Micro800 Bit Instructions Direct Contact, Reverse Contact, Direct Coil 

Thanks so much Tim :)

You are welcome Levon.

You can create a tag, data type BOOL, or if you wanted to address bits in an INT or DINT, select the tag, then enter a period and the bit number after it. For example if you create a tag called MyTag, data type of DINT, and want to address bit 5 then it would be MyTag.5

Hi Maziar. They aren't ordered because as we add videos based off of viewer comments, many times they need inserted in the middle of the series. Here is the CCW series in the order it is meant to be watched. We're still putting out videos every week or so for it so check back often. www.theautomationstore.com/ccw-micro800-training/ Here is an example why the numbering doesn't work well. Part 1 of our control panel building series is actually the 2nd video... www.theautomationstore.com/designing-and-building-electrical-control-panel-lessons/

@@TimWilborne thank you :)

@@Maz.Rafiei You are welcome, let me know if you have any questions through the lessons.

Not a repeatable fix but I should browse Rockwell Support one day and see if there are any technotes on it.

@@TimWilborne Ok. Thanks so much for responding.

Yes, I just wish I understood the default order.

Yes, make sure you are using the Logix theme so that instructions are named the way that you are used to in other AB software's.

When inserting the branch, highlight what you want it to be around. If the branch is already there, drag the instructions inside of the branch.

You can access the bits of an integer simply by adding ".0" to it. So if your integer is MyInt, then the 5tth bit is MyInt.5.

Hi James, the BOOL data type will operate the same as the B3 bits.

Thanks for your time and help looking at starting your class on CCW programming thanks again Jame

I don't know of an easy way for that since CCW doesn't have aliases in the same sense as Studio 5000. They are more of "Symbols". Probably a FIND and REPLACE situation...I can't even remember if if has that 😂Great question!

So it’s more like RSLogix500?

Hi John. Here's a link on how to set up the simulator in Connected Components Workbench software. www.theautomationstore.com/how-to-use-the-allen-bradley-micro800-simulator-in-connected-components-workbench/

@@TimWilborne Thank you for your answer.

@@johnelkinquinteror7673 You are welcome John.

I can program Siemens but I wouldn't call myself well versed in it so I would probably steer away from it.

It is free, see this lesson series. twcontrols.com/micro800-connected-components-workbench-lessons

You are not missing anything, I just pointed to the wrong data point when speaking.

@@TimWilborne okay, that's what I was hoping. The inputs should be on top IMHO. Great videos. Thanks.

Yes it has stumped me many times as to why an input wasn't switching when I was looking at the outputs by accident.

Yes, it seems counterintuitive and not even alphabetical.

You will need to get it from the person who programmed it. Your only other option is to clear the program out of the PLC by updating or resetting the firmware but you machine will no longer work.