No video :(

Metal Shaping. How-To Use Cheap Tools To Build A Complicated Patch Panel.

Carter Auto Restyling

Подписаться 49 тыс.

Просмотров 201 тыс.

50% 1

Видео Поделиться Скачать Добавить в

Hello! Today we are back on the 1936 Chevy Truck. In this video I am building a patch panel for the fender, so I'll be covering the entire process from start to finish. We will begin by making a pattern, then move into shaping the metal using a variety of home made and cheap tools that are readily available to the average hobbyist.
If you found this video useful and would like to help support the channel, please check us out on Patreon.
/ carterautorestyling
Or you can send a donation via Paypal www.paypal.com...
#Carterautorestyling #classictrucks #1936Chevy #restomod #migwelding #restoration #customcars #hotrods #classiccars #cars #fabrication #metalworking #automobilererpairshops #bodywork #autobody #autobodyrepair #rustrepair #car #classiccars #hotrod #behindthescenes #sheetmetal #custom #metalshaping #fabricating #classiccar #metalfabricator #metalfab #trucks #gmc #stovebolt #restorevsrepair #restored #restore #barnfinds #rebuild #dentrepair #englishwheel #beadroller #tuckingfork

Опубликовано:

27 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 548

@pjsratrods8936 Год назад

Please show it all. I'm learning quite a bit by watching

@hermanschiller2035 Год назад

As a kid, all I ever wanted to be was an Auto Body Fender man, but, NO, I just had to go to college instead. So, after EIGHT years in college, I got a master's degree in Russian language and entered the Army as an Intelligence Officer. I got stuck there for twenty five years and finally retired. I'm now 65 years old, fully retired and NOW, I wanna' be an Auto Body Fender man!!!! Your video is incredible and I am determined to buy a hammer and dolly set and an English Wheel and start smashing my fingers. Thanks so much for your incredible video!

@johnholloway2445 Год назад

you are a true craftsman who learned through trial an error over the years well done,in a league all your own.

@roomwithapointofview Год назад

Magical, how a flat piece of metal turns into a curved piece of art. Bravo.

@CarterAutoRestyling Год назад

Thank you!

@MultiHotrod74 Год назад

I never thought I'd be entertained by bodywork. You, sir, are a true craftsman.

@CarterAutoRestyling Год назад

Glad you enjoyed it!

@daxtonbrown Год назад

The two paper templates to determine stretching is invaluable. Thanks.

@CarterAutoRestyling Год назад

Thanks, it definitely makes the repairs go easier

@OddJobFix Год назад

I've done it with layers of masking tape but this part is excellent no matter how he got there. The 'imposter' thing has to be most frustrating. What next?

@JH-vf8rm Год назад

Every time I start to gain confidence with my fabricating abilities I watch a video like this and realize how unskilled I truly am lol. Thank you for showing us how a true craftsman works!

@ExSheriffFattyBoySkinnyArms Год назад

The quality of the knowledge that this craftsman dispenses is invaluable. Hope everyone who watches this channel realises this. Thank you so very much Mr Carter for sharing your trade secrets with the world. It is very much appreciated!

@CarterAutoRestyling Год назад

That's very kind of you to say! Thanks so much for watching!

@Squintanditsmint Год назад

A bit late to the party on this one but I just wanted to thank you. The 2 templates to determine your approach is genius. As is reading the overlaps in the paper. Never seen it explained so well. Cheers, enlightened.

@mikewatson4967 Год назад

Never would have thought about the fact that shaping from one side or the others would make a difference. Your explanation was both eye opening and concise.

@RaysLaughsAndLyrics Год назад

Non-Lithium drill.. The mark of a true rebel. Kudos on the Cut an' Tuck panel patterns.

@CarterAutoRestyling Год назад

Someone's got to push back against the tyranny of lithium drills

@aldopine Год назад

Only have ever had RU-vid to find what I like to watch. I have no need for other types of social media. 👍🙂

@CarterAutoRestyling Год назад

Right on, thanks for watching!

@billnlori3149 Год назад

Ha ha, the Log Driver's Waltz is a classic!! I loved the explanation of "how long does it take", well said. Very cool how well that tucking fork works, simple and effective.

@iambicpentameter7177 Год назад

Oscar Wilde said “Imitation is the sincerest form of flattery", you are the best traditional bodyman on YT by far, so forget the Facebook guys even exist.

