Тёмный

Mike Patey's FIRST Look at the E-flite Micro DRACO 800mm! 

HorizonHobbyProducts
Подписаться 102 тыс.
Просмотров 82 тыс.
50% 1

Please click "...more / Show more" for links and more information. Visit www.horizonhob... for more information on the Micro DRACO 800mm. And see more footage of Micro DRACO in action in this video: • E-flite Micro DRACO 80...
Check out Mike Patey's FIRST look at - and flight on - the all-new E-flite Micro DRACO 800mm!
Mike Patey’s undeniable passion, exceptional drive, and work ethic (Back to Work™) have led to him designing and building some of the most unique and incredible aircraft - while his infectious enthusiasm has inspired thousands of people to enjoy RC and full-scale aviation along the way! Starting with a Wilga 2000 and replacing its Lycoming O-540 piston engine with a Pratt & Whitney PT6A-28 turboprop boasting about twice the power at half the weight, then many additional modifications later, Mike proudly unveiled his “ultimate bush plane.” It could go to the same places as a Carbon Cub but climb twice as fast, reach altitudes up to 28,000 feet, and cruise cross-country at 180 MPH while carrying four people plus gear. Changes from the Wilga were so extensive that the FAA approved Mike’s redesign as an experimental exhibition aircraft. The E-flite DRACO 2.0m was equally unique and astounding, and since its release, it’s become one of the best-selling RC aircraft ever! But many pilots have asked for a smaller version that’s more convenient, easier to fly, and most importantly - is more affordable too. The Micro DRACO 800mm delivers in every way to offer the most practical and fun to fly replica for intermediate to experienced pilots yet!
More info about Mike Patey:
Mike Patey was born in Gresham, Oregon along with his twin brother Mark, numbers 5 and 6 in an 11 child family. Growing up in a low-income family, they were 15 when they launched their first business together, Deck-It, building decks for their neighbors in Orem, Utah. Before they graduated high school they had built it into a company with nearly 200 employees. Their hard work and drive led them to create additional businesses, successfully building and selling each one. Today, both continue applying their passion for work to their own businesses, Mark with Best Tugs, and Mike with EcoVap.
Mike is married to his wife Chandra and they have four children. Mike’s aviation journey began in a 1971 Cessna 172L in 2002 when both Mike and Mark had independently decided to pursue aviation. In a strange “twin moment”, on the same day both had attended airshows in different states and been inspired to pursue their pilot’s license without the other knowing. When they shared their decision by phone, they were so blown away at the coincidence of the whole thing that Mark immediately bought a used 172, and the rest is history.
Mike continues his passion of flying and aviation while balancing family, work, and community. “Our parents taught us that if you are blessed with a talent or finances you must give to others or you don’t deserve it in the first place. We were raised dirt poor but our parents gave anything we had in excess to someone who had less than us.” Mike continues to give his time, talents, and energy to search and rescue missions for local law enforcement, as well as building the aviation community through his RU-vid channel where he shares his passion. He is incredibly giving of his time and knowledge as well, often taking time away from his builds for visitors though he really just wants to get “back to work”, a phrase that has become a tagline for his channel. “Back to Work means to get after something. I use it for my life in general. It means give your all, enjoy the process, and work hard.” A mantra Mike truly lives by.
Mike holds multiple world speed records and has plans to break those records again. From drag cars to hill climbs to airplanes, Mike has always been driven to race things. He likes to build bigger, stronger, and faster aircraft, innovating new ideas and making them realities in his builds. Mike’s enthusiasm is infectious, often seen chatting with fellow aviators and giggling over new ideas or theories to improve designs, he is a huge asset to general aviation and has inspired many to pursue their dreams of flight by earning their private pilot’s license.
Learn more about, connect with, and follow Mike Patey using these links:
www.horizonhobb...
www.horizonhobb...
www.horizonhobb...
www.horizonhobb...
www.horizonhobb...
www.horizonhobb...
Follow us on Facebook, Instagram, TikTok and Twitter for more content!
