Metric Vs Imperial: What Does a Carpenter Use?

Подписаться 383 тыс.

Просмотров 437 тыс.

50% 1

Feet, inches, meters, millimetres??
What do I use and why?
Check out Finish Carpentry TV / dfwcrownmoulding
Also RR Buildings is another great channel
/ @rrbuildings
And Essential Craftsman has an awesome channel too
/ @essentialcraftsman
Music is "Take it Easy" by Bad Snacks / @badsnacks
Last track is "Life at Sea" by Bonus Points / bonuspoints
...
I'M ON INSTAGRAM TOO
scottbrownc...
The below are affiliate links. I get a small percentage when you buy using these links. It does not cost you anything extra, but helps supports the channel. Thanks!
My Tools
Tool belt amzn.to/3dXMZnk
Tool belt shoulder straps amzn.to/3AI0VLU
Hammer with wooden handle amzn.to/3jRhQ92
Rubber grip for hammer amzn.to/3jTM7UE
Speed Square amzn.to/3yAaE5f
Makita Circular Saw amzn.to/3qYzaKH
Track Saw amzn.to/3dV9wkF
Awesome ratchet clamp amzn.to/3dSGa6s
Impact driver (main drill) amzn.to/3xDmBat
Other drill for pilot holes amzn.to/3yAYjh4
My Table Saw amzn.to/2UzuOxp
My favourite vacuum (newer version) amzn.to/3yxss0S
Full face mask amzn.to/3hH4Cce
Ear muffs amzn.to/3yNAWBl
Green line laser level amzn.to/3yqYdJ0
The Camera Gear I use
Main Camera amzn.to/3AD2if5
Backup Camera amzn.to/3jTGTbv
Main Lens (main camera) amzn.to/3wp0hzU
Lens for Backup Camera amzn.to/3jWaFfU
Microphone amzn.to/36pNWAA
Tripod amzn.to/3yxSeCb
Headphones amzn.to/3xqm2R4
Drone amzn.to/3xp9OrO
Aeropress (Coffee) amzn.to/3ijpvdQ
Donate here if you would like to help the channel
www.paypal.com/cgi-bin/webscr...
SEND STUFF TO HERE
PO BOX 3506
Richmond 7050
New Zealand
Disclaimer:
These videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Scott Brown Carpentry Ltd does not take any responsibility for any action taken as a result of the information or advice on this RU-vid channel and shall not have any liability in respect of any injury or damage that may result.
To view full disclaimer, click here: www.scottbrowncarpentry.com/d...

Хобби

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 3,1 тыс.

@daffhead4975 4 года назад

And the biggest difference between them is that metric system is logical.

@Steelmage99 4 года назад

Yep. Logical and consistent.

@davesmith2233 4 года назад

That's the biggest problem I have when trying to follow building instructions from the US, they'll tell you do do something like take a 4 foot 2 37/59th inch length and divide it up into 5/32 inch units or something, and I can't understand how anyone can reliably build something using nothing but weird fractional units and quantities that need to be rebased once they get to a certain value, e.g. inches into feet + inches.

@rimmersbryggeri 4 года назад

@@davesmith2233 Its not that hard to learn actually. Even for me who is from a thurroughly metric country.

@PHeMoX 4 года назад

@@rimmersbryggeri It may not be hard to learn, however it is still a dumb and completely inefficient system that's very prone to errors.

@rimmersbryggeri 4 года назад

@@PHeMoX Yes it is becasue it was deviced in a time where prescicin measuring devices werent widely available. So you would measure things with your body and the reference them to eachother rather than measuring every workpiece un woodworking this is sufficient since it's not a precicsion activity in any way that requires better accuracy than you could get like that or by using templates.

@topkek5164 4 года назад

Scott: "This is one metre. Inside this one metre are 1000 millimetres or 100 centimetres. That's it." ... 10 decimetres: "Am I a joke to you?"

@Vengir 3 года назад

They are there, but nobody actually uses them.

@bernardsulman1506 3 года назад

@@Vengir Use decimetres to calculate volume. I cubic decimetre = 1 litre.

@Vengir 3 года назад

@@bernardsulman1506 Yes, but we just call it liters, not cubic decimeters.

@alanmcgowan3457 3 года назад

@@Vengir No - if you are calculating shipping costs, warehouse shelving/location configurations, packaging requirements etc. Decimetres are normal, everyday units of measure - especially if you use SAP as your ERP.

@Vengir 3 года назад

@@alanmcgowan3457 Obviously, I cannot be an expert in every field imaginable and I don't know why they would choose that unit over cm or mm. "Nobody" in my comment was a hyperbole.

@Heylighen 4 года назад

-Metric system : multiple of 10 -Imperial system : rollercoaster of stupidity.

@alexashton6501 4 года назад

-Imperial System - measuring with a dream

@bowlchamps37 4 года назад

Learning the imperial can even improve your math.

@primary2630 4 года назад

Imperial is a more in-depth system. Saying it's stupid is retarded There's a reason why we still use feet and inches and still use pounds and it's not just because America still uses it. Even if America used metric people would still say, "I'm six feet tall" and not "I'm 182cm tall" edit: having 2 systems is a boon imo

@fasaso 4 года назад

@@primary2630 "Imperial is a more in-depth system." Wat teh fuk r u talkn about? in teh metric system al valus hng togethur wic maks sense. Wy shud teh "impurial" system b "deapur"?

@justasnowball 4 года назад

@@primary2630 what is the reason

@TheEvanovitch 4 года назад

Fun fact, the reason most school or office rulers are 30cm, is because a sheet of a4 paper is 29.7cm, so you can always draw straight lines across an entire piece of paper lengthwise.

@EnnovonSchwerin 3 года назад

not only that. You can also carry a 30cm ruler in an ringbinder

@sddirt6840 3 года назад

You can do that with a 12 inch ruler also...

@almostanengineer 3 года назад

Rulers have always been that size, even before A4 paper, and that's 297 mm because of the way A paper is calculated, for instance A0 is exactly 1.0 m2, and has dimensions that allow the length to be the 1/√2 meaning that we can scale any design to fit any other A paper exactly.

@pak3ton 3 года назад

@@almostanengineer lie, its because marketing staff discover that if they make the sheet in that dimension they will earn billions :v.

@almostanengineer 3 года назад

@@pak3ton I don't know if your being serious or not there, the dimensions paper were decided by an international commite and standardised in ISO 216, ISO 217 and ISO 269, nothing to do with marketing, more about efficiency, and ease of use.

@rubenthijs746 3 года назад

In metric, 1 milliliter of water occupies one cubic centimeter, weighs one gram, and requires 1 calorie of energy to heat up by one 1°C, which is 1% of the difference between its freezing point and its boiling point. Try that in hillbilly or Yankee units...

@justasklimas9572 3 года назад

Ok but why are you using outdated units like calories in your example?

@rubenthijs746 3 года назад

@@justasklimas9572 Stttt! It's to make a point, but Americans don't know it isn't a SI unit. But now you see, even non SI metric units are gracefull...

@donaldasayers 3 года назад

@@rubenthijs746 Yeah but even their pints gallons and barrels are wrong by being smaller. I find it kind of surprising that their 6 inches isn't smaller than ours as well. ;-)

@justasklimas9572 3 года назад

@@dukethotness Well calories are inferior to joules in every way but still stick around because they came first and people are lazy to switch. Where I live, they are even required on food packaging in addition to joules and most people use them instead of joules for food energy. But really there is no reason to still use them.