@stevesimons6333 Год назад

You bet all information is appreciated. Everyone does things differently so seeing a different process is a good thing.

@stevesmoneypit6137 Год назад

We want to see everything! Can’t get enough of your talent.

@TheEcono61 Год назад

Never too far gone, I've watched you do it.

@CarterAutoRestyling Год назад

Never say never. Haha!

@corneliusthegreat6794 Год назад

Love seeing people restore old cars

@CarterAutoRestyling Год назад

Thanks for watching!

@mattv4690 Год назад

Would absolutely like to see how you go about finishing this off. Specifically the wire and the folded lip. Thanks for sharing your talent.

@CarterAutoRestyling Год назад

Thanks for watching, I'll try to make a video on the rest of the repair

@tommyt8857 Год назад

Agreed

@georgeclements2742 Год назад

Sad to hear a out the imposter problem. Please do show the welding in of the repair panel, wire edging and planishing: I really enjoy seeing the end result of repairs. Best wishes.

@CarterAutoRestyling Год назад

Thanks George, I'm glad you enjoy it!

@Group-Five-Industries Год назад

Nothing short of amazing. I have to slow down and relax!

@michaelraabe3401 Год назад

Yes would definitely love to see the patch welded in place and finished.

@ThePsychoNad Год назад

That was one of the best tutorials I have seen you do! Thanks. KANK😎

@CarterAutoRestyling Год назад

Thanks, I'm glad you found it useful!

@mana-ma-non3072 Год назад

Good stuff once again, thanks for the social media rant I totally agree!!

@CarterAutoRestyling Год назад

Haha glad you agree!

@boblowinske1616 Год назад

You are a magician, that patch looks great.

@CarterAutoRestyling Год назад

Thanks Bob!

@thomasjain7207 Год назад

Yes I would love to see you complete this repair!😊

@CarterAutoRestyling Год назад

Will do!

@midgetrace Год назад

Oh yea! Let us all see it come together!

@flattopalpha5316 Год назад

Yes, I would like to see the entire job completed and in fact, the entire car till it is road worthy.

@paulk3533 Год назад

I would definitely like to see you weld the panel In and all that goes with it. Thanks for another great video!

@dougbaker9473 Год назад

Please let's see more . You are a true metal master .

@BILL-sb5kk Год назад

THOSE KITTIES ARE DEFINENTLY CHILLIN !! KEEP THE PICS OF THOSE LITTLE MUCHKINS COMMING SO WE KNOW THEY ARE PART OF THE VIDEO REPAIRS.

@CarterAutoRestyling Год назад

Lots more cat content to come!

@victorbitter583 Год назад

Just watching this for the 2nd time today. 10/10 would watch again. cheers.

@CarterAutoRestyling Год назад

Thanks for watching twice!!!

@KCwant2fly Год назад

YES... and I agree!!!!

@michaelkorolev2115 6 месяцев назад

Thank you so much for sharing your cornucopia of valuable knowledge. Your well explained tutorials make for an enjoyable learning experience. I hope you do a second half showing the weld in process

@jerryfaulkner6518 Год назад

All I can say is I am impressed and learned a lot. I am glad my 36 chevy grain truck is going to stay original and that my 37 half ton had good bones and was bought already restored.👍

@martinpook5707 Год назад

They said it couldn't be done, With a smile he said he knew it, But he tackled that thing that couldn't be done, And he couldn't do it! Except you did and it was very interesting and educational! Excellent!

@CarterAutoRestyling Год назад

Haha awesome, thanks!

@VanishingNomad Год назад

Very nice! I love seeing oldschool metal workers! Not many of us around today!

@CarterAutoRestyling Год назад

Thank you!

@je356 Год назад

Great tutioral and spot on with your rant!

@CarterAutoRestyling Год назад

Thanks!

@joewolf4483 Год назад

Excellent patch ... master job ... and yes I would like more content on finishing the fender ... I'd probibly try to use your videos to make a buck but I couldn't replicate your dry sense of humor ... keep makin em and I'll keep watchin them ...

@CarterAutoRestyling Год назад

Thanks Joe!

@pauljohnson4846 Год назад

Please finish the finder I love the work you are a true master hands down.

@heatherkohlwey8379 Год назад

I'm still partial to the turn the fender into one giant weld look. It's authentic farmer. That was cool to see that piece of metal coming into shape. I was listening to Verdi's Anvil Chorus. Now I'll have that in my head the rest of the day thank you very much. Thank you for a great video. Cheers!