/ horizonhobby
/ horizon_hobby
/ horizon.hobby
/ horizon_hobby

Опубликовано:

 

26 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 171   
@HorizonHobbyProducts
@HorizonHobbyProducts 7 месяцев назад
Please click "Read more" for links and more information. Visit www.horizonhobby.com/search?q=mdraco800 for more information on the Micro DRACO 800mm. And see more footage of Micro DRACO in action in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EqWAG0higk0.htmlsi=hfmV3XdP43kUgkni Check out Mike Patey's FIRST look at - and flight on - the all-new E-flite Micro DRACO 800mm! Mike Patey’s undeniable passion, exceptional drive, and work ethic (Back to Work) have led to him designing and building some of the most unique and incredible aircraft - while his infectious enthusiasm has inspired thousands of people to enjoy RC and full-scale aviation along the way! Starting with a Wilga 2000 and replacing its Lycoming O-540 piston engine with a Pratt & Whitney PT6A-28 turboprop boasting about twice the power at half the weight, then many additional modifications later, Mike proudly unveiled his “ultimate bush plane.” It could go to the same places as a Carbon Cub but climb twice as fast, reach altitudes up to 28,000 feet, and cruise cross-country at 180 MPH while carrying four people plus gear. Changes from the Wilga were so extensive that the FAA approved Mike’s redesign as an experimental exhibition aircraft. The E-flite DRACO 2.0m was equally unique and astounding, and since its release, it’s become one of the best-selling RC aircraft ever! But many pilots have asked for a smaller version that’s more convenient, easier to fly, and most importantly - is more affordable too. The Micro DRACO 800mm delivers in every way to offer the most practical and fun to fly replica for intermediate to experienced pilots yet! More info about Mike Patey: Mike Patey was born in Gresham, Oregon along with his twin brother Mark, numbers 5 and 6 in an 11 child family. Growing up in a low-income family, they were 15 when they launched their first business together, Deck-It, building decks for their neighbors in Orem, Utah. Before they graduated high school they had built it into a company with nearly 200 employees. Their hard work and drive led them to create additional businesses, successfully building and selling each one. Today, both continue applying their passion for work to their own businesses, Mark with Best Tugs, and Mike with EcoVap. Mike is married to his wife Chandra and they have four children. Mike’s aviation journey began in a 1971 Cessna 172L in 2002 when both Mike and Mark had independently decided to pursue aviation. In a strange “twin moment”, on the same day both had attended airshows in different states and been inspired to pursue their pilot’s license without the other knowing. When they shared their decision by phone, they were so blown away at the coincidence of the whole thing that Mark immediately bought a used 172, and the rest is history. Mike continues his passion of flying and aviation while balancing family, work, and community. “Our parents taught us that if you are blessed with a talent or finances you must give to others or you don’t deserve it in the first place. We were raised dirt poor but our parents gave anything we had in excess to someone who had less than us.” Mike continues to give his time, talents, and energy to search and rescue missions for local law enforcement, as well as building the aviation community through his RU-vid channel where he shares his passion. He is incredibly giving of his time and knowledge as well, often taking time away from his builds for visitors though he really just wants to get “back to work”, a phrase that has become a tagline for his channel. “Back to Work means to get after something. I use it for my life in general. It means give your all, enjoy the process, and work hard.” A mantra Mike truly lives by. Mike holds multiple world speed records and has plans to break those records again. From drag cars to hill climbs to airplanes, Mike has always been driven to race things. He likes to build bigger, stronger, and faster aircraft, innovating new ideas and making them realities in his builds. Mike’s enthusiasm is infectious, often seen chatting with fellow aviators and giggling over new ideas or theories to improve designs, he is a huge asset to general aviation and has inspired many to pursue their dreams of flight by earning their private pilot’s license. Learn more about, connect with, and follow Mike Patey using these links: www.horizonhobby.cc/MikePateyWebSite www.horizonhobby.cc/MikePateyRU-vid www.horizonhobby.cc/MikePateyFacebook www.horizonhobby.cc/MikePateyInstagram www.horizonhobby.cc/GripLockTies www.horizonhobby.cc/BestTugs Follow us on Facebook, Instagram, TikTok and Twitter for more content! facebook.com/HorizonHobby instagram.com/horizon_hobby/ www.tiktok.com/@horizon.hobby twitter.com/Horizon_Hobby
@HorizonHobbyProducts
@HorizonHobbyProducts 7 месяцев назад
For those who might not see this response to some of the related comments here: There is no industry standard when it comes to how terms like ultra micro, micro, mini, etc. are applied to various models. This model is larger, has more features AND more performance than UMX models....which is why we call it "Micro" and not "Ultra Micro". We believe micro models are larger than ultra micro models, yet should still be under the 250 gram weight limit set by the FAA and other organizations (which this one is). And "mini" models are larger/heavier than that: Ultra Micro < Micro < Mini Also, this model is fully factory assembled...the wing installs in seconds with one screw to make the box smaller (which reduces the amount of material used/potential waste, shipping costs, and to make it even easier to store/transport). We've done the same (made the wing removable) with the recently released UMX Conscendo (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9Pj_XjNpODo.htmlsi=345cxZ4gtXQjM9qh ), and will do that with more ultra micro and micro models in the future. But they will still be fully factory assembled otherwise!
@mhughes1160
@mhughes1160 7 месяцев назад
I’ll wait for the full size version . LoL 😂
@kanartech
@kanartech 7 месяцев назад
Am so happy for bringing the memory of DRACO. Thanks Mike for being part of the video.