@dukethotness 3 года назад

@@justasklimas9572 Where I am from, Joules are only used in Physics calculations

@alitabattlechicken9732 4 года назад

I’m an American carpenter and I use metric. I wish, as a country, we would just switch to be honest. Keep up the great work, Scott

@gav2759 4 года назад

At the risk of promoting an international incident, It seems Americans cling to the 2nd amendment in order to repel any prospect of metrication. It is the very essence of conservatism... I don't know enough about the other two countries still to adopt metrication, Myanmar and Liberia.

@djsalose 4 года назад

America tried to convert..

@bobsmith-ru7xp 4 года назад

Standard is the only way to go for carpentry.

@WarriusZ3r0 4 года назад

@@djsalose America has been converted, like 60 years ago, it's just they don't want to admit it. In 1959, an agreement between the major imperial unit users at the time, i.e. UK, US, Canada, Australia, New Zealand and South Africa, was passed. It's known as the International Yard and Pound agreement, stating that a yard is exactly 0.9144 metre long and a pound weights exactly 0.45359237 kg. From that moment, every other units and subunits based on the yard or the pound was in fact in the metric system. With a dreadful conversion rate, but in metric system anyway. It was the first act. The second act happend in 1975, when Congress and Gerald Ford signed the Metric Conversion Act, stating that the metric system was the prefered system for trade and commerce. It would also be the norm in education, science and industry, but you can still use the US customary units for everyday life. And finally, a Metric Board was created in order to coordonate everything and lead the US to the metric system. Very quickly, industry went metric, and it was a blast for them. For instance, before metrication, the Ford Motor Company had about 900 references for its screws because of the different units and subunits. After metrication, they only had around 100 references. Much more simpler. But, Ronald Reagan arrived, and he abolished the board (well done Ronny, well done dumbass ...). The thing is that the myth of the chosen nation for a chosen people is really strong in the american mind, and as they consider themselves as the chosen ones, they consider they are not compelled to use the same mesuring system as the rest of the world. The use of the imperial system is part of their uniqueness. So it's going to take time, a really really really long time to make them understand that they are not THE CHOSEN ONES, they are mere mortals, like the 7.2 billions other people using the metric system in the world.

@chrisfreemesser5707 4 года назад

@@gav2759 It's a mistake to think we Americans don't use the metric system. Colloquially we use the imperial system for everyday things but business/industry has been using metric a long time. It's been about 40 years since automakers stopped using the imperial system in automotive design, schools teach students metric, the scientific industry uses it exclusively, etc. The building trades still do everything using imperial measurements. Some will say it's because the building trades are the slowest when it comes to adopting new technology, and that may be true to some extent. However, it doesn't make a whole lot of sense for them to start using metric...you'd create a situation where some buildings would be imperial and some metric, and material suppliers would need to stock materials in both sizes. IMHO it's not worth the trouble...keep everything consistent and keep using the same system, even if it doesn't make sense to the rest of you guys. :)

@gregor-samsa 3 года назад

Metric and imperial system have one thing in common: They are imcompatible with imperial.

@Cuestrupaster Год назад

Underrated comment. ~One of the best comments on RU-vid actually...

@gregor-samsa Год назад

@@Cuestrupaster thx. See my others:-)

@stevesanders3992 4 года назад

I did use feet and inch when I was a kid then we learnt the metric system along with the earth isn't flat lol

@ThecMaster 4 года назад

Say what. Is it parabolic then?

@primary2630 4 года назад

Imperial system and the earth "being flat" have nothing to do with one another. That's like saying when you switched to Metric you also stopped believing in a religion.

@Frambusjt 4 года назад

It's a joke

@Pertinax193A.D. 4 года назад

@@primary2630 wooooosh

@Intermernet 4 года назад

@@primary2630 You probably should have stopped believing in a religion a long time before you decided on a measurement system!

@DaDunge 4 года назад

Maybe in america and Britain you mix them, in Europe no one use imperial.

@matthewq4b 4 года назад

You use a 24-hour clock, don't you? Guess what you use imperial...

@DaDunge 4 года назад

@@matthewq4b Haha No we don't. Everything non-metric is not automatically imperial. Only the british empire and the americans ever used imperial we all had different systems before the metric system. For an example in Sweden and Finland we had a base unit called tum (thumb), which was slightly longer than an inch. But even back then everyone used the same 24hours 60 minutes 60 seconds despite that, it's an old Babylonian system, where the number 6 was sacred hence why everything is in multiples of 6. Oh and the second was the time of a heartbeat of a sleeping person. Did you seriously think the British invented our version of time?

@matthewq4b 4 года назад

@@DaDunge Do you think the Brits invented the imperial measurement system all on their own?. And guess what 6 is one of the main divisors of imperial measurements, in fact, Imperial and our calender/time share the same divisors. Did you think this was a coincidence? Guess what it is not. Date and time and the imperial system share the same heritage. And guess what you guys stil in Europe still use Imperial most notable in defining the purity of some metals. 24Karat gold anyone or how about a 1-carat diamond and those are not the only examples either. So ya you lot still use imperial.

@RusselsYTAcc 4 года назад

@@matthewq4b yeah we use it when it makes sense. But imperial for length etc. is just so inefficient

@l.h.9747 4 года назад

@@matthewq4b karat for gold isnt used anymore by professionals. And also what does a carat from jewelery have to do with the imperial system ? A carat is simply the weight of a sead from a tree i dont know the name in english.

@wesrobinson7366 4 года назад

I love this, having studied science in college with metric gave it up as I went on with my career. Now my shop is all metric, I mean who has time to divide fractions all day?

@Draugo 4 года назад

As a Finn I was really confused when you said Finish Carpentry TV while speaking about imperials.

@DontScareTheFish 3 года назад

Probably an American channel with someone who calls themselves Finnish because 5 generations ago their ancestors moved to America.

@NightwishArena 3 года назад

Probably he meant "finish carpentry", not "Finnish"?

@TheAllMightyGodofCod 3 года назад

Thanks for the comment, I was wondering if I heard "Finnish" or "Finished"

@Helli__ 4 года назад

Beer is measured in "Maß" (1 liter) ALWAYS! PERIOD! 😁🍻Greetings from Bavaria!

@Knallteute 4 года назад

Nah a good beer has 0.33l or 0.5l. Greetings from Lower Saxony.

@Helli__ 4 года назад

@@Knallteute 0.5l is bav. "a Hoibe", germ. "eine halbe", literally in english "a half". The base is 1 liter or "a Maß". 0.33 and 0.5 are just divisions of it. In Bavaria there's not such a weird thing as 0.33, because it is not worth the effort😁. But some breweries make it for the "Preißn". 😉

@Knallteute 4 года назад

@@Helli__ Moin ich bin ein Saupreiß und Stolz.

@alexveldhuis6004 4 года назад

Then you have not been to the UK.

@jk9554 4 года назад

@@Knallteute Trotzdem gilt: komm wieder, wenn du ein ganzes Bier schaffst :p

@chillaxo9863 4 года назад

UK: invents Imperial US: copies UK: switches some stuff to metric US: surprised Pikachu face

@Robert-cu9bm 4 года назад

King of Kings & Ruler of Rulers Metric was designed by the French, it's a hard pill for the UK to take.

@allangibson8494 4 года назад

UK: invents Imperial US: copies the units but changes the definitions. UK: realises that they can't agree with anyone how long an inch is - redefines it in metric (25.38mm changed to 25.4mm exactly) (Europe had several hundred definitions of an inch, foot and yard as well (with a foot having between 10 and 17 inches)). Finally gives up and goes fully metric so everyone knows what you are talking about. US: Imperial is better - runs spacecraft into a planet.

