Metal Morphing! | Stretching Out Dents! 

My father was a fender body man for 50 years. I wish he were alive to see this kind of work! I seen him work magic on the older heavy metal panels of the older cars and trucks. Fix holes, stretch and shrink metal, anvils, pick hammers, flat head hammers he had em all. All his tools are safely stored but I have no idea what to do with them almost nobody does hammer nobody work with the new thin high strength memory steel used these days. To be honest it's almost unbelievable to see you do this kind of work! Extremely well done video and great content!

I have been doing auto body/collision repair for forty years and never would have believe this had I not watched it with my own two eyes,that was amazing to say the least,I subscribed

If I didn't see it I would never believe that was salvageable. Incredible work!

It's refreshing to watch a quality bodyman make a repair--AND--without needing paint !! YOU, sir , know your craft !

Sir you are a metal genius we need more professionals like you

I do have to say myself the man if steel is more of a wizard of metal. I'm 56 years old and been doing body and paint work since I was 13 years old, specializing in restorations and customs. I used to think I was above average at working metal until I watched him in action and by far I believe he's the best I've seen.

This the first time I’ve seen a full video like this and super impressed. Really helped out a lot.

PDR Training Message Me Here! www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/

Seriously man, at this point, it’s beyond skills or art, it’s either magic or alchemy.

The man of steeeeeeelll. You’re a legend! Incredible content and the passion you put into your videos is incomparable! I’m subscribing in hopes to be a fraction as good as you are in dent repair.

Even after all these years it's still satisfying watching them pop out lol

You're an artist, bro. If this is 90% you have a lot of pride in your work.

WoW! I didn't think that was possible to come out so clean. There were so many potentially nasty areas - tight creases being the worst. Well done - magic AND alchemy! Greetings from an autumnal Britain.🙂

I was having a crap day until I got notification of the MAN OF STEEL had posted :) You made my day cheers Superman

30 years + body shop owner. I am impressed! Liked and Subscribed!

I finally did PDR for the first time. I can’t believe how much it works. I use to work at a Corvette body shop for years. We always replaced stuff or broke out the hammer and dollies to straighten metal then the stud gun and on to bondo and europrime and guide coat and into the booth it went. My kids car was blasted by a lady that ran a stop sign making a left into his drivers side front tire. I spent the weekend replacing suspension parts and using epoxy to fix the headlight. I decided to give PDR a try after seeing your videos and buying the tools from Amazon. I have to say I was shocked at what I was able to do with no paint work. You can’t even tell it was hit. I spent about 30 minutes with my buffer and some pads with superduty and finishing compound. It’s like it was never touched. I just wanted to say thanks for the videos. I learned enough watching you to do this on my own and the results were amazing. My kid still thinks I replaced the fender and bumper. That says something about the information I picked up from your videos.

New to the channel and about a year and a half into body work. You sir are already making my life easier. Killer skills.

Dude that was awesome thanks! This cuts down on repair costs ! Your on a gold mine with that ! Totally amazed 😲👏

This is an amazing talent that few people have, much respect.

It's amazing how easy, a competent/skilled worker makes this look. Very nicely done

Seriously this was a piece of work that was not near but beyond perfection without any teardown. I wish I could learn this art technique from you.

New subscriber and I have to thank you immensely for your videos because they have taught me so much! I'm used to working under the hood, so body work has been a who new ball game for me, but your videos have been great and saved me a ton of money

Good to know still some people are this talented, patient, and not just a replacer of any damn thing!

You earned a new subscriber. Amazing repair work. Watched you fix a quarter panel on one right before this I basically laughed when you said it could be done. Being in the collision repair trade for most of my working life I didn’t think it possible without paint cracks or super stretched metal. It was immaculate when you got finished up, figure this fender you could do with eyes closed. Thank you for sharing your talents with us!

Great video. I'm normally an engine guy, but this video was really interesting. Wish you would have shown your hammer in focus. I would like to have seen the end of it a little better.

