MIG Welding: How to Make Better Welds

Подписаться 361 тыс.

Просмотров 39 тыс.

50% 1

Learn welding in my $39 online courses: courses.timwelds.com
HTP Welding Machines are some of the best I've used. They aren't the cheapest, but they may be the best value considering the quality, performance and customer service you get:
usaweld.com/?ref=timwelds
MIG Welding Gear I Use:
-Gloves: amzn.to/3vuKepi
-Welding Jacket: amzn.to/3HePyj2
-MIG Pliers: amzn.to/3tIB8Vk
-MIG Wire : amzn.to/3tMboaL
Where I buy my weld coupons (Discount Code 'timwelds' saves 10%): weldmetalsonline.com/?ref=048...
Chapters:
0:00 Welcome
0:29 Settings
4:10 Stickout
6:02 Angles
8:30 Movement
9:31 What to do
High speed welding video filmed using the Helios weld visualization system from Kron Technologies.
Welding and fabrication can be dangerous; always read the owners manuals, consult professionals licensed in your area and work safely. While I try to set a good example of safety, this video is not intended to provide sufficient instruction to safely complete metalworking projects. This description contains affiliate links that provide a commission to the channel at no additional cost to you.

Наука

Опубликовано:

7 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@gillihansmobilewelding 5 месяцев назад

"Breaking down the fundamentals" is why we all watch your channel. You have taught us all a lot. Thank you!

@TimWelds 4 месяца назад

Thank you so much!

@Hey_Its_That_Guy 5 месяцев назад

Clear, concise, relevant...what more could anyone ask for?

@TimWelds 4 месяца назад

Thank you!

@thebiglebowski5135 4 месяца назад

I started watching you 3 years ago when I was starting high school and was taking welding. After going to college I’m getting ready for my first welding job. Thank you

@TimWelds 4 месяца назад

Awesome! Congratulations!

@michaelschafer2144 4 месяца назад

I can’t thank you enough for your content. I’ve always wanted to weld. I’m an engineer and machinist but I can’t be a fabricator without the skill of welding. I’ve since bought two welders and trying to get good. Bead after bead.

@stevelauer138 3 месяца назад

as a beginner, it is so nice to hear good solid advice and also I can actually see the weld happening while you're welding. Great!!!

@GaryLiseo 4 месяца назад

Learning welding now as part of finishing up my graduate degree (STEM Education). Your method of teaching the fundamentals and “why” things are done certain ways definitely helps improve understanding, at least for me

@rbeclb 4 месяца назад

Tim is a great teacher! He saved my welding efforts with his wise counsel. I hightly recommend his courses.

@nathanielsmith441 4 месяца назад

This is really helpful, please do more videos like this! Thanks

@T3glider 5 месяцев назад

I’ve seen a demonstration of wire resistance where it is taken to an extreme. Feed out a couple of feet of mig wire and then try welding. The power in the wire is reduced so much that the wire just glows like a filament in a light bulb.

@TimWelds 4 месяца назад

I'll have to give that a try!

@Rvckyricardo 5 месяцев назад

Bro. You have taught me more than my welding instructor ❤🦾

@TimWelds 4 месяца назад

Thank you so much!

@cab8188 4 месяца назад

How about some cut and etch ? Thank you for the great video's !

@TimWelds 4 месяца назад

Thanks! I have four new etchants that I just ordered that I'm looking forward to using in some videos on a variety of materials.

@melgross 4 месяца назад

Yeah, these are very common problems. Even after 50+ years of welding I still occasionally get distracted and miss on speed and angle. It’s amazing how much concentrations is required for anyone, but particularly for beginners.

@TimWelds 4 месяца назад

Thanks Mel! I'm familiar with them because I can be the worst offender, though in some situations, you just have to do what you have to do.

@gregoryswelding 4 месяца назад

Make a tutorial on 7024 welding rods. I started welding with them a few days ago in welding class

@TimWelds 4 месяца назад

Thanks for the suggestion! They’re a great way to lay down a lot of super slick weld in a hurry.

@jamesyates5191 4 месяца назад

Your online course is great. Thanks

@TimWelds 4 месяца назад

Thank you so much!

@donaldhalls2189 4 месяца назад

Excellent information, and instructions, thank you for sharing, all the best to you and your loved ones

@TimWelds 4 месяца назад

Thank you very much!

@j.c.smithprojects 3 месяца назад

really enjoyed this tim. you explained excatly what i have ben trying to do. get better at one part, now focus on the next and so on. look forward to the next one.

@TimWelds 3 месяца назад

Thank you so much! I really appreciate it!