@2adamast 4 года назад

UK: Invent metric US: Follows some of UK with its customary FR: Metric kicks in UK: Invents imperial US: More customary UK-US: Go for common inch UK-US: Sort of switch to metric or not

@rhys6cats 3 года назад

@@Robert-cu9bm no it's a mix of all really the big European countries including France UK and Germany basically invented it

@Robert-cu9bm 3 года назад

@@rhys6cats Look up the history of metric, it was the French. "And was keen to involve other countries in its development. Great Britain IGNORED invitations to co-operate, " en.m.wikipedia.org/wiki/Metric_system

@rufixorg 4 года назад

Another great episode. I use metric system (because I live in Europe). Metric system is very simple - no feet, inch or yard. All drawings are in millimeters. Worked in UK and they use metric as well, but in some cases - imperial. And I think metric system is more precise.

@1pcfred 4 года назад

Precision has nothing to do with the system of measurements used. A thousandth of an inch is two hundredths of a millimeter all day long. Neither is more precise than the other is.

@steveknight878 3 года назад

Neither is more precise. Precision depends on what you're using to measure with. Most tape measures that I use either go down to 1mm, or to 64ths of an inch. Which is considerably smaller than a millimetre (so more precise and potentially more accurate). Of course, you could put divisions that are smaller than a millimetre onto a ruler - but it very rarely happens. Most imperial rulers have half, quarter and eighth inches, many have 16ths, 32nds is not uncommon and some have 64ths. The advantage of these is that you get many more non-prime divisors with these measurements.

@MCSTNDTCAFAG 3 года назад

You use metric system because you live in THE WORLD!

@davenoble1207 2 года назад

@@steveknight878 Thank goodness someone understands stuff. Thankyou.

@mingnz1 4 года назад

NZ Chinese here, now a days in China we use Metric most of times, however, we have our own "imperial System". Chinese inch or 寸（Cun）is about 3.33cm, Chinese foot or 尺(meaning one ruler long）is 33.33cm or 10 Chinese Inch. For house area, we use square meters like in NZ, however for farmlands, we still use Chinese imperial, which is called 亩(mu), 1 mu is about 666 square meters, just like in NZ still use arces. For weight, we use 斤（jin） which is about 500 gram， or 两（liang) which is about 50 gram.

@bami2 4 года назад

2:07 you forgot the decimeter, 10 of those go in a meter.

@phillipstai7204 4 года назад

Decimeter is a nearly perfect measurable unit. At almost exactly 4 inches it's super manageable and not only is it easy to translate to and from it easily solves the division of a meter problem that people fond of the Imperial system don't like about going from meter to centimeter. In the end it's all about what you're used to. In my personal shop I have been trying to move to more and more metric because that's what every tool I use to fix both my Subaru and Honda is. I hate having to buy 2 of everything.

@okdoomer620 4 года назад

Not only that... one cubic meter water weighs exactly 1 ton which is 1000 kilo gram... Water boils at 100, freezes at zero and so on

@ThecMaster 4 года назад

@@phillipstai7204 also. 1 decimeter cubed is 1 liter

@bowlchamps37 4 года назад

@@okdoomer620 But only at sea level and a certain pressure.

@bowlchamps37 4 года назад

@Memento Mori Decimeter is hardly used. I have not really heard it that often in 50 years of woodworking. It´s 10cm, period. Or 50cm, but not 5 decimeters.

@theamazingtypo 4 года назад

Here in the UK we use which ever is nearest on the tape measure. 40" by 1230mm!

@pjgppjgp 4 года назад

Shit, I do that all the time to meassure most accurately

@martinmcgowan89 4 года назад

best part when someone says take a eighth off, is that an eighth or 1/8 of an inch?

@XxBlueSkiesx 4 года назад

Exactly what I do!

@tedwarden1608 4 года назад

I recently brought myself a centimetre tape back and front. Best thing I ever did. Ply comes in imperial plaster boards metric does my head in.

@rrkmac635 4 года назад

easiest way to solve that issue is to buy a metric only tape, that way you have no confusion haha hate getting any size in imperial my old journeyman used to do that to me because he knew I fucking hated getting a size like 52 & 13/16ths.

@ricoblaser7231 4 года назад

we have here in Switzerland, in some areas since 1801 the metric system and the ruler in the school were always 30 cm (300 mm) long. The reason is the paper size. A4 paper is 210x297 mm. You don't need a longer scale to draw straight stitches or measure anything.

Год назад

"always" You mean back in 1801? What time frame is your "always"? Keep in mind that the A-line of paper sizes was devised in the early 20th, the german standard is from 1922.

@thegoodfight365 3 года назад

I'm born and raised in NYC and since grade school I've been convinced that the metric system was far simpler than the imperial system here in the divided states of zombieland. Thanks 👍🏾

@scottwpilgrim 3 года назад

It's easier to math out in metric, but building something is so much easier to measure in imperial. Both systems are great in their own ways.

@dylon537 3 года назад

@@scottwpilgrim In no way is imperial easier to build with I find. Metric is better in every way. Who would want to use, say "5/8th" of an inch instead of "16mm"? Why even bother writing in fractions? Smaller = more accurate. Plus it's a breeze when working with volume as well. ML, L, HL all convert into each other, makes building cabinets or pouring concrete. Even the US military uses it. That says a lot.

Год назад

@@dylon537 Nah, the Pentagon would surely have used Imperial if they had found a way to force the rest of NATO (and their various other allies) to use it too.

@TheTaxxor 3 года назад

Funnily enough, in Germany the common name that 99% of people use for a 2 meter folding ruler is "Zollstock" which translates to "inch stick" even though most of them don't even have a scale for inches anymore and even if they do, nobody is using it. But inches are still used in some cases, like for TV or rims sizes and some pipe diameters. I think that's mostly due to marketing(55" TV sounds better than a 139.7cm TV) and dpi(dots per inch) being the standard unit for display panels.

@nossnahr Год назад

Same in Sweden about the zollstock haha. We call it "tumstock" and directly translated it would be "inch log" even though they only show metric.

@Michael19830106 6 месяцев назад

No, Gliedermaßstab.

@reallyniceguy8784 4 года назад

If you have ever counted money then you officially use the metric system. Doesn’t get any easier. Debate over.

@VitorMadeira 4 года назад

Yes.

@bighands69 4 года назад

No.

@EcoMouseChannel 4 года назад

Metric Time... check Metric Calendar... and mate

@VitorMadeira 4 года назад

@@EcoMouseChannel as for time, blame the Earth's orbit. (although the metre is based on TIME!) As for the calendar, actually there was a metric one! But RELIGION did manage to destroy it... :( From 2 minutes : 08 seconds on: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RJM2FjK1zfw.html

@woodworkerroyer8497 4 года назад

@@VitorMadeira I dont blame the Earth's orbit, I blame the dude that divided it into 365.25, that into 24, that into 60, that into 60, then finally stumbled upon 10.... that is called a mathematician, not religion. By the way, the shortest google search I've ever done shows that the Gregorian calendar actually SOLVED a problem for the world since the old Julian calendar was "out of sync with the seasons."

@alanlang9119 3 года назад

Great channel Scott, I'm 43 and live in the UK, when I was a kid I would go to work with my father at the weekends and on school holidays. At school we used metric, but when on-site with my father and the other tradesmen, they would give me measurements in imperial. So had to get used to both.

