Тёмный
No video :(

microsd with worst damage 

HDD Recovery Services
Подписаться 141 тыс.
Просмотров 79 тыс.
50% 1

for data recovery call: 855.366.4232
or request your service here: www.hddrecovery...
Data recovery tools: www.acelab.eu....
This card was sent to us by another data recovery shop for the extraction of content. The card did not display any activity from the translator. After initializing this card, every sector just showed empty sectors. Usually, this type of behavior is related to a broken connection with the NAND, but this card was sealed. In the past, we had seen cards with damaged traces caused by saltwater damage at the interface, but not way deep into the mask. After testing continuity between opposing poles of traces, we found 16 traces that were not conducting. It goes without saying, that this was a highly technical and precise procedure that really did challenge our skills.
if you want to ship your failed device to us for data recovery and free evaluation, simply fill out this form: www.hddrecovery...
and send your drive boxed with bubble wrap to this address:
HDD Recovery Services
391 Bank St, Suite 201
Ottawa, ON
K2P 1Y3
Canada
Updated 2020 my gear for soldering:
I record all my videos using this HDMI Switcher: amzn.to/31LCsq6
Green inspection light amzn.to/2DFJoYu
Platter extractor: bit.ly/2YhQD2y
Momentary foot pedal switch amzn.to/2OSqjZF
Vacuum pump amzn.to/364XWxa
Cleanroom wipes: amzn.to/2ZLj49G
Programmer amzn.to/2DRjL7a
Quick pogo pin adapter for eepROM amzn.to/33TYVyO
Microscope: amzn.to/2rqWcwr
Vacuum chip pickup tool: amzn.to/2tNCSxc
Multimeter: amzn.to/2EHKAxO
Microscope camera 21mp 60fps 1080P: amzn.to/2Rb5cUq
JBC precision soldering iron and tweezers: amzn.to/33MACm8
Hot air station: amzn.to/2K7Mztk
Infrared preheater: amzn.to/2rYCH1c
Flux dispenser: amzn.to/2spLw4D
BEST Flux: amzn.to/2mXJd1b
Wick: amzn.to/2mNr0Xh
Solder: amzn.to/2mtyC0a
Solder paste for BGA reballing: amzn.to/2LrKQCi
NAND BGA rebelling stencil amzn.to/33Oq9a5
Gloves: amzn.to/2mbHWDI
Fume Extractor (mine is no longer available but this is the new version of the same unit) : amzn.to/2mNCmL7
Gear for filming:
small camera: amzn.to/2mNw51T
big camera: amzn.to/2Ficg9o
Lens on big camera:amzn.to/2Cx3fGw
this video: • microsd with worst damage
Music by Mr. Chase - Pulse - thmatc.co/?l=2...

Опубликовано:

 

5 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 393   
@shadowwolf225
@shadowwolf225 10 месяцев назад
I'm no stranger to board surgery including jumping traces that look ok but don't ring. Watching this from my level of competence was extremely enjoyable. This is the culmination of having all the right kit and having a technician that is an absolute master at his craft. Well done man! It may have taken only 22 minutes to watch but I wouldn't doubt this being a 22 hour project. You do make it look easy. Sign of a true master.
@hddrecoveryservices
@hddrecoveryservices 10 месяцев назад
Thank you! I am glad you think this. This truly means a lot. It was a long battle and a struggle with this card, but I have to say that this is my absolute favorite card repair to date. I even epoxied the card after and it's on my keychain now LOL (seriously)
@catharperfect7036
@catharperfect7036 4 месяца назад
JBC Nano?
@TradieTrev
@TradieTrev 3 года назад
The hands of a surgeon! Lovely done!
@ZED-PV
@ZED-PV 3 года назад
Even a surgeon doesn't need those hands 😂😂
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks guys!
@theroyalaustralian
@theroyalaustralian 3 года назад
@@hddrecoveryservices do you fix fake micro sd cards forced to read past sector y or x or whatever it is?
@hddrecoveryservices
@hddrecoveryservices 3 года назад
@@theroyalaustralian they overwrite SA by exceeding the physical limit and become unrecoverable. SA contains markers for block sequence
@theroyalaustralian
@theroyalaustralian 3 года назад
@@hddrecoveryservices are you able to fix this is what I asked
@Jdbye
@Jdbye 3 года назад
And here I thought Louis Rossmann's job was hard. This is a new level of microsoldering. Nice work.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
slightly different scale :)
@MilanGajicBuva
@MilanGajicBuva 3 года назад
Patience of a saint man. Watching you work with those tiny wires rickels my anxiety nerve. Awesome!