@SuperSoftWater
@SuperSoftWater 7 месяцев назад
I love the easter egg of the tail of the actual Draco X in the background at the start of the video. Thank you my heart needed that I miss the airplane building!
@airgliderz
@airgliderz 7 месяцев назад
Draco cant wait to see the build, engineering, and performance . Back to work! 2024 will be a great inspiring innovative year for avaiation thnks to Mike Patey.
@GBLynden
@GBLynden 7 месяцев назад
Congrats Mike and HH! I clicked that buy button as soon as I could this morning. I also have a feeling I will be watching this video back a bunch while I wait for my UMX Draco to join the Big Draco in the hangar 👊🏻💥👊🏻
@BrianPhillipsRC
@BrianPhillipsRC 7 месяцев назад
@ 8:04 - AWESOMENESS!!! Can't wait to see Mike! Nice work guys and thanks for sharing this plane with the world!!!
@mikebird8290
@mikebird8290 7 месяцев назад
HI BRIAN HOW COOL IS THIS. LOOKING FORWARD TO WATCHING YOUR REVIEW SIR 🇬🇧🇺🇲✌🏼🤩
@payitfwdrcl6171
@payitfwdrcl6171 7 месяцев назад
Brian. Sweet! for sure. Hope all is well with you and family. 👋👍👍
@aaamodeltrainsandplanes3774
@aaamodeltrainsandplanes3774 7 месяцев назад
So awesome hope to see some new umx jets pretttyyyyy pleaseee like a 4s umx f16 :)
@briansmobile1
@briansmobile1 7 месяцев назад
I'm Pre-Ordered and paid. Now I'll have both sizes!
@robertgibbons5481
@robertgibbons5481 7 месяцев назад
So cool! I have the 2 meter Draco, and now I will need to eventually get this one just because it is so cool. LOVE IT!
@speedteamhpi
@speedteamhpi 7 месяцев назад
Nice !!! I placed my order this morning for Combo kit and some extra batteries as this one is for my wife to fly with ! This one will be much easier to transport to the field over my 2.0.
@fishingwoodworker6539
@fishingwoodworker6539 7 месяцев назад
I think @horizonhobbyproducts needs put on the spot about when they are going to make an RC Scrappy! haha
@briansmobile1
@briansmobile1 7 месяцев назад
I've been waiting for that!
@gblyndensrandomreviews
@gblyndensrandomreviews 7 месяцев назад
I cannot wait to get mine! 👊🏻💥👊🏻
@jo_rellvs..
@jo_rellvs.. 7 месяцев назад
Mike, I just wanted to thank you, for allowing us to enjoy your EPIC Build!! I watched HOURS of your video's Building 'this part' then remaking the same part, Better Still Such dedication to your field! The 2.0 was just to big for me... NOW we get the Micro... Next payday, its mine, I'm sooo Excited!!
@DronemanJoeRc
@DronemanJoeRc 7 месяцев назад
Its got the Mike Patey seal of approval👍👍👍👍👍
@AussieRCPlayground
@AussieRCPlayground 7 месяцев назад
Big 👍 from me. Almost pulled the trigger on the big one, but soon realised I didn't have the room for it. A Draco this size is definitely gonna have a spot in my hangar. And on 4S, too... That thing is gonna be a rocket!! Can't wait to get one. 👏👏👏💪😎
@murrijuana2842
@murrijuana2842 7 месяцев назад
Simp harder.
@AL-RCjunkie
@AL-RCjunkie 7 месяцев назад
Mike’s reaction is priceless! Awesome video. Can’t wait to get my Baby Draco. Draco X?!? Awesome. I’ve gotta see that. Thanks Mike! And thanks HH/Eflight!!
@FlyingPolak
@FlyingPolak 7 месяцев назад
10 year old me would have stars in his eyes seeing how far HH would come with some LEGENDARY collaborations and releases. Truly incredible work from Team Horizon! I love everything yall are doing, keep it up!
@Curious_Skeptic
@Curious_Skeptic 7 месяцев назад
Well, this is my next toy for sure! AWESOME!
@airhammer6203
@airhammer6203 7 месяцев назад
DRACO X has begun!!! Nice job HH, I really like "the little" Draco!!
@RCnerd74
@RCnerd74 7 месяцев назад
Looking forward to Draco-X build episodes😍😍😍
@wikuscombrinck512
@wikuscombrinck512 7 месяцев назад
Awesome!!! So much fun to follow this journey!!! Draco X!!!
@LimestoneCoastCustoms
@LimestoneCoastCustoms 6 месяцев назад
Congrats Mike!! 👍
@MrHansen
@MrHansen 7 месяцев назад
7:55 yes! Cannot wait for the new series of Draco X videos. Stocking up on the microwave popcorn packs and soda right now.