@LordClunk 4 года назад

I'm in the UK, and in my mid 40's. Even though I was brought up on Imperial, I use the metric system as it is easier to use and makes more sense. Especially with weight. 1000 grams in a kilogram, 1000 kilograms in a ton. Nice and simple. None of this 16 drams to an ounce, 16 ounce to a pound, 14 pounds to a stone rubbish. I do use miles in road distances, but its not hard to convert kilometers to miles. There are 1.6 kilometers to 1 mile.

@daverog12 4 года назад

I'm sorry that I'm the person to tell you.... But your local fruit seller ripped you off when he told you 100g = 1kg ;)

@ls200076 4 года назад

@@daverog12 ssst

@Andrea-pd4mx 4 года назад

@@daverog12 100g = 1hg 1 Hecto (etto in Italiano) 1etto di prosciutto crudo =100g 2 Etti di mortadella= 200g

@cigmorfil4101 4 года назад

1,000 kg is 1 tonne = 1 metric ton. 1 ton is 20 cwt = approx 1,016 kg

@perrytheplatypus5068 4 года назад

4:20 with that ruler you brought a long forgotten memory of mine back. When I was in 2nd grade and I had such a ruler and just didn't knew what these other numbers meant. Poor German me.

@bluecrafter_ 3 года назад

Metrisch is halt einfacher. Auch bei Angaben in Drehmoment ist metrisch besser jedesmal wenn ich ft-pounds höre denke ich mir so wtf 2ft-lb=2,71nm Hä?

@andreassmed2255 3 года назад

Huehuheuheheh... 420

@getsomegloves95 4 года назад

Landscaper in the UK. We kind of use both, Feet and inches for rough measurements up to 6-8ft then switch to metres. CM and MM for anything accurate. Edit: Should of watched the video before commenting, you literally said the same thing lol.

@DiscoFang 4 года назад

For landscape & land it gets even worse.... 12 inches in a foot, 3 feet in a yard, 22 yards in a chain, 10 chains in a furlong, 8 furlongs in a mile.

@bighands69 4 года назад

+Ragdoll The only reason you are using both is because the government and EU have rammed metric standards down people throats by the force of law. Otherwise you would not be using both and would still be using imperial.

@getsomegloves95 4 года назад

@@bighands69 So your a brexit voter then? Metric is far superior for most tasks anyway...

@AlexKall 4 года назад

@@bighands69 no, metrification process in UK started long before EU existed.

@dongorrie1828 3 года назад

Should have…

@rorydonaldson2794 4 года назад

For the sheer fact your a clear, concise, polite and intelligible kiwi I feel the need to sub. Cool to see more fellow kiwis on the yt space

@Andersl201 4 года назад

Metric, there saved you 6 minutes.

@reeepingk 4 года назад

And... you're wrong. Houses and housing materials are ALL imperial measurement based.

@Bobo_Banjo 4 года назад

@@reeepingk no

@antonb9459 4 года назад

@@reeepingk Yes, everywjere in the whole world. And where they aren't they live in tents and iglous

@reeepingk 4 года назад

@@Bobo_Banjo You've obviously never been a carpenter or even visited the lumber section of your local construction supply.

@Bobo_Banjo 4 года назад

@@reeepingk i am glazier when i was in school to become glazier i had friends and even some people in my class that were studying to become carpenter so i think i know a fair share and i have never seen those supplies in imperial

@otaviomaionese 3 года назад

In Brazil we also have a mixture but more tilted towards metric. We measure roads with km, car speeds with km/h. All wood are in metric as it is the case for most stuff around. Buuuut, weirdly, steel profiles, tubues/hoses, some screws heads and threads are imperial. And we have exactly the same type of mixed measurement tools (I own a few measuring tapes exactly as the one you showed, as well as one caliper rule with both systems). I feel like the imperial will soon (maybe one or two decades) vanish from tubes/hoses, but I don't see signs of it being abandoned in screws and steel profiles.

@robertshepherd8354 4 года назад

Like a friend of mine saying when asked the length he needed he replied "25mm minus 1/16th.'

@Birb_of_Judge 4 года назад

Some people just want to watch the world burn

@TomLeg 3 года назад

I'm Canadian and do some woodwork as a hobby. Recently I was dealing with inch fractions, taking half for symmetry, assigning a portion to one purpose, and the rest to another. Fiddling with all those fractions was irritating. I realized the board began with an exact number of mm, and doing the calculations was easy. So now I'm tending to work in metric.

@Fran-fv6pf 4 года назад

I just love your work and amazing helpful vlogs. Peace and love to ya all the way from Dublin on a dreary day! Good old Scott Brown has turned my frown around with his vid!

@19Koty96 3 года назад

As a Czech, we use metric for all construction, but sawmills will still cut in inches. Interestingly, as one inch is 25.4 mm, if you cut at one inch marks, you'll get roughly just over 2 cm, just enough to plane it down to 2cm exactly. Anything above is usually cut in cm however.

@Sbjweyk 4 года назад

Metic is so easy 1 meter is 10 decimeters 1 decimeter is 10 centimeters 1 centimeter is 10 millimeters (No one uses decimeter)

@user-uf3hx3ge5b 4 года назад

Just like imperial

@RenTheMighty 4 года назад

Wdym ever tried cooking?

@dasMichal 4 года назад

Except math teacher who want to annoy you

@PGraveDigger1 4 года назад

@@RenTheMighty Cooking: 1 kilo is 1000 grams. 1 litre of water is 1000 grams. Still seems easier than cups and teaspoons, especially since not every cup and teaspoon are the same size. Not to mention the difference between dry ounces and fluid ounces.

@Sbjweyk 4 года назад

王宇 then explain it to me because I can’t find a logical pattern. Of course I don’t use it but it would be interesting.

@OrangeJulius_JMC 3 года назад

I'm American and in school they always taught us both metric and imperial so that we knew how to convert between the two.

@Somethingafw 3 года назад

@@arcticbeak it is mostly just old steel pipes and fittings that are still measured in inches. Alpex and other pex plumbing is measured in mm. And I think all plastic plumbing is also measured in mm.

@patrickd9551 3 года назад

@@arcticbeak Because marketeer can confuse the heck out of customers with unusual measurements. If I were to say, this TV is 1m20 you'd understand it immediately, but 48 inches? Not so much, simply because you are not used to it. Sounds impressive, but unless you are selling TV's for a living you have no real grasp for 48 inch versus 54 inch. Same goes for US. A 5.6 liter hemi engine sounds cool, but they have no real grasp about the actual size. Sounds cool though. As for my imperial conversions, I usually let google do the conversions for me ;)

@pendeyo 4 года назад

funny how the "Zollstock" u got literally means "inch stick" but uses the metric system.^^

@pastaebasta6255 4 года назад

Actually it is called in German "wood limbs scale in metric divisions"/"Holzgliedermaßstab in metrischer Teilung". Only "Zollstock" is easyer to use.

@lerk2009 4 года назад

pendeyo ...bitter imperial guy over here

@user-bl4oq7fd8d 4 года назад

@@pastaebasta6255 Nobody says Holzgliedermaßstab ("wooden-articular-measuring-stick") though... It might be the offical word but I have never heard anybody actually using it. Inch-stick is the way to go :P

@pastaebasta6255 4 года назад

@@user-bl4oq7fd8d Ist halt Bürokratendeutsch. 😁 Genauso gut ist auch der einachsige Dreiseitenkipper länglich bekannt als Schubkarre XD

@Jorjioo 4 года назад

I mean, in Denmark we call it a "tommestok" which is also "inch stick" but they are all in metric.

@paulgoulding9933 4 года назад

Love the videos Scott, keep them coming.

@Mastering3d 4 года назад

You know what i've been watching you for sometime now and really love what you are doing ,I am so glad that I subbed ,Because you are a really nice guy .