@CarterAutoRestyling Год назад

Thanks Heather! Now that this fender has been ruined, I'm keeping an eye out for an authentic farm weld fender to replace it.

@jrehtil1494 Год назад

So sorry to hear about your despair, Thanks so much for your knowledge and wit. Keep up the good work!

@frankiestein4013 Год назад

You Sir are a great character quite unique and I appreciate your RU-vid Work AND a Master Craftsman .

@ronaldfarmer1208 Год назад

Always like the metal shaping process, especially the fine tuning at the last.

@shadetreeknucklehead3675 Год назад

Definitely want to see you finish the fender. Thank you for sharing your knowledge. Beautiful work. Love your sense of humor and cat footage too.

@65cj55 Год назад

Good work, nicely explained , those who aren't as smart as us, will benefit greatly i'm sure.

@devinetime8938 5 месяцев назад

This is perfect! I have a '33 Chevy that the drivers fender looks like this one did! Thank you for the ideas!

@thestreets5206 Год назад

You're a god amongst insects ☝ 👍👍👍

@CarterAutoRestyling Год назад

Haha more like an insect among gods

@thomasjain7207 Год назад

I enjoy your tutorials and the way you explain the "why" to the reasons

@CarterAutoRestyling Год назад

Glad to hear you enjoy them!

@springwill Год назад

Your video production is improving Kyle. Your quips and sense of humor is coming through. I appreciate how you speed up for the repetitive areas - and your voice-work is more focused and to the point.

@CarterAutoRestyling Год назад

Thank you!

@allenwilliams6882 Год назад

Yes, please continue on with the wire edge, welding and finishing.

@CarterAutoRestyling Год назад

Ok will do!

@sallyholt5222 Год назад

you are very skilled and good at explaining

@paulnewton943 Год назад

Yeah build the tool weld it in. Go the full hog. Absolutely beautiful work Kyle. What a fantastic set of skills you have.

@TheToolmanTim Год назад

The patch turned out excellent. I really like your "don't rush" approach. It's uncommon to find that kind of patience these days.

@CarterAutoRestyling Год назад

Thank you! I still struggle with having patience most days

@rickardjohnson4524 Год назад

I'm glad you speed up the video of all your hard work and I learned a lot from your hard work and love the fact your saving these great Joys, Thumbs Up again and hopefully many more?...

@xlmi7021 11 месяцев назад

That is a lot of work...good on you for the patience and skill...

@CarterAutoRestyling 11 месяцев назад

Thank you!

@DB.scale.models Год назад

I love watching someone who doesn't know what he's doing😊, let see it all, to the Finnish!

@jeffsnyder2051 Год назад

thank you for taking the time for us!!

@Justme-sb8mn Год назад

You’re an amazing man. I’ve seen some bondo magic but your skills are mind blowing

@CarterAutoRestyling Год назад

Thank you!

@torchandhammer Год назад

The Log Driver Waltz is fantastic! I always enjoy me some good log rhythms.

@CarterAutoRestyling Год назад

Haha right on!

@DuckyHunter812 Год назад

Definitely want to see the rest of the repair! Your teaching ability is very inspiring.

@CarterAutoRestyling Год назад

Thanks, I'll be sure to film the rest!

@DuckyHunter812 Год назад

@Carter Auto Restyling recently watch Wray Schelin make nearly the same repair to I think a 34 Ford fender. He used only masking tape for his pattern. Your method with the cuts in the paper made perfect sense. Like the other comment I'm looking forward to seeing how you deal with the wire. Until his video I didn't even know that was a thing. I've been getting a lot out of your channel. You break things into their simplest pieces where even a rookie can grasp the concepts. I'm looking forward to ruining some steel because the next step in learning it is to try it.

@VanishingNomad Год назад

I am looking forward to see you weld the patch in, and show the final finishing work!

@paulmcmain1760 Год назад

Another quality repair

@mfwwhelan7561 Год назад

Excellent intro on how to decide on where to shrink. Mike in Germany

@rockypergin2216 Год назад

Yes please! I would love to see the process of completing this! I’m glad you took the time to show both templates! Great tip!👍

@CarterAutoRestyling Год назад

Thanks, I'll try to film the rest!

@southsideronnie Год назад

Amazing. Every time I watch! Thank you Kyle!!!

@normanroberts6680 Год назад

Great patience on your part. That is a fine patch. Would like to see the finished techniques. Always a beautiful finished product on your channel.