Wow, I never new that the dent repair has arrived on this level. Thanks for sharing your ways. Not that I will ever do this kind of thing, but I subscribe anyways. :)

Insane SKILLS!!!!! You are as much a wizard as a tech. I have done body work 35 years and I can't pick and file bare steel as good as you repair a painted surface.

Glad I found your channel. I appreciate the metal work. Anyone can slap mud on a dent but this is amazing.

Based off how long that tape has dried on the bumper, he hasn’t seen his friends and family in a long time anyways hahah. Great job as always!!

New sub here. I’m not sure how I found this channel but your work is next level. I’ve done a little dent removal in my time but nothing like this. You are the Man of Steel. Just wondering how much the typical dent removal cost?

New subscriber. It's awsome how much pride you take in your work that you've turned dent pulling into an craft instead of taking short cuts or RnR the area and charging an arm and a leg.

New subscriber, as a cold rolling mill operator ive got a great respect for how you morph and manipulate this magic material!

😁I love that :"it's too easy to replace the Fender"💪

I was looking on RU-vid how to remove my dent myself. A friend of mine had backed into my side door panel. I happen to stumble upon your channel. You're a magician! It's an artform I can get behind! I love stuff like this. 👍 New subscriber.

This mans a bloody miracle magician..This was incredible watching.Thankyou.

The man of steel does it again

It's unbelievable 😲 Great work your a artist of metal I will try this on my car thanks

If I had a fraction of this knowledge in how to heat, shape, and manipulate metal, I would never have to worry about where I park to avoid door dings. This level is only achieved after years of hard work. New sub here.

AMAZING WORK, MAN OF STEEL DELIVERS WITH CONFIDENCE!

Had to subscribe! Ive watched alot of PDR techniques but none with the degree of talent you have. Thank you for sharing your knowledge in a time when most keep their secrets to themselbes. You are a talented and kind person. Thanks

Just found this channel. Love it. Subscribed instantly because, yes, not every panel needs to be just discarded and replaced. Awesome channel

First timer here. Awesome job! It's nice when you're working with the right tools.

Just came across your channel. I'm a car mechanic. Just know enough of bodywork to know how difficult it is, and that I'm not good at it. We take our cars to bodyshops. None of them came out as clean as your results. Very very good!

You're a genuine Metal Morphing Power Ranger; AWESOME! I am truly in awe of your work.

Your not only a paintless dent repair guy, but your also a poet with explaining how it's done.

amazing skills , God bless you !

I do like your channel and your attitude! I never realized how hard is to do body work and how artist you should be to be able to pull that off! RESPECT FOR YOU! Subscribed!

what a job !!! respect for curves, angles ... and without damaging the paint !! great job and congratulations to the "artist"

Amazing how far the industry has advanced from drilling holes, screw-in slide hammers, and Bondo. You've obviously done collision work along with pdr. Combination of great stuff

His non-flawless repair work is so excellent that I think I would NOT do the flawless repair at all! I am truly amazed.

Hey man this is John I came into your shop today with my jeep. Thank you for your advice. I’m now a new subscriber! Can’t wait to see more videos!

Masterful ! Also, I can't be the only one watching the end like ASMR. So satisfying to watch all those dents being straightened.

You're a sculptor, artist, and a magician.

Amazing I recently got a small dent in a parking lot. It was from an older man, and I just couldn't make a fuss. I'm going to try this, it looks like such fun! Thanks so much for the encouraging video, again just amazing! Dan S.

Fantastic work

Thanks for your sharing knowledge!

This dude knows his craft. Cheers!

Thank you. From BC🇨🇦.

You’re one hell of a an artist that’s an excellent job!!!

That was impressive af. Anyone can paint a replace a NEW fender. This right here ... that’s TALENT !!