@poochie81 4 года назад

Potential stalker

@20Macdonald09 4 года назад

In Scotland we also have a unique unit of measurement called a ‘bawhair’

@ScottBrownCarpentry 4 года назад

😂😂

@blairybums 4 года назад

The family friendly alternative is a bee’s wing

@XxBlueSkiesx 4 года назад

🤣🤣🤣

@michaelcardwell9907 4 года назад

In wales we have 'dickhair' and for even finer work 'a nats dickhair' 😂

@20Macdonald09 4 года назад

Michael Cardwell Yeah we’ve got that but it’s a midges bawhair here 🤣

@mrbungle7586 4 года назад

Another great video Scotty. I work for Bluescope steel and everything we do is in mm. Cheers and I cut a nasty gash once on a finger using an angle grinder, I did a cut, then put the grinder down and while the blade was still spinning, slowing down, I grabbed something next to the grinder and bang, not straight slice thru my finger. Anyway I still have the finger luckily.

@nodustechnologies3989 4 года назад

there are three countries that use the imperial system: - Burma - North Korea - U.S.A. you don't want to be on a list with any of these...

@darkiee69 4 года назад

Burma use their own system, as does liberia.

@nodustechnologies3989 4 года назад

@Keith That's considered on the path to the light. The world lets it slide as they have to get on with their special needs neighbor. Officially it's metric and it's not polite to interfere in what people do at home.

@microwaveablejesus84 4 года назад

And add the UK whilst you're at it, we use a mix of Imperial and Metric just like our Canadian brothers and sisters across the pond!

@nodustechnologies3989 4 года назад

@@microwaveablejesus84 where it matters they don't. it's only where it skirts the public that concessions are made.

@TheActualSsotyi 4 года назад

Konnah Sharp I only ever noticed with traffic related stuff in my 8+ years here. Everything else is metric. At work we all use metric. In the shops everybody uses metric. I wouldn't say UK uses mix. It's just in the process of change. And to quote my manager "it's ridiculous how we used to measure ourselves in "rocks". (Stones)

@MarcusfotosDe 4 года назад

I guess the ruler length might have to do with paper sizes like A4 wich ist about 30cm too.

@WaechterDerNacht 4 года назад

The chamces are quite high. And the paper sizes have to do with the ratio of 1:1^(1/2), root of 2, which is the only format where you can fold it and get the same ratio from one side to the other, and A0 is 1m^2. So you get weir side length but perfect side ratios.

@adam-k 4 года назад

Probably. Especially that bags are often designed to hold A4 paper, so a 30 cm ruler would fit in it nicely.

@tobyk.4911 3 года назад

exactly. We also use 30cm long rulers in Germany, and surely this has nothing to do with imperial feet, ... but rather with the fact that the most commonly used paper size in Germany is A4 (about 297×210 mm ... more exactly: a rectangle with area 2^(-4) and ratio of side lengths 2^(1/2) ) ... therefore the ruler length fits well to the long side length of the paper ... and it also makes sense to choose a multiple of 10cm as the length of the ruler, rather than some odd weird number

@CurmudgeonExtraordinaire 2 года назад

But that could just be a way of justifying it instead of what really happened... Which came first, the chicken or the egg? I suspect that 30 cm was just a convenient size for rulers since it is close enough to 12 inches that it allows the company to mark both scales on it and sell it in the metric countries and in the US... In the US, we teach the metric system in school, but on a day to day basis, we don't really use it... I have a stainless steel ruler that is a bit over 16" long that has scales on the front and back -- inches with normal power of 2 fractions, inches with decimal fractions, tenths of an inch, and centimeters... I've had it for over 30 years... I think the tenths was because that computer printouts back then were likely to be 10 characters per inch and it helped with your designing of report layouts... Kind of makes sense since the wide body computer paper back then was around 16" if I remember correctly...

@jlammetje 4 года назад

I grew up in the Netherlands, and we used to bring a 30 cm ruler to school as well, and it also had inches on the other side! I was always wondering what you would use that mystical other side for, haha.And I believe my measuring tape has cm and inches both as well.

@zebradgr8339 Год назад

Well one has to translate dick size to inches when asked by the ladies

@depedrorobertson4227 4 года назад

I really love watching you videos and learning a lot.thanks for sharing

@brandono.4945 4 года назад

I'm American and it's easier to use the metric system. I use to make CNC parts and we used the metric system and I understood it alot more compared the imperial. I am now starting my career in carpentry and using the imperial way, makes it more difficult but, easy if I use the metric system. I usually have to convert it for people which is hard for me since I'm use to the metric system. 🤷‍♂️

@garcjr 4 года назад

I like using metric for small measurements. Like when you're going smaller than 1/2" or 1/4". When I cut a piece of wood it's much easier for me to visualize taking off a couple of millimeters than cutting off a 1/16" or 1/32". We should drop mills entirely because a lot of people are getting that confused with millimeters.

@manuf.eng.808 3 года назад

In the 40 plus years of working in my engineering trade, across a variety of commercial manufacturing industries, words such as centimetre, metre, and to an extent millimetre, are never used. We only need to use a number value and it is always understood that it is millimetres. For example, your bench is 1000 wide, your sheet of plywood is 1202 x 2406, those bolts are 12 x 125, that room is 3420 x 12500, that’s a 3.2 drill bit.

@blandandturner 4 года назад

Great shoutout for the Essential Craftsman!

@KathrynMarr-katgirl 4 года назад

Heard Scott Brown Carpentry referenced on the modern maker podcast last week, that was pretty trippy.

@NomenNescio99 4 года назад

Essential craftsman is the gentleman that convinced this computer programmer that working with your hands is really satisfying. Something I'm really grateful for, woodworking and carpentry have been a great addition to my life. After spending a weekend, or just an evening, in my workshop and I've created a physical object instead of computer code it's a totally great feeling and something I've been missing in my life.

@claudedondelinger9336 3 года назад

For school we (here in Luxembourg) also had rulers with 30cm (300 mm), and those rulers are still the "norm" for office etc. I think this is because of the DIN norm for paper; a standard notepad (you know, a paper one) or any letter or invoice is in DIN A4, which is 210 x 297 mm. So a 30 cm ruler would be all you need.

@hansberger4939 2 года назад

For spanking your employees you need at least a 40 cm ruler.

@pieteri.duplessis Год назад

I think this might me the first time I looked at a video from the land of the Allblacks. It was fun, thank you.

@keithkruger5841 4 года назад

Dude your killing me... im on The floor rolling... 1m and crickets..

@amycyclenut 4 года назад

metric system rules.... fractions are stupid

@reallyniceguy8784 4 года назад

Joe T what sort of backward country would have a quarter of a dollar coin?

@reallyniceguy8784 4 года назад

Be like having a $25 dollar note.

@DiscoFang 4 года назад

Joe T Your explanation explains the coins but it doesn't explain why there isn't a $25 note.

@DiscoFang 4 года назад

Joe T or for that matter why there isn't a $12 bill. If 100 cents = 1 inch then 12 of those should = 1 foot. Instead you have a $10 note.

@bighands69 4 года назад

@@DiscoFang Because $25 is not a fraction of anything and 25 cent is a fraction of a dollar. How hard is that to understand.

@tool717 4 года назад

Hi from Canada , Truly enjoy your video and learn lots , thanks for sharing .

@sallyrussell6776 4 года назад

Your shoulder straps and work belt are super cute! Totally made me want to get them but not sure I could pull them off.