@calsbarn5996 3 месяца назад

Would you consider a video on setting up a mig welder for thin sheet metal something in the 18-22 gage range?

@sd04dave1 4 месяца назад

Great video! I'll keep an eye out for a similar video on stick welding

@TimWelds 4 месяца назад

Thanks! That's a great suggestion, I'm considering making one like this for each of the common processes.

@PaydayGabeBCNV 5 месяцев назад

Morning and Happy New Year 🎉 Tim and family. I have a Yeswelder 205ds and started w/.030 flux core initially. I've recently been working with .035 fc wire and noticed a significant difference between the two. The .035 on the same voltage setting runs smoother and a bit hotter causing a burn through o Once. I adjusted the voltage down a little and it works pretty good. Have you ever noticed this phenomenon as well? Remember, Its FC Wire. 🤷‍♂️ Thanks for your consideration and any reply. Cheers 🍻, G. In beautiful Boulder City Nv. USA 🇺🇲

@TimWelds 4 месяца назад

Thank you and Happy New Year to you as well! Yes, wire diameter does make a difference. Keep in mind that the wire feed speed indirectly controls the amperage, so to reduce the heat, it's best to turn down the wire speed in addition to the voltage. A larger diameter wire results in more amps for the same wire speed.

@bruced1429 4 месяца назад

Tim, I was wondering if you could do this with spray arc and see what differences there are.

@Colorado4x4 4 месяца назад

Haven’t watched your videos in a while. Looking good man! Looks like you’ve dropped some lbs! Good for you bro!

@JohneeB 4 месяца назад

Tim I like your channel and I think your advice is really spot on and straightforward. I have a question on the speed demonstration shown at 9:18. The weld in the middle is the "right" speed, but isn't the weld too wide given the thickness of the material?

@TimWelds 4 месяца назад

Thanks! It's about a 3/16" fillet, which is on the big side for 1/8" and if you were doing a lot of length it might be worth trimming it down to save time, material and distortion. Weld sizing is complicated, and it depends on whether you're asking Tim the garage guy or Tim the engineer, but I'll crack open the can of worms a bit. The structural steel code has 2 requirements for weld size. There's a general table of minimums which is based on fabrication capability and requires fillets on 1/4" and thinner plates to be 1/8" for static and 3/16" for cyclic loading. Design for strength is also a requirement, but any way you slice those calcs, you're already covered with a weld that size, so that's really a moot point in this case. Probably somewhere between the smallest and middle would be more correct.

@6Sally5 4 месяца назад

Thanks Tim…I really enjoy your channel and learn a lot. My welder is HF Platinum 120 and so far, I only use flux core wire…can’t afford any gas yet. Two questions…I often get worm holes in my welds. I understand they come up if using shielding gas and you are too far away to get its protection, but if it’s flux core, I’d think the flux should be doing that job. Second…what is your suggestion when welding 16 ga steel to a much thicker steel…say, 1/4 or 3/8”?

@Splarkszter 4 месяца назад

Only 10k views? Your channel is really good! Hope you get more recognition.

@TimWelds 4 месяца назад

Thank you so much!

@andyb7754 5 месяцев назад

Good information, thank you.

@TimWelds 4 месяца назад

Thank you!

@JacobShepherdEngineer 4 месяца назад

I love the technique discussion. Any recommendations for finding cheap metal to practice on?

@TimWelds 4 месяца назад

Thanks! You can call around to different scrap/recycling yards. A lot of them get clean metal in and they'll sell it cheap. Also, most steel suppliers have remnants bays where they'll sell their drops at a significant discount. You can try calling fab shops to see if they'll let go of some of their drops, but that just depends on the shop. If you want precut coupons, I buy mine from weldmetalsonline or the James Lincoln foundation (Lincoln Electric) website; not the cheapest, but it is convenient.

@ethd8561 4 месяца назад

Thank you for your help Sir. Please show us how to use /how to measure and read / measuring tools for CWI exam part B. Or anyone knows the link for this please let me know. I got exam coming and I never been in this industry before.

@davegallucci9327 4 месяца назад

Thank you!

@TimWelds 4 месяца назад

You are welcome!

@autoweldandpaintingfabrication 3 месяца назад

Sir MiG welding can use to connect for heater for mig

@wilhelmbell7040 2 месяца назад

Can you do a video but with flux core

@jackdawg4579 4 месяца назад

Cheers Tim, have you done anything similar for the little gasless mig's ? Thats all I use in the world of MIG welding. They just have a dial for "thickness" which doesn't seem to be related to reality...

@TimWelds 4 месяца назад

I have made a few videos about them in the past, but none that are equivalent to this. I'm considering making one like this for each of the common processes. I would suggest running a simple experiment like I did with the voltage here to get a good feel for how the setting affects the bead.

