Miata Nardi install with horn & no airbag light 

THIS IS THE ONLY VIDEO ON RU-vid THAT IS CLEAR AND UNDERSTANDABLE, sincerely, thank you.

I watched many how tos before putting my momo on and you explained the wiring the best, man! Thank you thank you

Just finished this setup tonight on my 96m edition, everything works great! Thank you so much for this video!!

Great video man I’ve watched 3-4 others and the whole time I’m thinking “Man I really feel like they are over complicating things” I’m so glad you showed step by step, this is definitely the most clear and easy install video out

Just installed my new NRG wheel and your video was the best and straightforward. Thanks again.

I’m going to buy a Miata just to follow this build, love this so much, you guys should do VLOGS!!

I dont got my miata yet but i already know how to because of your great explanation. Simple, effective and clear

Good job bro! I've watched a shit load of videos and still couldn't figure it out..you were clear and understandable. .thx

Love all the detail and thoroughness

Most helpful quick release install video on here. Thank you

Really useful. Thanks. Fitting a Nardi wheel today and came across this problem. I'll put a link to your channel in my next video!

Thanks for including everything, clear and concise, appreciate it! Luckily I have an NRG horn button so I won't have to mess with the horn

Very helpful video bro!! I didn’t think I’d be able to wire my horn in or get rid of the airbag light. All the videos I seen on how to do this all did the opposite of what you did. All I did was watch this vid one time then I finally got my hub, quick release and wheel and it was easy as hell. But the hub I got was the nrg short hub but that back part you had to pry off was different for me and difficult to pry out. But overall you made this install very easy to follow and thanks!!!

Thank you so much for this video bro!! I got it all installed, no airbag light, and the horn works perfect!! Best video on RU-vid for install

This is the best video, even though that horn button faf at the end is not necessary, ot can be done differently and easier. Otherwise the best video on RU-vid. Never remove the clock spring, it'll make the blinkers not return automatically. Which is awful!

I honestly don’t understand why so many people skip both of these steps, this looks so easy. Even the least electrically minded people I feel can do this

yo thank you for this, I got my horn set up and no airbag light :) the I turned the wheel and now the horn doesn't work anymore... anyways, this is still the best video on the subject

Best explaination, going to use this to go off to install my nrg set on my 94 MX-6 V6, no videos around for that car, closest thing is the NA MX-5

Extremely clear instructions thank you very much👌

Excellent instructions simple and to the point.☝🏽💯

Awesome Miata bro! You should do a walk around of your miata, that would be nice.

Grounding the wire behind the spring worked for me too!

Holy shit a video that clearly explains how to do this the quickest way possible?!?! Great video. I know there is other more “oem” ways to this, but opening up the wiring all the way past the clock spring. But this method is 10x easier... just that u can really go back once u cut the wire... but great video non the less

wonderful install, will be really easy to restore !

Excellent, bruh. Thanks!

Thank you! Very helpful!!!

ohhhh man I want a Nardi wheel. very helpful! should start doing install vids on my channel too...

Tanks man now i know why my horn did not work

great video bro

Instead of cutting your factory Airbag harness, you should put a jumper across the terminal, or purchase a connector and do the short after the connector. (Graceful delete) but who wants to roll without an airbag anyway?

quick question, my nardi horn button fits properly inside the nardi steering wheel center hole as it should. However, when the nrg quick disconnect is attached to the steering wheel, the horn button wont fit properly inside because the NRG quick disconnect is slightly smaller in circumference. Did you have to modify the size of the hole on the nrg quick disconnect ? (make circumference slightly larger?) thank you

Question: so you just attach both the airbag wires together and the airbag light goes away?

'DID YOU JUST ASSUME MY GENDER?' - NRG Quick Release Female Connector

Why is there 20 unlikes. It’s a good video

took off the aftermarket wheel my miata came with and theres only one purple wire. No red/grey/green. SMH

will the airbag trick work for a 1997 miata or do I have to add a resistor?

i love my golf but i would like to get a miata just aside you know

This would’ve worked great if it wasn’t for my own stupidity. I thought I didn’t need the quick release so I only got the short hub. Unfortunately the spindle coming from the steering shaft is too long and the horn on my NRG wheel is being grounded from touching it so my horn is constantly going off. And to make everything worse when I took the wheel off to get the horn button out it got put on wrong so I’m currently turning my wheel to the left to go straight.🙃

10:00 it's this spring that's stopping me from putting the horn back on. Help

Did it how you said and airbag light in wtf. Horn works though 😁

Did you get that black wire with your hub or is it to keep the horn working with the quick release?

I don’t know why nobody else and why the short hub isn’t already designed to keep the clock spring and just use that oem wire. It’s easier and better

I know this is from so long ago but if anyone sees how do I put the actual button in the wheel

How did you get your backing plate out of your boss kit? I need to do this to allow room for wiring the same as you.

Will this work on a 2000 nb1 miata

did the horn button and hardware for the steering wheel come with it ?

I know this vid hella old but could you list the electrical tools needed to complete the wiring? Got kinda lost

I don't suppose you still have good links on where to grab these parts, more specifically the hub and quick release? Thanks!

What kind of shift knob is that? I want one for mine!

best how to steering wheel vid... all these other dudes hacking tere shit...no horn and shit

Planning to get a Nardi *350mm deep dish* with black spokes the perforated leather. It is, as you said, personal preference, but I'm wondering if now a few months later you are happy with the 330 flat profile, or if you regret those sizes. Also am planning the more expensive Daikei hub, which I bet you came across. Trying to get it direct from Japan a bit cheaper. Are you happy with the NRG? The Nardi is going to set me back around 293. on feabay. Wish I could find it cheaper. Also I'm going to witch out the Nardi horn button to a black blank, and then sell the Nardi one (I hope). I hate the OEM Miata airbag wheel, and am looking forward to this Nardi, but I'm a bit freaked out by the process of removing the airbag still, despite you making it look easy. Did you do the cutting the seatbelt mod? goo.gl/twun9T Thanks for your video.

Is the hub supposed to not be fastened or screwed to the car? If I really wanted to I can just pull it and it’ll come off. First time sorry

How deep is the dish? 1inch or 3inch??

What site did you order the short hub from?

Couldn't you just solder a resistor between the Red and Grey airbag cables?

You don't have to use a 3 ohm resistor for the air bag light delete?

Wait so do your turn signals still automatically turn off after you make a turn?

So u dont need to put a resistor for the airbag light

Can I get a link to every part ??

it didnt take oway the air bag light on mine -_-

is this the same for a nb miata?

Are you able to turn the wheel all the way?

Is it ok to have the backing plate off?

What size butt connectors and female disconnects did you use ?

What shift extender is that???

This is like a 600 dollar setup

helpful video, insufferable music

Almost good video but the STUPID music we can all past it should be educational not entertaining.

the music is super unnecessary

I really appreciate the informations I use to get

Honestly where was this video when I was installing a nardi x nrg setup on my FRS