@grabbin_ 4 года назад

Fun Fact: In Germany they call the foldable 2 meter ruler a "Zollstock" (=Inch stick) even though it's metric... ^^

@blankblank5395 4 года назад

mEtErMaßsTaB my boy

@mic7395 4 года назад

Same in sweden

@theloki72 4 года назад

Der Zoll hat keine Stöcke, nur die Polizei hat welche. Einen Meterstab habe ich allerdings auch.

@TucoBenedicto 4 года назад

It must be because it's messy to use and inaccurate as hell.

@chiselcheswick5673 3 года назад

That wasn't that fun... more like just a fact.

@ThePomyslodawca 4 года назад

Measuring tape in Poland is in both meteric and imperial, even though we've never used imperial so it's common in Europe too.

@jarlfenrir 4 года назад

Guess it's just because it costs almost nothing to print an extra measure. I'm also from Poland, and I've seen a lot of rulers or measuring tapes with inches but never seen anyone actually using them.

@clansman89 4 года назад

Bollocks

@MrMisterMaster 4 года назад

TVs and wheels/rims are still in imperial in Europe. I must admit a 140cm TV sounds worse than 55" TV.

@HaasGrotesk 4 года назад

@@MrMisterMaster So you got one of those 1,4 meter TV's? Cool...

@MrMisterMaster 4 года назад

@@HaasGrotesk Oh yeah! I use it to display pictures of my 0,43 meter car wheels.

@joshuasutton2163 4 года назад

I really wish that my brain was hardwired for the metric system. It just makes so much more sense. But, alas, I think in Imperial. In other news, I recently discovered your channel, and your videos are addicting. You do some amazing work, and inspire me to really take pride in my work, and have good craftsmanship. I was surprised to hear you mention RR Buildings and Essential Craftsman, as those are some of my other favorite channels. Anyways, keep up the good work, and I look forward to learning more from you!

@daltonbest9320 4 года назад

hmmm

@jaimesoad 3 года назад

In Latin America is widely used the metric system, but whenever someone comes to Panama, people tends to freak out because we use both metric and imperial systems. For length, temperature and volume we use metric but for weight and also volume we use imperial. We also use inches, feet and yards, but has to be a very specific case of use; say some piece of hardware imported from the US or paper.

@benhainsworth1247 4 года назад

Tyres are one of the weirdest measured things I've come across MM / % / Inches - 🤯

@woodworkerroyer8497 4 года назад

That is what we call a committee decision! Happily they left the fraction people out in the snow!

@sparkyenergia 4 года назад

Even stranger that the wheel width is in inches while the tyre is in mm.

@N1ko0L 4 года назад

@@sparkyenergia because the stardard were made by people using their system and i think it's pretty selfish to invent something and put standard in a non-standard mesuring system

@kanalnamn 4 года назад

The upside is that the three numbers stand far apart. You instantly know which one I'm talking about, right? 255 17 45 70 14 185 305 19 35

@Liggliluff 3 года назад

The tyre code standard is: millimeters then percentage or millimeters then inches or millimeters There's an upper bound for what it can be in percentage and inches; I think it's max 99 inches and then after that it's 100 mm. So basically 1-2 digits are inches, 3+ digits are millimeters. So the standard supports a full mm / mm / mm.

@jameihobadehre 3 года назад

I am a carpenter from Germany and i absolutely cannot imagine to work with the imperial system, maybe its because i grew up with metric but it is so weird for me. Btw In Germany we have 3 years of learning to become a carpenter the first year is just school and you don't earn any money the other two years are working in a business and going to school while doing so until you do an theoretical and a small project under supervision for like 6 hours. The last step is to build your own planned project and getting it graded. After the three years you can call yourself a carpenter but you won't be able to open your own business until you go to school again for 1.5 years and getting your "Meister" (master) How does it work in canada or usa

@mementomori5580 3 года назад

It's the other way around. People only still use the imperial system because they grew up with it. But even withing those, the majority agrees that metric is better and that imperial is weird. It's just that they used it for so long that it is more "natural" to them to still use those units at many occasions. It's simply become a habit.

@GH-oi2jf 3 года назад

Many of my ancestors came to America from Germany and some of them were carpenters, so I’m sure Germans can learn our system as well as anybody else.

@mementomori5580 3 года назад

@@GH-oi2jf Yes, they can learn it. But why would they? Even in the USA, nearly everywhere you will find that the data is given in both in Imperial as well as Metric. So what would be the incentive to start learning Imperial when you can just use Metric?

@baksban74 4 года назад

First time here, this guy loves you so much.

@geoffdean3532 4 года назад

Reading all the great comments. You have created a saga here Scott, even Ronald Regan and Napoleon get mentions.

@michelschuit5895 4 года назад

I find it anoying that phones here in the Netherlands are in measured in inch

@jasonhamlett 4 года назад

Finish carpentry is where i think about switching to metric the most...

@tdgdbs1 4 года назад

Imagine the time and expense saved if we all agree to the same system.

@woodworkerroyer8497 4 года назад

I actually used it in my latest wood carving because I had to scale the drawing up to the first piece I made. Sig figs is WAY better than fraction to decimal conversion!

@chaowingchinghongfingshong3109 4 года назад

@@tdgdbs1 We all DID agree to the same system, the USA just bailed on the agreement

@maxnovakovics2568 4 года назад

@@tdgdbs1 measurements are one thing but imagine if company's could agree on bits, fittings, adapters, chargers etc

@raider6511 4 года назад

HAHAHA. LOVE the explanation. Oh I'm in the USA. hehe. Came over from DFW (Finish Carpentry TV) but guess you figured that out. hehe.

@marcogonzalez9207 2 года назад

I just bought a digital tape measure I don’t understand the screen ‘cause it’s saids Example : 27. 9 but I don’t know how to use read in metric tape measure Can you help me with that please?

@DexMaster881 4 года назад

30cm ruler has nothing to do with foot. Its a minimal necessary measure to satisfy all standard paper sizes used in non technical school.

@Xirpzy 4 года назад

Ye imagine you had to carry a 1m ruler in a bag. Its also for convinience.

@billelkins994 4 года назад

en.wikipedia.org/wiki/ISO_2848

@danielgondringer468 4 года назад

I'm American and was a carpenter in New Zealand. Metric was easy to learn but feel more comfortable building in Imperial.

@Liggliluff 3 года назад

That's usually the case; people are more comfortable in using what they're grown up with. So I only use metric, never imperial. The issue is that people who try to defend imperial claim it's easier for _everyone._ Yeah sure; Sweden has been using metric for over 100 years; so almost everything is metric, and only metric. But sure, using a foreign measuring system is totally easier.

@XA351GT 3 года назад

When I attended Middle School 9 6-8 grades) from 1974-1977 we were taught the metric system in prep for the US to switch. Once I went to High School 77-81 they never mentioned or taught it to us again. . I actually find metric easier since everything is on 10 for everything from weight to length to temp to volume. where as imperial it all over the place

@mozki1 2 года назад

When I was training to be a joiner the some of the first tools l purchased were a Yankee screwdriver and a square pointed bradawl....guess which one has had the most use.....

@ronaldderooij1774 4 года назад

Only the screen I am watching and TV screens are still sometimes advertised in inches for some strange reason. Oh and car wheels and tyres.

@Robert-cu9bm 4 года назад

Ronald de Rooij Most modern cars use metric. 245/45 that's metric tyre sizing. .. Much harder to understand than imperial in this instance.

@Sheridantank 4 года назад

Robert 245/45 is not a tire size. 245/45 17 is correct. 245mm wide / 45% sidewall with ratio 17 inch wheel

@djmhyde 3 года назад

@@Robert-cu9bm yes.... but the diameter of the wheel is always measured in inches, in pretty much any place in the world....