I have been a professional locksmith for over 25 years and like you, having the passion and dedication and the ability that set's us apart from the others in our respective trades although very different is the ability to think outside the box and approach and accomplish jobs that others have either given up on or just afraid of taking on in the first place! I'm 7 years away from retirement and have practiced pdr on all of my families vehicles for the last 5 years and love it enough to hopefully get into pdr full-time when I retire if my body permits me to, ( I've had several back surgeries and joint replacements that your videos have been so inspirational to me to not give up) you are the perfect example of true persistence and incredible ability! Please keep making the best videos on RU-vid, thanks! P.S. I would love to visit you with my son one day for him to see a true pro in person! Keep up the great work.

I just tried something like this on my work truck fender. Ended up caving and paving. I don't know how you guys do that. Nice work.

This is really something sir, my daughter's first car she paid for on her own got backed in to. Now she's on honor student at a high level college getting her masters, holding a job making her way. Unfortunately, just a week prior to her being hit I canceled the collision insurance, so dad is really trying to come to the rescue. I am a.single dad of 7 kids git one through college and 2 in college so ends are becoming tough to meet. She's driving a 2012 passat and really loves it, so looking at some of your videos I am using some of your techniques. This works amazing!! I am half way through and want to invest wisely in some tools. Any insights or direction you can offer would be more than appreciated. Thank you so much for the help you have given already. It's very much appreciated.

I have to say your the best there is bro. I have seen many people do this. But you got this down bro. Hands down man.

Yet another epic dent pull! Your approach to dents like this is very well thought out and you make it look effortless bud!! Awesome to watch!!!

Mad skills. Great work

This is the best PDR video ever seen on earth. Excellent subscribed.

New subscriber -- I've watched several of your videos and you are a master magician with PDR tools!

Absolutely amazing, this is the bodyshop of the future, had a PDR man I use save the roof of my classic car after a car bonnet fell on it which was tied to the garage roof, he did an awesome job, I buffed up the roof and it's perfect, but this is another level

just amazing. a real craftsman

Magician at work! Great job!

The man of steel Is amazing ! One of the best ! Honestly

Amazing skills. A true metal surgeon.

Wow, awesome work. Thanks for sharing your skills 👍🏻 ❤

You never cease to amaze me!

Dent magic, thanks for showing us your skills, I’ll be sure to remember these techniques.

new sub here. loving the content man of steel. I'm just getting into body work myself and you sharing your knowledge with us is appreciated. thank you

Brilliant, your an artist.

This stuff amazes me. That is masterful work.

always the best. from algeria. respect man

You sir are the champ with great skill and the oratory power to go with it. Salute.

Absolutely nice work! Great man. Regards

you are brilliant man 👍🏻, I shall call you "the man of the dents art work", keep up the good work

Amaging work ! Very satisfying to watch your videos

Very helpful and explained techniques !!

New subscriber! Just purchased a car for a deep discount because there was some ‘serious’ damage to the body. The right rear quarter panel has a huge dent. The right front fender and hood are pretty mangled. The right lower door frame is slightly accordioned. Gonna spend the winter slowly working on all those dents. I can’t wait to see the reaction from the previous owner next summer. He honestly thought it was too much work and too expensive to even bother. You’re videos will help get me there! Thank you for what you do and providing us with a view of it and explaining it all! Thankfully the frame was not harmed.

He will never be back. I've heard the "do the best you can" line a million times

This guy is a professional!

I realy love this chanel,thanks man of steel

Artistry, Beautifully done!

Truly amazing mate! How long did it actually took you to finish this job?

Crazy cool just can't believe the great work you do

impressive work and proper procedures were followed and making a successful repair.

My hat off fella. You have some serious talent mind blowing

That’s awesome , I would like to see more of this type of video.

Wow that was truly awesome. You are a true craftsman. What a skill you have developed.

Superb work! Awesome technique!

the final touches were terrific

YO YOU REALLY ARE AN INSANE CRAFTSMAN AND AN EVEN GREATER INFLUENCE TO THE YOUTH TODAY. I SALUTE YOU SIR.

Good job my friend, from San Francisco California I am first timer you’re a positive man I like that! Thank you I will keep watching your videos!