@CarterAutoRestyling Год назад

Thanks Norman!

@jorgefernandez-mv8hu Год назад

That patch looks great. I was amazed to see it take shape. Learned something new with the paper mold. Made all the sense in the world. I would love to see it being grafted into the fender. Looking forward to the next one.

@cut-upcustoms2660 Год назад

I am always blown away with the quality of everything you do!

@MakeItKustom Год назад

Killer work with simple tools ! Great video 👊

@CarterAutoRestyling Год назад

Thanks Karl! I appreciate you taking the time to watch!

@deanlemke29 Год назад

Wow, really got a lot out of that. Probably going to be loosing sleep waiting for the Wire edge procedure.(not kidding). Sorry to hear about your grief, hope it doesn't get you down. And AGAIN ! (someone makes it bad for everyone) Thank You. Keep on Tucking.

@stevefamfive Год назад

If cheap tools are the secret, I’m sure to be forming complex metal shapes in no time. Nope. I hope to see the patch placed in the fender. Your work is appreciated.

@curbmassa Год назад

At least you got the Bondo part right. Slop it on over 86-year old paint. Saves time, grinding discs and I`ve seen it done a hundred times on RU-vid. English Wheel In A Can.

@CarterAutoRestyling Год назад

Haha yeah I'm finally learning from my youtube mentors

@curbmassa Год назад

@@CarterAutoRestyling Ah, Grasshopper. You have a great future behind you.

@MikeyMack303 Год назад

Amazing work, as always! Very happy to see that the cats really like the NASCAR blanket!

@JulianFoley Год назад

Nice work, very helpful commentary.

@CarterAutoRestyling Год назад

Glad you found it helpful!

@BaileysDad369 Год назад

Excellent craftsmanship and great explanation of your process! I’m definitely learning. Please follow up with the rest of the repair. Thanks!

@erichutchins2113 Год назад

Thank you for educating and entertaining us.

@JimDockrellWatertone Год назад

It will be nice to see the rest of this job done. Here in Ontario we don't worry too much about dents because, well, Ontario and the roads are made of salt all winter so by the time the dents get too much the vehicle is well on it's way to returning to it's natural state any way.

@richardmarino5658 Год назад

Once again. Excellent work and teaching. I look forward to the next video. I'll enjoy watching you going forward. Rich from NJ in the USA.

@CarterAutoRestyling Год назад

Thanks Rich!

@tonynightingale4400 10 месяцев назад

Excellent fabrication and craftsmanship... greetings from the UK.

@CarterAutoRestyling 10 месяцев назад

Thank you!

@billyporter2195 Год назад

Great video, like black magic to me! Like to see the panel finished

@CarterAutoRestyling Год назад

Thanks!

@papawheelie5835 Год назад

Yeah, it takes as long as it takes. Fully realizing that what you've done so far on this fender can burn a guy out, I'd love to see the weld-in and finish when you get around to it. Great video, as always, thanks!

@CarterAutoRestyling Год назад

Thanks , I'll be sure to film the rest of it when the time comes!

@Mercmad Год назад

I built my own wheeling machine years ago using really heavy I beams . The up and down mech. Is a half of a diff housing so the adjustment is sturdy . All complete over kill . Especially when I see your wheeling machine flexing all over the place . Don't forget to tighten the bolts before they fall out 😊

@curtcooper9447 Год назад

❤ to see you to weld the fender 😊

@beef539 Год назад

Great video would love to see you weld the panel in and see how you do the wire in the back. Keep up the great work 👍

@nealnaz Год назад

Your techique of using the tape and paper to duplicate the shape you need of the replacement planel reminded me of videos I have seen of Wray Schellin's Flexible Shape Pattern technique. The ones where he uses Nylon packaging tape. Thanks for sharing your work and teaching us yet another great solution.

@jonathanmason8789 Год назад

Love the commentary on Facebook and Instagram 👍

@TheCrackerBox Год назад

Thanks for another “Brother “

@richsmith6952 Год назад

Great workmanship as usual. Haha about the bondo. Would love to see more of this project. Keep them coming.

@tomwilkinson2184 Год назад

Thank you Kyle, your experience and videos are really Great! Yes I would like to see part 2. ,sorry to hear about the b.s.

@johnkranz4004 Год назад

Excellent job Kyle Can’t wait to see part too

@CarterAutoRestyling Год назад

Thanks John!