@AMZZZMA 4 года назад

Question for Americans: so what will happen when a Short guy and a Tall guy measuring things? do they get different results?

@petmach 4 года назад

No, imperial units are based on metric units today.

@GH-oi2jf 3 года назад

Why would they be different?

@Ferdyn94 3 года назад

@@GH-oi2jf i guess cuz of different foot sizes?😂

@brettalexander3028 4 года назад

Was that blue handled screwdriver a Turner from the 1970's ... I still use mine occasionally built to last.

@christophercrawford2736 4 года назад

I thought it was pretty cool that he watches finishcarpentry but now I found out he also watches Essential Craftsman... that’s awesome that he watches both of them.

@Yaroslav_Tselovanskyi 3 года назад

Where I'm from no one says they're 185 centimeters, they say "meter 85"

@denjo3131 3 года назад

Here also (Flanders).

@sweetwheatsy 4 года назад

Isn't one of the reasons for the US' lack of transition that in the 1800's, when the big civilizations were making the change, their former president Thomas Jefferson stated that they would not transfer as "the metric system was too french"?

@camembertdalembert6323 4 года назад

yes. How to hate an entire nation in a nutshell with stereotypes and clichés. How can a political leader take such major decisions with such irrationnaly where a deep rationnal thinking is necessary ?

@garcjr 4 года назад

Not really we wanted to go on the metric system back then because we wanted to separate ourselves from the British Imperial units. Thomas Jefferson heard of the French metric system and thought it was, "Just what America needed."

@GH-oi2jf 3 года назад

No. Jefferson was a Francophile. In Jefferson’s time, the US had no reason to change units because we were still trading mostly with Great Britain. The metric system was not ready for adoption by the United States at that time. Europe started switching to metric for two reasons: a multiplicity of conflicting legacy units and Napolean.

@SuperSrjones 3 года назад

I spent years working on aircraft, both European and American / Canadian and became quite used to using both systems, but I draw the line at 31/64ths etc, as that is just plain crazy. But at home if I measure something with my dual tape measure and it comes to a full number in either system, that is what I use. Plus renovating an old building that was made using imperial system has to be kept in mind when using new materials.

@handyandy4x4 3 года назад

Love the yanky driver . I'm in the UK and i can use both but I don't understand we buy fuel in liters but drive distance in miles ?

@danielstruwe2786 4 года назад

Don't wanna complain but it actually is "Zollstöcke" for multiple "Zollstock" ;)

@janm7163 4 года назад

Zoll is the German inch, we call them Zentimeterstock for jokes sometimes

@WAJK2030 4 года назад

It is Metermaßstab, as Gliedermaßstab (Folding measure)

@janm7163 4 года назад

@@WAJK2030 Zollstock and Zollstöcke is correct, I've never heard Meterstab before.

@lycrist_kat8116 4 года назад

The correct word ist Gliedergelenkstabmaß. But it does not come with a pluarl I guess.

@fb100 4 года назад

@Jan M Nearly everybody in Bavaria (where i live) uses Meterstab. I think this Is just a regional used Term.

@tjeerdroukens5110 4 года назад

In The Netherlands its all metric apart of the 2 by 4’s and (what we use most) the 2 by 3 ‘s. And its like that in every European, Asian, African and South-American country

@johannes.f.r. 4 года назад

Where are you located? We call a 2x3 a 5x7 usually.

@StefAnimation 4 года назад

In the west of the Netherlands (Randstad) they call wood that is ALS sized (American Lumber Standard) 2 by 4, 2 by 3, 1 (duim) by 3 and so on.. In the east and north however they say 5 by 7, (vief bi zieven) for a 2 by 3.. Cheers

@mrjw6701 4 года назад

StefAnimation I just read your post with a Dutch accent. I don’t know why but I sounded like the guy from the Grolsch advert.

@patrickkayser 4 года назад

monitors and tvs are commonly advertised in inches too. A pound of meat means 500g though in my country, which isn't exactly imperial.

@tjeerdroukens5110 4 года назад

Johannes R south-holland

@robinhodgkinson 4 года назад

Totally agree. Since NZ was once an imperial country like the UK, like Australia, there’s lots of hang over of the old system. But actually being fluent in both is really handy. Imperial provides a convenient way of relating to everyday measurements - it’s a foot wide, it’s a piece of 4 by 2 etc etc. But when it comes to more precise measurements and calculations, it’s no contest. I mean c’mon dealing in fractions has got to be the clumsiest method around - I need to divide 7 11/16” into three pieces. 🤣. Seriously!

@yvessioui2716 4 года назад

Quite a bit similar here in Canada, Quebec province. I was born breathing imperial (1955), learn metric at secondary school, learn a lot of conversion factors in college and how to choose the right formula going with imperial or metric with each situation. Then went to work 2 professions going from one system to the other on the spot, thought only metric with main conversion factors to my students in case of need. And now, retired, I work with both system as I go building something. The most difficult, once upon a time, was to get a measuring tape with both systems on. So, I can measure and mount the framing of a wall in feet/inches and the window installation in centimeters... or the opposite. I follow the wind on this. It doesn't bother me at all. I suggest to learn a perfect use of 'rule of 3' from math and decimal fraction of all fractions of an inch (like 1/8 of an inch is 0,125th of an inch) and more importantly the basic conversion factor between imperial and metric, the easiest to learn and be confident in : 1 inch = 2,540000cm or 25,40000mm. It is in fact that precise as conversion factor comes and easy to remember too. All the remaining is flushed to the calculator using that rule of 3. As carpentry goes, 2,5 is usually enough and easy to get by head.

@taunokekkonen5733 4 года назад

00:19 burn him at the stakes! It's a 2 by 4! Madness!

@feelingtardy 4 года назад

I understand the metric system and can guesstimate the conversion. I just can't look at distance or dimensions and visualize it in metric, I only see inches and feet.

@jbjoe249 4 года назад

For me it's at another way... It's all about how we learn.

@craigmcconnell1400 4 года назад

@FUCK SHIT 2.4km isn't 2400 yards it 2400 metres

@bighands69 4 года назад

@FUCK SHIT Imperial is not more complex than Metric. Only those that have been brainwashed with international standardization would say such a thing. As a mathematician and Physician I do not find one better than the other. They are just tools to be used.

@hape3862 4 года назад

@@bighands69 Haha, what kind of "mathematician and physician" are you? "brainwashed with international standardization" already says it all.

@andymcvean9631 3 года назад

Love it!....... from quirky old UK...

@mrpoopypants9586 4 года назад

Ha! Well done Scott, now my brain is rolling around in a mess of both systems! I was about 14? when we changed over in Oz, so I still think in both. That's why they make those tape measures in both - confused codgers can look up one or the other and figure out one they can understand! Always keep one handy! Great channel Scott, love your stuff. Keep it coming! Cheers PP

@bighands69 4 года назад

Metric is a shame of a system. The idea that a base 10 system is better than a base 8 system in the real world is nothing short of crazy.

@gs5480 4 года назад

Plumber here. We use only millimetres no matter how long the measurement. Gtfo with those centimetres and inches BS.

@Dextro1945 4 года назад

True words spoken

@simonforget280 4 года назад

When you convert metric to imperial, you'll find out these measurements are close enough to imperial round numbers (x.00, x.25, x.50, x.75). From my point of view, any measurement system is fine.

