Hey midzoo, thanks so much for this tutorial. a quick question, while charging via powerbank, i understand it only does 720 recording. but does it do motion detection 720 while charging? thank you.
After reading the instructions on the Mini Camera E-SQ11 a few times and watching the previous MidZoo video about this camera and this video. I think I've got it. 1. Press and hold the power button for about two seconds (the blue light will flash once then stay on). 2. Short press the mode button to cycle through all three modes stopping at the mode you wish to use: blue light is 720p, blue/red is 1080p, red is photo mode. 3. Short press the power button to starting recording the video, blue or blue/red light will flash for a few seconds then turn off. Note, the camera is still recording even though the light is off. In photo mode, (red light) short press the power button to take a photo. 4. To stop recording, short press the power button one time. The mode light will come on steady. 5. To turn off the camera, hold the power button for about five seconds, the mode light will flash blue 4 or 5 times and go dark.
I have a question. When it was connected to PC, I hope to use it as a PC camera. However, it always automatically shutdown in 1 minute. How can I fix this? Thank you!
I need help my camera uploaded the video and doesn't want to play it in my pc and did that yellow cable setup? I didn't get involved. I will be glad if you help me connect my camera to upload and put pictures and videos in the pc and especially the yellow cable setup I never did and I do not know how to do it. Videos are encoded in pc. In advance Thank you for your advice and help. PS: cameras have two Sports HD DV SQ11 mini DV camera full hd and SQ12 camera full HD waterproof mini dv super wide angle lens Thank you for your advice and help.
I bough a mini dv sq11 camera full HD 1920x 1080 and so far it wont record anything and the pictures was to dark when there was only one light on is that caused by the battery being low and im having po problems on the night vision mode the light from the camera didn't turn on
Hi my friend I want to ask you anything please. Why i cant play my video recorder in SQ11,I hear the voice even though on the tf card it shows that the file recordet is with AVI format? what can I do please help me?
que tal adquiri una camara sq 11, pero tengo problemas al ocuparla ya que quiero grabar y al presionar el boton on/off parpadea y al meterla a la computadora solo sale un archivo de 1 kb y no graba cual seria el detalle?, tengo una memoria micro sd de 32 gb, ya la cargue pero solo prende una luz azul/roja, no se si esa luz indique q est cargando, espero me ayudes
hey, this sq11 whats the highest gb it can take? can i go higher then 32gb? i currently have one and it only records about 20 minutes of video in 1080p mode, but i want more recording time so what should i do? i charge for 1-2 hours and still only get 20-24 mins. (i dont want to record while charging) will using a bigger gb allow me to record more? or using 720p? basically how can i utilize the full battery of 100 minutes of recording?
i just want to confirm that you can record when charging. for example, i want to set motion detect as a security cam. should i plug in the cable after starting to record or it should always be connected and powered? how would the sequence go to enable a long time motion detect?
you plug the USB cable into your pc/laptop then plug the ssecond end of the cable to the camera and search "disk drive C"(or something like that) i hope i've helped ;)
Thanks MidZoo. Here is a batch file to create the TIMERSET.txt with date inside the video when the device is connected to E:/ set hh0=%time:~0,2% set /a hh1=%hh0%+100 echo %date:~6,4%%date:~3,2%%date:~0,2%%hh1:~1,2%%time:~3,2%%time:~6,2% Y> E:/TIMERSET.txt
I did a muistake, the correct file is set hh0=%time:~0,2% set /a hh1=%hh0%+100 echo %date:~6,4%-%date:~3,2%-%date:~0,2%,%hh1:~1,2%:%time:~3,2%:%time:~6,2% Y> E:/TIMEREST.TXT
My camera only has 2 options photo mode red and 720p blue , i can´t get the purple 1080p , also the footage indoors is very low quality and very dark but for outdoors video seems ok , it is also very zoomed in , but what could i expect from a 5$ chinese mini camera
Hello, is there option to start recording in 1080 after power connected ? Im asking because i see that it starts recording only in 720 after power is connected and i wanted to use it as car dash cam in 1080 auto record 😐?
I purchased and it works video was awesome. But always one when I put the USB in it went all the way down and had to simi open it to get it out, now its not recording. Anyone having usb issues.
My camera and packing has 1080p written on it, but it does not have the 1080p mode. I think that I received the SQ11 960P instead of the SQ11 1080P. The image quality is incredibly bad.
MrKrabat You probably bought a fake clone of it. If you’re buying online for these cameras it’s hard to tell apart the real ones from the fake ones since they are identical. Some differences though are the extremely bad video quality, horrible night vision, view range from the sides is cropped, the manual’s instructions don’t really match up and it doesn’t record at 1080p, worst case scenario it doesn’t record higher than 480p. Other than that, packaging and everything else is practically the same. The real ones are usually 10-15 bucks or higher so I don’t recommend to go for anything lower than that.
ohh ok, Thank you for your answer.. but it is to save a bike route.. and its hard to record if it have to be activated each 5 minutes and also to know when it is going to stop recording.
I got an SQ11 that hung up with a blue light. Tried pushing that reset button. Nothing happened. When I opened up the camera - surprise - THERE WAS NO BUTTON AT ALL! The thing I pushed through that little hole was the microphone and nothing else. And by the way, the camera was fully charged and I used it for about five minutes to figure out how it works.
yes, connect to the pc. if it is off - the tf card will be read, if you press on/off button then it will be discovered as a web cam and you are ready to use it this way
maybe the tf card is broken? if you can operating like the video. it means your tf card have no problem. if not, maybe your mini camera is broken.or tf card broken.
I have a chromebook. When I plugged the camera with the card in it. It was read as a device and I could see the photos and video. Only problem.. chrome OS doesn't support MJPEG so I could only hear the audio. Had to convert to mp4 to see video. Its the only problem I had with the device. Otherwise works great.
Am already tired of my own I can't view anything after recording I think my SD card is bad yet I can't remove it Moreover my didn't come with that yellow cable wire 😭😭 Is so painful I wasted my money
Do not waste $16 on this . It is impossible to remember all these steps and you never know what mode you are in anyway, no way to verify. Mine went in the recycle bin.