@donnixon3528 Год назад

Let’s Finnish the fender welding. Nice.

@martinsechrist1393 Год назад

I won't be able to sleep until you get it welded in. (No pressure) Really enjoying your work. The trolls on FB and InstaG are a sad comment on our society.

@kenstevens5675 Год назад

Great video please share the rest of the repair.

@CarterAutoRestyling Год назад

Thanks Ken, will do!

@user-yx9bs8zo5q Год назад

Best panel skills out there

@russdavis1960 Год назад

VERY good info about the 2 pattern approach! Pretty sure that's the first time I've seen or heard of it. The patch panel turned out wonderful and I concur with others which would enjoy seeing the next steps to the repair. Highly educational content sir.

@CarterAutoRestyling Год назад

Thanks Russ, I don't know if the two pattern approach is "right" or not, but it works for me

@donstaples1102 Год назад

Good for you on social media left alone, never had it never will . Ecellent job on that fender patch , would love to see ya finish it , thanks for posting it ....

@CarterAutoRestyling Год назад

Thanks for watching!

@allenhiemenz1439 Год назад

Yes I would like to see you weld it in and finish it thank you for your videos excellent

@matthewfocke5360 Год назад

Master metal forming work. Thank you.

@CarterAutoRestyling Год назад

Thanks Matthew!

@markkinvig1811 Год назад

Of course we want to see that patch installed. Anyone that enjoys true craftsmanship will be eager to watch. Keep up the good work man!😊

Далее

Shocking News From Carter Auto Restyling

20:00

Shocking News From Carter Auto Restyling

Просмотров 14 тыс.

54:24

How To Make Rust Repair Panels Step By Step - Metal Shaping Shrink Stretch Profile Dies

Просмотров 295 тыс.

Wife habit 😂 #shorts

00:16

Wife habit 😂 #shorts

Просмотров 61 млн

孩子太多！一碗水真的能端平吗？ #瞧这一家子 #带娃 #四小只吖 #日常 #搞笑 #搞笑家庭 #姐弟 #家庭生活

00:19

孩子太多！一碗水真的能端平吗？ #瞧这一家子 #带娃 #四小只吖 #日常 #搞笑 #搞笑家庭 #姐弟 #家庭生活

Просмотров 5 млн

🛑самое грустное видео

00:10

🛑самое грустное видео

Просмотров 85 тыс.

ЛИШЕ ПОСЛУХАЙТЕ ЦЮ РОСІЯНКУ. "Украинские военные настоящие полковники"

00:28

ЛИШЕ ПОСЛУХАЙТЕ ЦЮ РОСІЯНКУ. "Украинские военные настоящие полковники"

Просмотров 796 тыс.

Metal shaping real time speed

29:30

Metal shaping real time speed

Просмотров 102 тыс.

Metal Finish a Complicated Weld Seam With Simple Tools. Chicken Truck Rust Repair Part 2.

48:10

Metal Finish a Complicated Weld Seam With Simple Tools. Chicken Truck Rust Repair Part 2.

Просмотров 24 тыс.

Quit Doing Body Filler the Hard Way! Amazing Simple Trick Used By Professional Bodyshops

43:24

Quit Doing Body Filler the Hard Way! Amazing Simple Trick Used By Professional Bodyshops

Просмотров 505 тыс.

Introductory Metal Shaping Class 101

35:18

Introductory Metal Shaping Class 101

Просмотров 406 тыс.

Professional Bodyshop Said This Was a Total Loss! Amateur Rust Repair.

38:57

Professional Bodyshop Said This Was a Total Loss! Amateur Rust Repair.

Просмотров 155 тыс.

Dent repair using a slapper

18:13

Dent repair using a slapper

Просмотров 85 тыс.

You have been lied to!

17:12

You have been lied to!

Просмотров 69 тыс.

Guide to metal finishing techniques, heat shrink in detail, to a file finish.

38:21

Guide to metal finishing techniques, heat shrink in detail, to a file finish.

Просмотров 11 тыс.

How to make custom patch panels with ease.

15:04

How to make custom patch panels with ease.

Просмотров 526 тыс.

How to Fabricate and Weld in a Patch Panel. Step by Step Process.

37:45

How to Fabricate and Weld in a Patch Panel. Step by Step Process.

Просмотров 32 тыс.

Wife habit 😂 #shorts

00:16

Wife habit 😂 #shorts

Просмотров 61 млн