@Deedumdee 4 года назад

*cough* BSP *cough*

@1235bmu 4 года назад

I can totally relate to this. I started my education on woodcrafting about 4 months ago and first it was weird to use mm instead of cm, specially for longer measures but now that I got used to it it's so much better to have clean numbers instead of like 1,5 cm

@johanrg70 4 года назад

And if you are a plumber in Sweden, you take your 3/4" pipe and cut it based on mm. Sigh.

@frozenprakash 4 года назад

First reason why i subscribed is you use Metric system :D

@quentinsherratt7969 4 года назад

Great vid 💯🎯

@Zefar77 4 года назад

Here in Sweden the Imperial measurement system was often put onto the rulers and such when I was a kid. But at some point the industry decided to just ignore it and just have Metric on them. . You can get ones with both but I believe you need to look for them. Metric is just easier to work with.

@Desi-qw9fc 4 года назад

Zefar77 keeping both measurement systems together is a worse outcome because it slows adoption of the metric system. Australia’s construction industry switched in 2 years because they got rid of all non-metric measurements and standardised in the millimetre. Other industries and counties they tried a more gradual easing-out took decades to complete the transition, or never finished. Sweden probably realised this, especially for teaching kids.

@stevegeraghty 4 года назад

Work with an auld lad in Ireland, he drives me mad with his 16” centres, can’t get his head around why the boards don’t match up

@TheToolnut 4 года назад

😁 The imperial system is better suited to carpentry, metric for joinery and cabinet making due to the required higher tolerances. 🇮🇪

@kierandoherty1600 4 года назад

In ireland Ply is imperial and plasterboard can be imperial or metric or a mixture of both. When you space trusses for example you can spread them at 2 foot centres (to suit plasterboard) but the roof battens have to be cut coz they're metric (4.8 etc). Worked with a guy (in his mid thirties) who was told to joist a foor for ply @300 centres. He did. But ply is 8×4. So he fucked up.

@mattjns 4 года назад

TheToolnut My god that is just so inherently untrue.

@joshdaly2343 4 года назад

What's worse is metric guys working at 400mm centres, and then cutting ply to fit

@mattjns 4 года назад

Josh Daly *450.

@VitorMadeira 4 года назад

Et vive la révolution française! I wonder when will the USA use the metric system? The metric system is an heritage from the French Revolution and here in Portugal, we were one of the first countries to adopt it. Thank you. Greetings.

@zackfishle1009 4 года назад

Seems like most of the science industry uses metric. Most of the auto industry is converted. Aircraft is imperial as is carpentry. Both systems are good.

@simonforget280 4 года назад

@@zackfishle1009 Depends on country of origin for aircraft (and product line). New aircraft are usually metric but I doubt that Boeing will convert 737 and 747 to metric anytime soon. This being said, I'm pretty sure the newest engines of these planes are metric these days.

@CaptainDangeax 4 года назад

@@simonforget280 Actually, Boeing is converting to nothing because of bad management. Poor engineers. Poor pilots. Poor passengers. Kill the board and get a new one, we need a plane maker to make us dream, like when the 707 did a barrel roll

@simonforget280 4 года назад

@@CaptainDangeax Totally agree! Someone needs to break the oligopoly of the commercial aircraft manufacturers. Wait, did Bombardier tried at doing exactly this? Unfortunately, it's not only Boeing and Airbus. It's the whole industry. Establishing and maintaining the required infrastructure to get another manufacturers is so complicated. And I'm not talking about training of crews and maintenance staff!

@garcjr 4 года назад

We'll only get as far as Canada or the UK.

@moymoy6547 2 года назад

Can I ask where did you buy the folding ruler? I'm really interested on trying one.

@Kromosios 3 года назад

Hey! Why don't we use light year? If we learn about it from childhood and don't use the others, it might be good. Right?

@HoboTheMan 4 года назад

Even though all of Europe uses the metric system, I don't think I've ever seen a ruler/measuring tape that didn't have both metric and imperial measurements on it. Just in case an American needs to do some measuring in a hurry I guess?

@andygilbert1877 4 года назад

HoboMan I’ve got a Stanley 10m tape rule that is only marked in metric. Fine by me, I bought it to measure the lift height of fork lift trucks and that must be stated in metric in the U.K. Though confusion arises when people measure it in imperial!

@usarkarzts4207 4 года назад

Ha, I'm from Spain and I've never seen a ruler in imperial.

@HoboTheMan 4 года назад

@@usarkarzts4207 Well here in Hungary we exclusively use the metric system but like I said we have imperial measurements on practically every ruler/ measuring tape.

@CarlosGarcia-ze6rt 4 года назад

@@usarkarzts4207 i also live in Spain and all my rulers and measuring tapes have metric and imperial

@usarkarzts4207 4 года назад

@@CarlosGarcia-ze6rt where? Maybe it for the foreigners

@alexbarber1468 4 года назад

Did my apprenticeship in NZ, now working in the states. I can see merit in both systems but I still feel like metric is the best way to go especially since 1mm is twice as accurate as 1/16th 🤷🏼‍♂️

@zackfishle1009 4 года назад

The cabinet guys just measure to 32nds of an inch.

@philleach6271 4 года назад

Zack Fishle I’ve seen a set of 10 drill bits , the biggest being 1mm all in .1mm increments. Can you let me know that in imperial please. Sure it was in a toolmakers workshop.

@timcorbett9629 4 года назад

@@philleach6271 we use thousandths of an inch .001". Same for gaps and clearances, and micrometer measure. In Canada, school all in metric, industry all in imperial. 0.1mm is about 4 thou, .004"

@1pcfred 4 года назад

@@zackfishle1009 machinists measure to the ten thousandth of an inch, or better.

@SimonX07 3 года назад

Here in the UK, I use both measurements (I'm 30) I can fit a door in imperial, most commonly 6'6" × 2'6", then when it comes to planing it, I would need to take off about 3mm to 0mm along the length 😅, its just a matter of working the best way it works for you

@notaclue 4 года назад

We haven't made our mind up in the UK yet, I use both Metric and Imperial as you highlighted in your video when it comes to heights, beer, milk, trouser waists etc.

@randomisedjacob 4 года назад

"Yet we still call this a piece of 4x2" nah mate, that's a 2x4. Get it right

@2adamast 4 года назад

And neither is 2" by 4"

@jimmybean6090 3 года назад

@@2adamast 4by2😆

@erkful 3 года назад

Nah it’s a 90x45

@DavePreissl 3 года назад

@@erkful no its a 38 by 89

@DavePreissl 3 года назад

@@SuperAdam2468 what were you modeling? Runway of like underwear.

@LucasGuarni 4 года назад

Here in Brazil (at least in the very south) we basically use just the metric system. The imperial system is used here for the old people to talk about pipes and some other specific situations. Its not hard to see people buying a pipe 3/4 inch or 1/2 inch, its a bit confusing because the stores are working today just with millimeters. Even to order studs we use 5x10 (centimeters) instead of 2x4 (inches). The same for 2x6 (inch) that is 5x15 (centimeter). Approximate, of course. The general people use just millimeters, centimeters, meters, kilometers... and most of us do not understand nothing about inches, foots, yards... as you said, watching youtube channels from USA is always trying to convert everything in mind to metric system, inches are OK, but foots and yards are very weird for us. About the liquids, absolutely just on liters, milliliters. No one here understand gills or fl oz, including myself. And for weight we use grams and kilograms, not pounds or oz. Cheers from South America!

@geomax3465 8 месяцев назад

Congrats to you! You said what not anyone said in their videos. You DONT need to do conversions. You just choose a system and then you stick with it through the entire project. Easy. I do woodworking my self. I buy the lumber in inches and foot like everyone else and then... Work over blueprints in Metric system all the way. Very easy. No more fraction BS. 😊