@jackdawg4579 4 месяца назад

cheers Tim! @@TimWelds

@nilomyki 5 месяцев назад

@TimWelds - Quick question about your welding gloves: Does it have an inner cotton liner?

@TimWelds 4 месяца назад

Yeah, they do have a liner. These are the most comfortable ones I've tried. I've been sent an unbelievable amount of gloves from companies, but these Black Stallions that I bought are still my favorite for MIG.

@nilomyki 4 месяца назад

@@TimWelds Thanks a-mill for the reply. Keep up the good works.

@matttaylor1092 3 месяца назад

How do you keep your table looking so clean.

@TimWelds 2 месяца назад

It looks better on camera than in reality, but the hard coating on the Siegmund table is very effective at rejecting spatter. I also have a few plates that I weld on when I don’t need fixturing, which helps.

@cwduch 4 месяца назад

You been exercising? You’re looking more fit!

@TimWelds 4 месяца назад

Thanks! I have been, I'm down about 40 lbs from my peak and still working at it.

@JCWren 5 месяцев назад

Did you get a chance to run a chrome vanadium socket through your laser engraver?

@TimWelds 4 месяца назад

Yeah, it worked great! I uploaded a short video when I did it with the results: ru-vid.comqOChLcHpH8A

@JCWren 4 месяца назад

@@TimWeldsAwesome, thanks! I missed that because I never check the shorts (don't care for the shorts, reels, or any of the other short attention span formats).

@exarith 4 месяца назад

when you just chill at 10k jewls all day. gotta pump them numbers up

@hughconnelly6278 4 месяца назад

Tim, I struggle with being able to see the puddle. Are there lights to shine on the welding area to better illuminate it, mask settings? What are some ways to improve the welding view.

@TimWelds 4 месяца назад

From a gear perspective, make sure your lens covers are new and clean because dirt and scratches really don't help. A good quality helmet helps too, though that doesn't always mean the most expensive. Also, you can play with the shade on your helmet or try reading glasses or a cheater (magnifier) lens inside to see if that helps you focus. Head position is something else to play with. Honestly, though, for a lot of people, it's just something to learn and it's easiest to learn while padding beads on a flat plate. Once you see it, you'll see it every time, but believe me, I get the frustration.

@hughconnelly6278 4 месяца назад

thank you@@TimWelds

@ZILAwelds 5 месяцев назад

Great video ! No tik tok gun manipulation …. I agree 100%

@TimWelds 4 месяца назад

Thanks! I do a little wiggle to help my pacing, but I never leave the puddle. As good as MIG like TIG can look on some things, it's as slow as just TIG welding and there's the risk of lack of fusion, so I'd rather just TIG weld when appearance is that important.

@ianjaeger4178 5 месяцев назад

MY HITBOX 200 DOES NOT HAVE NUMBER VALUE ONLY DIAL WITH LINES AROUND THE DIAL ANY IDEA?

@stevenmurata4392 4 месяца назад

It should have a chart with wire size & steel being welded thickness to get you in the ballpark.

@TimWelds 4 месяца назад

You can experiment in the same way that I did in this video with the lines around the dial. If you're trying to hit a wire speed number from another chart, just measure the amount of wire that comes out in 6 seconds, multiply that by 10 and you'll have an approximate wire speed. (28" of wire come out in 6 seconds, your wire speed is 280 in/min at that setting)

@ianjaeger4178 4 месяца назад

@@TimWelds I got it now wow cool . Burnin dimes almost hahaha

@ianjaeger4178 5 месяцев назад

WIRE SPEED?

@TimWelds 4 месяца назад

I have a couple videos on the channel focused on MIG settings that go further in depth on wire speed. Wire speed will not only control the rate of material added, it also controls the amperage so thicker material will need more wire speed. Generally, for .030, you can take your material thickness in thousandths and go a little more than double that. (1/8" thick material=.125, so double 125 to get 250 and start a bit higher with.030" wire) For .035" wire go a little less than double. Miller and some other sites have online weld calculators that'll give a starting point as well. You can run a similar experiment to what I did with voltage changing it a bit at a time to dial it in on your welder also.

@pamcam372 13 дней назад

why does every video on the internet call MAG welding MIG? METAL ACTIVE GAS is for welding steel.

@TimWelds 13 дней назад

Because in the US, most people call all of it MIG, so MAG videos wouldn't be found as much. Gas Metal Arc Welding is a better term in my opinion because it's universal, but again most people search for MIG. I think it's a trivial distinction because they use the same equipment and have so much overlap in technique. MAG includes spray, Pulse and short arc on a variety of materials.