@TheSudsy
@TheSudsy 3 года назад
Me: Can't tin a 2mm copper cable HDD R S: Tins a microscopic trace
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Hahaha 😂
@charackthe
@charackthe 3 года назад
I can't even solder cables to an led strip :D tip is too big I guess :)
@pjhb_microsoldering_portugal
@pjhb_microsoldering_portugal 3 года назад
Amazing soldering skils, thanks for your videos 👍🇵🇹
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Glad you like them!
@richards7909
@richards7909 3 года назад
Amazing. Hand soldering anything that small is a miracle. Fixing that many issues is mind blowing. As for the apologising for the mess of the fixes and the flux, the fact you managed to get some data off it intact is fantastic and I hope the customer appreciates it, Finally, you should get a nice high res picture of it taken and blown up (with a little inset of the card at actual size for scale) to show customers what can do :)
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thank you Richard!
@tompeters4234
@tompeters4234 3 года назад
This was a crazy ride. Excellent editing showing the parts. It's easy to forget the amount of effort to beautiful sensible videos. I am still amazed at the effort put in on this one little card. The taste of success is always great.
@polestar696
@polestar696 3 года назад
I got to say you are a very talented man. Can't believe you managed to repair that card. Love the long format of you videos. All the best from UK.
@ToPanPawel
@ToPanPawel 3 года назад
Master at its work! Magnificent job! Congratulations!
@hddrecoveryservices
@hddrecoveryservices 3 года назад
thank you
@paultomlinson528
@paultomlinson528 3 года назад
Well done mate, that's a huge amount of work well done!
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Challenging work is always the most rewarding to resolve
@BradBo1140
@BradBo1140 3 года назад
That was absolutely FASCINATING. I know there are ways to get data off a damaged harddrive if the surface isn’t destroyed. But I never realized it was possible to rebuild contacts at this level. After awhile I noticed your probes had a micro tip. They looked too big initially.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
thanks Brad, yeah the tips are genuine fluke micro series, but they are huge for this job. I need to get or make some finer ones for sure.
@Bobbias
@Bobbias 3 года назад
Never seen anything like this before. It's incredible to see what's goes into this kind of work. I had no idea it was even possible for a microSD to sustain that sort of damage.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks for your feedback
@EmcBraz
@EmcBraz 2 года назад
I loved the idea of taking a picture and then identify the traces by different colours. I will use this to repair a damaged keyboard membrane. Thanks!!!
@patrickbetts5504
@patrickbetts5504 3 года назад
Wow. This is precision soldering! Patience does pay out.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
thanks
@iainstingemore4048
@iainstingemore4048 3 года назад
Great work and you still didn't give up on the card, can't see anyone persevering as much as you do.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
There was a few times where I thought it's cooked. Until the last signal was traced to ground, I even had a dead end outro filmed :)
@iainstingemore4048
@iainstingemore4048 3 года назад
Brilliant different endings I've only seen one you couldn't do because of the physical damage on the discs of an HDD because of you I shall never throw a drive away I will try controllers arms etc. Great job mate.
@fixitman2174
@fixitman2174 Год назад
Every PNY flash device I've ever owned has failed. Seeing those traces confirmed my suspicion: their products are poorly made. Thanks for the video, and good job recovering what you could from that piece of garbage.
@johncunningham5435
@johncunningham5435 3 года назад
This is a lot of work; "I like the full content", gives greater appreciation in how the operation is performed, (excellent).
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thank you very much!
@mdwdirect
@mdwdirect 3 года назад
Brilliant and thorough analysis and repair.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
thank you!
@roseelectronics4582
@roseelectronics4582 3 года назад
The GOAT is back in business!
@hddrecoveryservices
@hddrecoveryservices 3 года назад
What up 😜
@skm5779
@skm5779 3 года назад
The Bear is looking for you.
@playmangostingiu2217
@playmangostingiu2217 3 года назад
Thumbs up this time is mandatory. That's incredible how you managed this situation and made that electronic micro surgery job . Tools can help but a good head go beyond and is a guarantee for best results
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks for your feedback 👍
@androidhacksandtricks641
@androidhacksandtricks641 2 года назад
You have a lot of patience. Nice Job 👍. Keep it up. For sure, None other repairer can do such a hard work on these rotten devices like you did.
