MF135 6 Speed Restoration #29 Front Timing Cover and Seal

Подписаться 49 тыс.

Просмотров 20 тыс.

50% 1

Fitting Perkins AD3.152 front crank seal.
In this video I fit the front timing cover and seal,
Parts seen in this video can be purchased from.
www.queenslandtractorspares.com.au or call 1300 850 097 in Australia.
If the parts you need is not on our web site, ph1300 850 097 and talk to us directly.
or
E Mail: info@queenslandtractorspares.com.au
or
Worldwide, www.sparex.com/ and look for a dealer in your area.

Авто/Мото

Опубликовано:

9 дек 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@darrenblattner2508 5 лет назад

Lance , your making this job look easy enough for a welder dude to try. Good thing i know my limitations. Excellent explanations on how and why you things in the order you do and what to look for in the process. Keep smiling son.

@johnkinnane547 5 лет назад

G’day Lance, tighten till you hear your elbow click, great never heard that one before the engines looking good and it’s been interesting watching you working on it. Thanks Lance John

@charleshart6992 5 лет назад

Great stuff Lance - looking really good!

@EmmersomBigguns 5 лет назад

Tighten until your elbow clicks. Hilarious. Gotta remember that one.

@jjhasafrank 9 месяцев назад

I removed the hole seal with out removing the timing and now I’m thinking that may have been a mistake..

@BundyBearsShed 9 месяцев назад

Some model will let you.

@BleuJurassic 5 лет назад

nice job wonder if you have a speed brace at the bottom of the tool chest

@BundyBearsShed 5 лет назад

Just got it out again, forgot I owned it, lol.

@janhelgesandnes901 Год назад

Informative video. Thanks! Is the center bolt on the pulley links thread?

@BundyBearsShed Год назад

Just UNF thread from memory.

@bryanfinney8134 3 года назад

Hey bundy really like your videos! I was wondering if you have messed with a Perkins 203? I have one I rebuilt with a 2 piece timing cover and it started leaking right out the gate and has gotten worse. Was curious if there is any tricks or better gasket material to keep that from leaking?

@BundyBearsShed 3 года назад

Not yet! I have one in storage but no room for it yet. This is one instance where I would use RTV silicone.

@bryanfinney8134 3 года назад

Ok sounds good think that might be the best option haven’t found anything else that works better so far

@travisricks3436 2 года назад

Lance, Where is the engine serial number located on my Massey Ferguson 231 tractor? It has the Perkins AD3.152 and I can’t find the engine serial number anywhere! Thanks!

@BundyBearsShed 2 года назад

On the block just under where the head bolts on would be my guess.

@brandoncotton8550 3 года назад

What did you spray on gasket to get it to stick? Great video!

@BundyBearsShed 3 года назад

Isually on machined surfaces I use aviation gasket glue, on cork I use contact cement on one side and grease on the other. For places without a gasket I use Loctite 515.

@JacobvsRex 3 года назад

So I’ve got a crankshaft or timing seal leaking on the front of a 135.....pretty badly. Is it reasonable to to the seal replacement without take the timing cover and all off? Also I’m thinking the rear seal is going as well....is that something you can live with a while if you keep it topped off or am I asking for trouble not doing it sooner than later? I don’t even have a level bit of ground where I could sit a tractor...:/

@BundyBearsShed 3 года назад

Usually the timing cover needs to be removed, for both to leak you may have some engine blow by.

@JacobvsRex 3 года назад

@@BundyBearsShed It apparently had been sitting about 3 years un-run. Cranks right up. Do you mean the blow by may be causing the leaks,, resulting from the leaks, or the leaks are a sign of blow by? Sorry, I'm a dummy with this stuff. Greatly appreciate your knowledge.