wrench spanners, sockets & shifters
Veritas planes & chisels
Materials / Consumables:
JJ's / TAD electron valves
Elixir / Ernie Ball / D'Addario / Rotosound strings
Electrolube & DeoxIT cleaners, lubricants & chemicals.

Опубликовано:

8 ноя 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@vl292 8 месяцев назад

Soundwise these are gems. Sound fairly similar to mark amps of that era, but dont need to be loud to sound good. Great practice amp for your livingroom.

@mistermac56 9 месяцев назад

This monster was manufactured when there were more brands of decent quality and decent priced EL84 valves available. You did a great job in your repairs to tame the beast.

@theblacksquirrel. 9 месяцев назад

The Inspector Gadget theme was worth the price of admission alone. As I understand it, those things were used a lot for lead work in studios (rather than general workhorse).

@bambule5268 9 месяцев назад

Against all the odds you made this thing sound great. Nice one!

@fiddlix 9 месяцев назад

Another Ill designed amplifier from “The Spirit in Art in Technology”…way to go Mesa..!

@ForeverDownByLaw 9 месяцев назад

I had one of these for my first "good" tube amp. I liked it at the time, although it really was more suited to higher gain than I desired. A decent drive sound, a very good clean sound as I recall, overall a bit boxy. Ate tubes every 6 months like clockwork, and that's when USA Sylvanias were available from Mesa at a reasonable price.

@BradsGuitarGarage 9 месяцев назад

I'd say all of that about this unit. I do maintain several amps that run over 400v on the plates of EL84's and they seem to be stable over the long term providing the plate and in particular, the screen dissipation is kept in check.

@75YBA 9 месяцев назад

Mesa/Boogie never ceases to confuse me.

@Claude77 9 месяцев назад

Add a small transformer 240 to 50volt to take down the voltage by 50 volt or whatever you find suitable..

@tedmich 9 месяцев назад

a MOSFET /zener B+dropper might help here...I have several Peavey Bravos, and they feed their el84s 420V ;) In the end you got the little Messa sounding pretty good!

@BradsGuitarGarage 9 месяцев назад

MOSFET would be the better option, but mounting it in this amp would present several challenges. I really shouldn't need to redesign every Mesa that comes in, but here we are, I guess. LOL!

@tedmich 9 месяцев назад

@@BradsGuitarGarage with great brains comes great responsibility..if you let it ;)

@Mark70609 9 месяцев назад

The Zener diode is an easy way to reduce B+ it’s just a matter of getting the right zener (voltage and power ratings). Brad, why do you like a MOSFET, I opt for a circuit with minimal components where I can. Less to go wrong.

@RonanCantwell 9 месяцев назад

Always interesting to see your work, Sir. I've got the "boogie" badged .22 (not the +) that's had a few tweaks and it sounds pretty decent. It's long overdue having its nappy changed though so I might give that a shot, having seen these videos.

@Ireland831 9 месяцев назад

I have owned Studio .22 and .22 +. I have modded the .22 to have the Lead Master and Lead Gain, etc. I changed some fixed resistors to control the gain and volume for the gain channel vs cutting traces and putting in pots. I found that a speaker change was a must. I had great success with the Eminence Wizard in this amp. Great vid series, Brad!!

@BradsGuitarGarage 9 месяцев назад

Good work, mate! I'd love to do a deep dive on modding these things, but I just have nowhere near enough spare time to do so.

@sempercompellis 9 месяцев назад

you make me realize how much i still don't know..... I love your way of dialing in an amp! you got my sub!

@richardleerodgers5303 9 месяцев назад

Great work you are an outstanding craftsmen

@RobbieF 9 месяцев назад

Thanks Brad.

@jazzcat123 9 месяцев назад

High quality content, Niche, but well made. A+

@onesandzeros 9 месяцев назад

Thanks Brad, interesting videos. I remember Guitologist had an EL-84 Mesa on his channel, a DC-3. He had trouble with the bias circuit iirc.

@TheBoomtown4 9 месяцев назад

So then the guitologist has mesa biasing, legal and mental problems. Guy’s a nutter.

@joepeezy4sheezy 7 месяцев назад

@@TheBoomtown4I used to love his channel, then it somehow went in strange places. When his wife left and everything was everyone else’s fault, I had to bounce. I went back recently to see if he’d gotten better, but sadly not. A nutter indeed.

@colintierney9715 9 месяцев назад

Love the little “Hall of the mountain king” riff for the true champions.

@erajad 9 месяцев назад

Super trilogy - and three parts isn't too many for me! :) (Then again, I'm not one of the cool kids.) My son's pal has a DC-3 that eats tubes and not so long ago almost went up in flames. Poor guy has had it "repaired" multiple times ... if only he could get a fix as good as this one!

@BradsGuitarGarage 9 месяцев назад

Sounds like it may be too far gone for repair if it went up in flames. Believe me, mate, I am very sorry to hear that and I wish I could help out. Let me know where you are via www.bradsguitargarage.com.au/form/contact-us/ And I'll check if there's someone nearby we can trust.

@TheBoomtown4 9 месяцев назад

13:40 really dialed in a nice tone here. Great vid and demo after.