@dtiydr
@dtiydr 3 года назад
I used to do similar and even smaller solderings without a microscope since I'm nearsighted but its really getting a toll on you so you need to rest time to time.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Smaller :) without the scope... That's not possible 🤣🤣
@joesalgadSF415
@joesalgadSF415 2 года назад
Bro you’re a master at this and please I don’t mind the long videos. Thanks
@hddrecoveryservices
@hddrecoveryservices 2 года назад
Awesome
@jacobandtanya
@jacobandtanya 3 года назад
Great work. This is why I chose to send a sd card to you for repair recently.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks guys
@justacardshort
@justacardshort 3 года назад
I'm not sure why RU-vid decided to wait two days to send me a notification for this episode but better late than never! Glad I was able to catch this one. That card would have beat most anyone, especially without a donor! A big round of applause on this one bro.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks Jonathon. Great feedback
@gwhiz1397
@gwhiz1397 2 года назад
Remarkable patience. Bravo!
@hddrecoveryservices
@hddrecoveryservices 2 года назад
Thank you, this has not been a simple one :)
@zomaardan
@zomaardan 3 года назад
Im 52 and homeless and i want to learn this but i dont know how to go about. You're my new hero sir. I quess you must feel pride, i would.
@hightttech
@hightttech 3 года назад
What is your current trade or skillset?
@rmirov
@rmirov Год назад
I had a uSD card that may have spent a few years in brackish water. Initially it looked like the traces to the card-edge fingers were the only opens, but fixing those didn't work. After learning from you about "scratch pens" I took off the rest of the epoxy and found quite a few opens right in the middle of the card. It turns out that the "Made in China" laser-marked text on the card backside caused the epoxy covering to thin so much that the underlying traces could corrode. I could almost read the text in the copper corrosion pattern. Adding nine jumper wires allowed the drive to be recognized and a directory structure to be pulled off for recovery.
@hddrecoveryservices
@hddrecoveryservices Год назад
That's amazing my dude!
@rmirov
@rmirov Год назад
@@hddrecoveryservices I've not been able to play the recovered mp4 file yet ("moov atom not found" error). But clearly fixing all the opens due to the corrosion worked. I don't have the recovery tools to fix the file. Ping me and I can send you some images of the corrosion pattern.
@sysghost
@sysghost 3 года назад
I've tried to recover data from micro sd cards myself once, and I know how tiny these traces are. Amazing to see how efficiently you rewired them. I kept getting shorts to ground all the time as I kept getting solder-bridges all over. But eventually, I managed to get it right. The hardest part for me was to expose the copper layer. I just didn't have the tools for it. There I wonder... what tool did you use there to expose the copper layer like that?
@HandFromCoffin
@HandFromCoffin 2 года назад
it's a fiberglass "pencil"
@smokingone
@smokingone Год назад
amazing that you were able to get it to read!
@hddrecoveryservices
@hddrecoveryservices Год назад
Thanks 👍
@numbr6
@numbr6 2 года назад
I've seen chip reballing templates. If a solder trace template could be made for each uSD card you might just use solder paste, heat it up, and possibly that would re-connect all of the degraded traces. Brain surgeon scale work for sure! Well done.
@hddrecoveryservices
@hddrecoveryservices 2 года назад
Force of tension will not let traces link. Each end will pull solder to the center
@stephenperez3134
@stephenperez3134 2 года назад
Wowza! Incredible patience and work.
@varmint243davev7
@varmint243davev7 3 года назад
Another unbelievably amazing recovery - there is no way you could have made money on a job like that - your pride won't let you be beaten by a chip :-)
@marcellachine5718
@marcellachine5718 10 месяцев назад
Of course he made money on that job.
@colliecandle
@colliecandle 3 года назад
Your channel is certainly the best form of advertising there is for the type of work you do. i will be sending you a SState drive soon, which will be a 'breeze' after this hellish fiddly job on this video.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
sounds good!
@technovatives
@technovatives 3 года назад
Sir, you have any online course on data recovery. I really want to learn this
@johnflynn6140
@johnflynn6140 3 года назад
right and this guy knows his stuff boy.
@aonoloki
@aonoloki 3 года назад
In my mind, his channel could be use for teaching stuff, every video contain some cool stuff/knowledge
@GetGood5
@GetGood5 3 года назад
This was awesome :) I love these kinds of impossible repairs!
@jmikronis7376
@jmikronis7376 Год назад
Good detective work! You and I can do this type fixes all day long.
