No video :(

Microphonic Feedback with Covered Humbuckers - Is there an easy fix?

Подписаться 373

Просмотров 9 тыс.

50% 1

Does your humbucker equipped guitar produce unpleasant high pitched squeals in the presence of a loud amp? I have two such guitars (Fender American Professional Telecaster Deluxe and Fender Alternate Reality Sixty Six), and I saw on the Dylan Talks Tone channel that this problem can often be easily DIY'd. In this video I will demonstrate the problem, implement Dylan's suggested fix, and finally test the guitars to see if the fix works.
Here's Dylan Talks Tone Video: • How To fix a Microphon...
This video uses these sounds from freesound:
music elevator.wav by Jay_You ( freesound.org/p... )

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@soup4495 Месяц назад

Thanks this worked on my bass. It had so much handling noise before and now its much better!

@dispersemedia Год назад

You don't need to remove the covers. Just put the wax at the back plate and let it flow inside when melted. The goal is to fill out all air gaps inside the pickup.

@themanncave2143 Год назад

That's smart.

@ScottfromBaltimore 2 года назад

It's great to know you can pot a pickup without taking it apart. I had a 60's Japanese guitar with one pickup that you could talk through, it was so microphonic. I wish I had tried this with that, but I didn't know it could work.

@themanncave2143 2 года назад

I don't know if this trick works all the time - I think it just works when the cause of the feedback is the pickup cover resonating against the pickup.

@dwaynewojtysiak2815 2 года назад

I'm sorry I missed your replay if life got busy and still not addressed. Here's what you do get a pot melt some wax not crazy low temp dip pickup weight till air bubbles stop couple min all set no more microphone. May your journey shin brother and the creator bless you.

@dwaynewojtysiak2815 2 года назад

Day late or 7 months hay the story of my life sorry take care

@tiagocontieri 10 месяцев назад

Dude, thanks so much for this video! I'm having exactly the same issue on my guitar (it's a squier though) and I'm probably trying this today. It's really annoying not being able to use the overdrive as much as I want because of the microphonic feedback. Nice work on your guitars!

@themanncave2143 9 месяцев назад

Thanks man! I ended up switching those humbuckers out for the CuNiFe widerange pickups - need to do a video on that.

@the_deadofwinterofficial Год назад

i liked this video because you were honest with telling us you have never done anything like this before lol. im glad it worked out for you. the reaction was genuine! There is many opinions on how to install HB covers like this wax idea or even drops of silicone on a piece of masking tape on the slug side for protection against the pickup..... The pickup itself should be wax potted itself like when you buy an aftermarket one, but this is a great way to put a barrier between the metal cover and the actual pickup and potentially eliminate some squeal.

@Area-nc7gs 3 года назад

Thank you for creating this very informative video. It deserves a lot of views and credit. I'm having this very issue with one of my guitars for a long while now. I might have to dive in and try your procedure!

@themanncave2143 3 года назад

Good luck! Be careful to not damage the coil when you pull the cover off!

@christoguichard4311 2 года назад

A guitar that costs well over a thousand bucks shouldn't have issues like that anyway.

@themanncave2143 2 года назад

I agree. I was kind of disappointed with the pickups in the tele deluxe. I have since swapped them out for some CuNiFe wide range humbuckers which are freakin awesome! But it was also disappointing for the 66, but at least that one was easier to fix.

@christoguichard4311 2 года назад

@@themanncave2143 Should have got a Classic Vibe Tele Deluxe 😉👍🎸

@cugir321 2 года назад

@@themanncave2143 should have called fender!

@ronniewebster4365 2 года назад

Awesome thanks for posting this. I will do the same with my Deluxe and let you know how it comes out.

@themanncave2143 2 года назад

Good luck, man!

@ronniewebster4365 2 года назад

@@themanncave2143 Update! My pickups actually had some wax on them but, I don’t think it was enough and very uneven. I ended up just putting the guitar back together without the cover and yes the crazy nasty feedback is gone :) I was hoping mine would be the cream color like you have which would have looked great with silver burst and black pickguard but naa just black. Oh well sounds great now. Might try adding more wax and putting the covers back on after a while.

@alinvain1964 3 года назад

Thanks for this video! I have an American Professional II Telecaster Deluxe that has that same issue. I'm going to use your video as a guide to fix mine.

@themanncave2143 3 года назад

Best of luck! Be very careful when prying the covers off! It might help to heat it up really well with a hair dryer. BTW, I'm putting a set of CuNiFe widerange pickups in mine, but will have to route out the cavities slightly to get them to fit. Will post a video on that one day!

@alinvain1964 3 года назад

Well, I did it! There was a small amount of wax inside but not enough to make it difficult to remove the cover. The hardest part was pushing the razor blade against the solder with one hand while holding the soldering iron on it with the other. I used plain silicone caulk over painter's masking tape and it worked like a charm! Thanks again!

@themanncave2143 3 года назад

@@alinvain1964 I’m glad it worked! Yeah, cutting the solder is a pain sometimes.