@gamjammallota78 9 месяцев назад

So far from the original "Boogie" that Santana had it's a crime.

@baabaabaa-yp2jh 9 месяцев назад

Wasn't that a rebadged Princeton with the guts swapped out? It was def Carlos saying this little amp can really boogie! By def...l mean guitar mag folklore!

@DrKevGuitar 9 месяцев назад

Seems like you rebiased a win. Increased the voltages barely 5% and got a 30-40% drops in idle dissipation. Straight to the pool room there mate!

@darrylgodfrey9604 9 месяцев назад

Another great video, Brad. Could you not reduce the B+ using the "power Zener" (i.e. MOSFET + Zener) method? That approach should leave the heater voltage alone.

@Mark70609 9 месяцев назад

I don’t know why Brad didn’t use the zener diode to reduce voltage. Very easy and effective.

@johnbriggs3916 9 месяцев назад

Everyone else has been too polite, but I really think that Brad should be called on the outrageous visual pun in the thumbnail 😉

@PedalScience 9 месяцев назад

Farking good video once again chief. Thank You

@oldasrocks9121 2 месяца назад

Why not power scaling for the plates and screens? Split the B+, power section side hits the variable mofset, preamp side flies past it. VHT does this in a hamfisted way to get "bedroom" volumes, way simpler than the London way tho.

@wizardx4187 9 месяцев назад

thanks for the link for standoffs

@paulwatson8809 9 месяцев назад

El84 is the battered housewife of valves...

@shckltnebay 9 месяцев назад

I had a bias pot on a 1964 Twin Reverb with the same problem, was a pain to figure why the bias keep jumping around.

@tomoshea5683 9 месяцев назад

Thanks, dude!

@georgebush8038 9 месяцев назад

"sprayin the loob around like a drunkin sailor "

@siriusamplification 9 месяцев назад

those pots are the worst... usually the clip inside the pot snap right off. I resurrected on by dissecting the pot in front of him and found it was glued together before that

@kbirridia 9 месяцев назад

You must have a good backlog if your bias notes were done on June 11th. (lol, dumb joke) Thx for the great work.

@nigelhicks6457 9 месяцев назад

I seem to recall somewhere Kurt Cobain used these in his live rig feeding a power amp. Can anyone recall?

@murrayguitarpickups9545 9 месяцев назад

First "mod" I would do is blutak on the 750hz slider so it can't go above halfway😂

@BradsGuitarGarage 9 месяцев назад

HAHA! Yes. Lock and tag that bugger out!

@goodun2974 9 месяцев назад

Is the Standby switch circuit as poorly designed as everything else, perhaps overvoltaging the filter caps or causing the switch to fail prematurely?

@luizdejesus6240 9 месяцев назад

Could you drop the plate voltage by adding a dropping resistor between the B+ and the center tap of the output transformer. I have never tried it but was wondering if it is even possible.

@pwlebrun4573 9 месяцев назад

Well we found out what Mesas are good for: Grieg’s Peer Gynt. 😄

@weschilton 9 месяцев назад

A Mexican standoff calls for a Mexican beer and a plate of nachos.

@johnwilliamson467 9 месяцев назад

load the power supply with a resistor in series after the first cap . Even a small resistor before the first cap and a small cap before that resistor. My thoughts.

@BradsGuitarGarage 9 месяцев назад

That would need to be a chassis mounted power resistor, I think we'll be fine in the case.

@sarcophagist4097 9 месяцев назад

@@BradsGuitarGarage You just answered the question I was about to ask (whether a high wattage chassis mounted power resistor would have been a suitable option).

@riley0187 9 месяцев назад

zeners are your best friend dropping b+

@antonix_81 9 месяцев назад

would a voltage regulator on screen supply a good solution to prevent destruction on el84s? let say bringing down voltage to 250 volts...

@BradsGuitarGarage 9 месяцев назад

That can work, but the easier way to do it is with Zeners on the screen supply. This will affect plate dissipation also.

@antonix_81 9 месяцев назад

@@BradsGuitarGarage Cheers Brad 👍🏻

@Lu_Woods 9 месяцев назад

It looks a lot like my '76 Mk1.... no vactrols yet I guess. ; )

@Chelliamplification 9 месяцев назад

How many hours did you have into that repair, or should I say days?

@BradsGuitarGarage 9 месяцев назад

Nothing too dramatic, coupla hours.

@krauz111 9 месяцев назад

That amp is worth the repair only because Kurt Cobain used it hehee grreat job

@James-Customs 9 месяцев назад

Any thoughts of trying a high wattage sag resistor to drop the B+, to run the tubes at lower B+.

@James-Customs 9 месяцев назад

Just saw someone else floated the idea already.

@BradsGuitarGarage 9 месяцев назад

That could work, but would totally change the response of the amp, I think we'll get away with it on this one from past experience.

@goodun2974 9 месяцев назад

@@BradsGuitarGarage, maybe a heavt duty zener diode to drop the voltage a bit?

@BradsGuitarGarage 9 месяцев назад

That would dissipate a lot of power. A MOSFET would be a better option, but mounting it would be another challenge that this amp design doesn't lend itself to.