@chrisvanalstine8136
@chrisvanalstine8136 2 года назад
The new and improved Jumper Drive! A whole new meaning to the term Jump Drive. (I know it's a micro SD card)
@hddrecoveryservices
@hddrecoveryservices 2 года назад
:)
@kazimierzwoynski7575
@kazimierzwoynski7575 3 года назад
Each another wire like another card in house of cards :o Did you send this frankenstein sdcard to the customer or do you keep it in a honored place :p? P.S. I think longer videos from time to time are nice and fit 100% right to "the character" of Your channel :)
@hddrecoveryservices
@hddrecoveryservices 3 года назад
I think so too! Thanks for your input
@HBPowerwall
@HBPowerwall 3 года назад
Nicely Done!
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks
@john.84
@john.84 3 года назад
Hi I love this video, Your micro soldering is excellent, You did a great job. Please keep going and make videos like this GOD bless you
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks my friend
@wojciechtechtips1602
@wojciechtechtips1602 3 года назад
This is why backups are important
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Yes, but ain't nobody got time for that :)
@JKnight89
@JKnight89 3 года назад
Ok, this stuff is amazing! I've NEVER thought this stuff was possible!
@burritoboyee
@burritoboyee 3 года назад
Well compiled video, really did achieve what you set out, straight linear account of what happened and how you figured it out, definitely didn't look as damaged as it clearly was 😬
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Great feedback!
@wizdude
@wizdude 3 года назад
Such dedication and such delicate work. This was a great recovery video. Well done and keep up the amazing work that you do :-)
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks David
@yuppiehi
@yuppiehi 3 года назад
Not questioning the sanding of the outer plastic, but wouldn't it be safer to use something like acetone or something else non-abrasive to remove the plastic?
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Laser would work great but produce fumes and a bit overkill I think. Chemicals are toxic. Scratch pen works great, costs virtually nothing, and almost impossible to damage the card with it.
@dennisseuferling815
@dennisseuferling815 3 года назад
I have seen this before on a USB stick. It is likely the traces delaminated (heat?) and broke off. Copper work hardens so it wouldnt take much movement to break them.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
I test each card or monolith not specifically for that reason. One trace can go bad and card stops responding 😃
@mariorossi1633
@mariorossi1633 3 года назад
I'm always amazed by Your ability but this is astonishing, I've never seen anything like this before
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks Mario!!!
@kilrahvp
@kilrahvp 3 года назад
That guy's data must have been REALLY valuable...
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Always :)
@bkrich
@bkrich 3 года назад
Awesome job, you sir are a master of your craft 👍🏼
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thank you kindly
@levitated-pit
@levitated-pit 3 года назад
woah .... excellent skills with a steady hand
@rdp8545
@rdp8545 3 года назад
Amazing work buddy!..... I'm learning a lot from you!! You are truly an expert at this sort of work.
@TheSinasteria
@TheSinasteria 3 года назад
wow that was insane and nice to learn from wana try that myself ,was really inspiring to watch that through and clean with precision work
@hddrecoveryservices
@hddrecoveryservices 3 года назад
I am glad you liked it
@arunsharmadatarecoveryexpe8525
@arunsharmadatarecoveryexpe8525 3 года назад
Great Efforts, Hats off
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks
@tavros314
@tavros314 3 года назад
The skills of this guy! amazing
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thank you!
@IC9020
@IC9020 3 года назад
Extraordinary work.. I think this soldering job takes much time. Perfect 🤩
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks 👍
@techazepro6105
@techazepro6105 3 года назад
Guys with important data in a broken SD card would be happy if they lived close by this guy
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Haha, true
@rajnish747
@rajnish747 3 года назад
Wow wow buddy, you're a data hero! Nice video! I'll subscribe! 👍
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Haha, thanks dude
@sergejpopov1646
@sergejpopov1646 3 года назад
Вот это ювелир! Просто тараканьи пиписьки, как такое можно паять? Спасибо за работу, всегда очень интересно смотреть и английский понятный. Все слова чётко и ясно слышны.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
С микроскопом и NANE паяльной станции от JBC это возможно. Паять не проблема. Трудней было выявить что паять :)
@leeheggie7043
@leeheggie7043 3 года назад
Top repair again so dedicated to your work.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks
@vincenzodigrande2070
@vincenzodigrande2070 2 года назад
Wow, did my first repair on a 64gb micro SD today that had just one connection damaged, this one you had was really a horror story.