@taylorw362 2 года назад

Thanks for this! Having exact same issue in my new tele deluxe.

@themanncave2143 2 года назад

Glad it helped! Since I did that video I put some CuNiFe Widerange pickups in there, and man are the good!

@aaronw.markel9319 Год назад

I would suggest melting the wax in a cup first, an using a brush, brush the melted wax over the area. Nice even coat

@mkds7756 Год назад

That won’t work, not a thick enough coat

@Kymuria 3 года назад

Hey! Thanks for this video, you helped me a lot. Like and suscribed.

@themanncave2143 3 года назад

Thanks!

@rogereverett4467 Год назад

I have a Firefly SG with this issue. I’ll have to try this method.

@devisganteng502 2 года назад

8:30 solution thank's 🙏👏👏👏

@themanncave2143 2 года назад

you're welcome!

@marinbutkovic7117 Год назад

nice..i have a cheap 70ies les paul copy that i like but i have the same problem..will try this later🤓🤓

@dwaynewojtysiak2815 2 года назад

I don't know the man but on my guitar journey I have run into a lot of people with a lot of opinions but if you really won't to know what and how Dylan is one of the most under rated pickup makers in the country I ait lying🤥.

@themanncave2143 2 года назад

Never tried his stuff.

@dwaynewojtysiak2815 2 года назад

@@themanncave2143 tell him what voicing you are looking for he will set you up .

@Rebelionisduty 2 года назад

Thank you so much dudes, really needed this 👍🔥

@themanncave2143 2 года назад

No problem 👍

@angelsairwaves3871 3 года назад

Hey man, i have an epiphone es-333 tom delonge signature with uncovered gibson dirty finger humbucker pickup and having this microphonic feedback squeal or whatever it called, how i fix this problem? Your answer will help a lot, thanks btw for this amazing tips!

@themanncave2143 3 года назад

Thanks for the nice words! I'm not an expert on these things, but if the pickup is uncovered and squeals, that might mean you need to get the pickup potted (where you dip it in molten wax) - that keeps the wires and stuff inside the pickup from vibrating and causing noise. Sometimes pickups are potted at the factory, sometimes not.

@danpaolillo2636 2 года назад

Great video! But I’m wondering, what if you just took the covers off, and left them off?

@themanncave2143 2 года назад

That's an option! I kind of like the look of the covers, though. It can also be that the pickups feedback without the cover, in which case you might consider having them potted with wax to stop the noise.

@zakkcovers18 2 года назад

Thanks 👍

@fumanchu7073 Год назад

Great vid! JUst got one of those Firefly guitars (SG copy) with the humbuckers that are totally microphonic, hoping this will be a solution vs replacing (trying not to since that would defeat the

@themanncave2143 Год назад

Good luck!

@milosnipez2753 Год назад

have you done it and did it work? i want to record music but cant stop high gain feedback

@fumanchu7073 Год назад

@@milosnipez2753 jury still out. I did it and no longer feeding back but the pickups tone seems kinda dull...don't know if it's due to the pickups themselves or adding the wax.

@863TheTravis Год назад

Going out on a limb but did you make sure to reset to the previous height or did you by chance put them lower/higher cause that will mess with tone like that too

@DwmwiIslary 10 месяцев назад

After doing this is there any changes in guitar tone?

@themanncave2143 9 месяцев назад

No - sounds the same to me. Thanks for watching!

@catking7901 2 года назад

You can also use tiny drops of silicone

@themanncave2143 2 года назад

Like silicone sealant type of stuff?

@EM-km8em 6 месяцев назад

Im having this exact issues on all 3 positions on my les paul knockoff. Both bridge and neck pick ups. What could be the cause ? My gibson doesnt do this

@themanncave2143 6 месяцев назад

maybe - I am starting to check if the pickups are potted before I buy things these days so I don't have to mess with things like this!

@EM-km8em 6 месяцев назад

@@themanncave2143 found out it was the bridge pick up cover on mine. Took it off and its fine nownlol

@angelikamariae Год назад

Does it have to be wax or it can also be another isolation material? I am under the impression that the heat not only will melt the wax, but also will affect the pick ups.

@themanncave2143 Год назад

When I pulled out the pickups and removed the covers, there was a foam with adhesive on both sides between the pickup and the cover. So I guess you can do something like that. I don't think heat levels that melt wax will affect the pickups. Wax melts at low temps and the pickup parts (copper and other metals) are unaffected by these temperatures.

@pjo1964 2 года назад

The iron is touching the wires!😮

@themanncave2143 2 года назад

Man I suck at soldering! I need some lessons.

@marvelharris9540 Год назад

adhesive silicone would have been much easier to use and works great...

@themanncave2143 Год назад

Yeah, this method is a bit of work and it is easy to mess up a pickup.

@billpugh58 5 месяцев назад

Its irreversible, so resale value of any vintage guitar goes way down. I would never buy and old guitar with that mod. For modern guitars it doesn't matter.........