@hddrecoveryservices
@hddrecoveryservices 2 года назад
Yep, this card was fun to work on
@cerretjans1040
@cerretjans1040 3 года назад
Now, with this episode I'm feeling confident enough to... save your number on the contatcs, just in case.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
🤟
@PIKACHU-zn8fx
@PIKACHU-zn8fx 3 года назад
No doubt. You are a electronic surgeon
@hddrecoveryservices
@hddrecoveryservices 3 года назад
:)
@Txepsiyu
@Txepsiyu 3 года назад
Somebody wanted that data back very badly.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
With prices for this stuff, usually they do :)
@DomDEngineer
@DomDEngineer 3 года назад
Awesome work! Did you ask the customer what was the potential incident leading to this? Impact? Extreme temperature?
@hddrecoveryservices
@hddrecoveryservices 3 года назад
this card came from a data recovery shop that outsourced it to us
@dinkc64
@dinkc64 3 года назад
awesome episode, keep up the good work :) The editing is perfect
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thank you so much. Really means a lot to hear feedback like this
@BuzZ.
@BuzZ. 3 года назад
another satisfied customer !
@hddrecoveryservices
@hddrecoveryservices 3 года назад
he sure was :)
@Jason-yb8bi
@Jason-yb8bi 3 года назад
It's very, very professional.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks
@AmatorElektronik
@AmatorElektronik 3 года назад
Very nice job. Best from Poland.
@chandlerbing3605
@chandlerbing3605 3 года назад
You are brilliant
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks Chandler 😄
@Bartyron
@Bartyron 3 года назад
This is an amazing job. I subscribed to your channel. Very interesting. Thanks for showing!
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks
@nizedk
@nizedk 3 года назад
Absolutely fantastic work. However, I had one thought; if the traces were of very poor quality and degraded - how much of the damage was introduced from the scratch pen? Could the screen be taken of better chemically?
@tylerhoughton6206
@tylerhoughton6206 3 года назад
To be honest this is amazing ,I always thought of this media. To be once they don't work your data is toast
@hddrecoveryservices
@hddrecoveryservices 3 года назад
In some cases it would be
@jordanking6939
@jordanking6939 3 года назад
Surgery can be messy, but it gets the job done if the recovery is successful.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
In this case, only surgery like this would work. Traces were rotten before I even got the card. If I had tried to put it to NAND adapter, it would most likely not work without trace repair first.
@snark69
@snark69 3 года назад
Amazing work!
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thank you! Cheers!
@JAKOB1977
@JAKOB1977 Год назад
fascinating to see your work, but you should really mention a rough ballpark of what a given job cost what would a data recovery job like above set the customer back.?
@Nitrodr1
@Nitrodr1 2 года назад
Just Awesome work!
@dimesgamer
@dimesgamer 3 года назад
I once had found a micro sd card that was on the place where a car crash had happened there was a lot of glass then i lost it on the same place then i found it again (IT WAS IN GRASS) then brought it home then after a year or so i pluged it into my radio (it was bended) then nothing happened i tried unbending it and accidentaly broke it in half so that was sad i could left it and then brought it to fix.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
If it was bent then it's not recoverable. Crystal is damaged.
@dimesgamer
@dimesgamer 3 года назад
@@hddrecoveryservices ohh
@hightttech
@hightttech 3 года назад
Video WELL DONE -- felt very continuous, not choppy. If the card was in use, then became non-op one day, which trace failed at that moment? All 16 traces did not fail simultaneously. We know trace repair revived card, so trace failure definitely the problem. Perhaps the process of removing mask to expose traces also damaged them?? Thoughts.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
I do 2-3 cards every day using the same pen. Its safe for traces. Quality of the build and heat. Video does not show it, but once the repair was done the card worked, but it did not work like new (simply card reader and mount would not make it happen).
@hightttech
@hightttech 3 года назад
@@hddrecoveryservices: Is that pen good for removing mask? What is it? My perception of PNY is "cheapo" -- does that match your experience? Is PNY more vulnerable to "heat and quality of build" failures, in your experience?
@technicmoney1466
@technicmoney1466 3 года назад
Highly appreciated!!
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks
@MagDag_
@MagDag_ 3 года назад
Good job! Looking for some course type of lessons how to repair.
@danielpetersen2147
@danielpetersen2147 3 года назад
Hi Erkin. Sorry if you've answered this elsewhere, but where do you get that little fiberglass(?) scraper for scraping off the solder mask? Thanks!
@awilliams1701
@awilliams1701 3 года назад
holy crap that was insane. That really is bizzare it got that messed up.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Since this episode I started to pay more attention to the circuit and testing prior to diving in for NAND protocol access. Really opened up my eyes at potential issues
@j7ndominica051
@j7ndominica051 Год назад
Where did the wires go that were applied in the corner during the initial probing for continuity? That corner is later shown dicolored blue but without wires.
@gblargg
@gblargg 2 года назад
Nanosoldering? This is on a different level than microsoldering.
@obelixer9751
@obelixer9751 3 года назад
Interesting stuff!, Did some work on a phone where the digitizer connector was broken off the pcb.. Working on such small items with a microscope is really tiresome.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Its fun
3 года назад
It was card with autodestruction 😉
@deathtrap1976
@deathtrap1976 3 года назад
Self-destructive cards with and expiring date this far.
@craig7350
@craig7350 4 месяца назад
Somehow the traces got damaged under the plastic housing, But scratching off the hard coating with an abrasive fibreglass scratch pen didn't do any damage. hmmm.
@hddrecoveryservices
@hddrecoveryservices 4 месяца назад
Following your logic, I must have damaged it by clearing off the coat, right? But let me ask you this, why would the card be sent to us for data recovery then?
@craig7350
@craig7350 4 месяца назад
@@hddrecoveryservices I can see one trace maybe damaged externally, thats plausible. Possible the one at the top..
@atoz2350
@atoz2350 3 года назад
Great work
@TheEkoTube
@TheEkoTube 3 года назад
verry good work... you promised ssd recovery a very long time ago yet i`ve watched each and every single video you uploaded so far and only usb devices and cards and hdds... c`mon...give us some ssds
@hddrecoveryservices
@hddrecoveryservices 3 года назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8a5Uvj5ibWI.html here is one :) I got a NVMe video in the works with PC3K portable that I just got. Soon my friend!
@TheEkoTube
@TheEkoTube 3 года назад
@@hddrecoveryservices that is still a USB device... Not much different than a flash drive. I saw that video... About 8 times :)) Anw... I appreciate your work. It made me get in to this business... I'm not as advanced but I saved some drives over time. If I ever end up in canada, you will definitely receive my cv!
@sweetpeaz61
@sweetpeaz61 3 года назад
Oh man...thats amazing work, well done :)
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Thanks a lot!
@osergipano6377
@osergipano6377 3 года назад
you are a Peaky Blinders! very good, fantastic.
@cowboyfrankspersonalvideos8869
@cowboyfrankspersonalvideos8869 3 года назад
Wow. Of course I don't know what you charge but something like this must have been a lot. Those photos must have been important, and obviously the client didn't have a backup.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
This was priced as basic repair. Most of them are relatively easy and quick. This one was rather unusual 😃
@puckchew
@puckchew Год назад
you need to insure those hands, extremely steady only the very fine mechanism could beat 🥰😮
@MrMaxeemum
@MrMaxeemum 3 года назад
Those traces looked fine but obviously weren't, it would have been good to zoom in closer to see where the break was and to also give some idea as to what caused it. One question, would tinning the whole of card have been easier? I would have thought that because the traces looked ok that the break must have been miniscule and tinning the whole card instead of jumpers would have solved it easier. I'm not saying that would have been better as I have never worked on anything that small it's just a genuine question, Thanks.
@hddrecoveryservices
@hddrecoveryservices 3 года назад
You know I tried to tin them, but it don't seem to work
@lahcenkh3351
@lahcenkh3351 3 года назад
Where I can learn this man you are amazing
@hddrecoveryservices
@hddrecoveryservices 3 года назад
Best way to learn is to get a decent, or even good iron, and a microscope. And just practice. Micro soldering is not hard with good tools and a bit of practice
@tommyovesen
@tommyovesen 10 месяцев назад
You are a genius!
@hddrecoveryservices
@hddrecoveryservices 10 месяцев назад
thanks Tommy, this is the case I am most proud of to this day
@ravindraadapa2952
@ravindraadapa2952 3 года назад
Super sir tq for putting this video to get a good knowledge
@user-wc4oh3db9m
@user-wc4oh3db9m 3 года назад
I think this android phone had fallen severely and sd card experienced non-direct but a serious hit. Maybe some traces were broken but others got a micro cracks and after scraping the mask they finally lost connection.
Далее
Phone Data Recovery - Chip-off Recovery Method
1:14
Просмотров 16 тыс.
6 Horribly Common PCB Design Mistakes
10:40
Просмотров 193 тыс.
How To Identify An Unmarked or Blown IC Chip
32:31
Просмотров 57 тыс.
3 best data recovery hand tools of 2019
12:03
Просмотров 91 тыс.