@gazzabyerun8152
@gazzabyerun8152 7 месяцев назад
Looking forward to seeing Draco X ! Sweet...
@mcivordawn9105
@mcivordawn9105 6 месяцев назад
Fantastic stuff…….looks so easy to fly……regards Roger (Australia)
@hashtaglobotomy2655
@hashtaglobotomy2655 7 месяцев назад
Watching this, if you ain't smiley like him... Something is wrong with you. I can only imagine how he must feel after being the inspiration for a whole rc aircraft genre. Love this.
@trainroomgary
@trainroomgary 7 месяцев назад
Yes - True - Very cool & Hi from Michigan - Flying Pilgrims RC Club. ✈
@donstephanson5614
@donstephanson5614 7 месяцев назад
Does it have reverse thrust like the big one
@VGreggUndercover
@VGreggUndercover 7 месяцев назад
Everytime see Mike happy it makes me realize I chose the right field in Aviation. Even though it's very stressful at times moments like these have a way of making you feel 12 years old again.
@Explore_RC
@Explore_RC 7 месяцев назад
What do you do?
@Explore_RC
@Explore_RC 7 месяцев назад
Looking forward to see what you are up to this year!
@PhilBender612
@PhilBender612 7 месяцев назад
I had a feeling this day would come. Awesome HH!
@Reinierbaasrc
@Reinierbaasrc 7 месяцев назад
Cool was waiting for this. I love the big one. But this you can take everywhere.
@jimerickson4754
@jimerickson4754 6 месяцев назад
"Back to work" Love it!
@eazymoneyracing
@eazymoneyracing 7 месяцев назад
Ordered mine within 5 minutes about the initial email. Look forward to seeing it!
@waldogtv5486
@waldogtv5486 7 месяцев назад
So pumped he's gonna bring the REAL Draco back to life, even better, it sounds!!!! I can't wait for those videos!!!! :)
@Faithful_Tribe
@Faithful_Tribe 7 месяцев назад
Great job guys.
@A.M.-RC
@A.M.-RC 7 месяцев назад
I was smiling the whole video, this is just so awesome 👍
@HorizonHobbyProducts
@HorizonHobbyProducts 7 месяцев назад
For those who might not see this response to some of the related comments here: There is no industry standard when it comes to how terms like ultra micro, micro, mini, etc. are applied to various models. This model is larger, has more features AND more performance than UMX models....which is why we call it "Micro" and not "Ultra Micro". We believe micro models are larger than ultra micro models, yet should still be under the 250 gram weight limit set by the FAA and other organizations (which this one is). And "mini" models are larger/heavier than that: Ultra Micro < Micro < Mini Also, this model is fully factory assembled...the wing installs in seconds with one screw to make the box smaller (which reduces the amount of material used/potential waste, shipping costs, and to make it even easier to store/transport). We've done the same (made the wing removable) with the recently released UMX Conscendo (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9Pj_XjNpODo.htmlsi=345cxZ4gtXQjM9qh ), and will do that with more ultra micro and micro models in the future. But they will still be fully factory assembled otherwise!
@BashTillBroken
@BashTillBroken 7 месяцев назад
Another great release from HH
@JoshKelson
@JoshKelson 7 месяцев назад
Hell ya! Such an awesome flying airplane!
@JC-td4gg
@JC-td4gg 7 месяцев назад
Finally you made the Micro Draco! You are going to sell a lot of these!
@AL-RCjunkie
@AL-RCjunkie 7 месяцев назад
That is friggin AWESOME! Pre-ordered 😳😮😀👍🏼
@EJ-74
@EJ-74 7 месяцев назад
Very cool, i may be able to aford this one 😁
@1hornet1
@1hornet1 7 месяцев назад
That's pretty neat Mike. I have a room full of r/c planes that I never fly anymore. I love these electric planes though.
@wapartist
@wapartist 7 месяцев назад
Oh its gonna happen.. I need one
@scottpurkess597
@scottpurkess597 7 месяцев назад
Great now I have to buy the little one too❤😂 I can't wait to get my hands on it
@rcfs835
@rcfs835 7 месяцев назад
I'm going to get myself a mini play drakeo I'm glad you guys made one a little
@billjonesnation
@billjonesnation 7 месяцев назад
Of course Mike can fly RC too. What can't he do?!
@nevillecreativitymentor
@nevillecreativitymentor 7 месяцев назад
Yeah ... but does it have REVERSE thrust!?
@peoplearecrazy1798
@peoplearecrazy1798 7 месяцев назад
Do you expect UMX’s to have retracts too? lol
@captainmichael787
@captainmichael787 7 месяцев назад
They just made one with reverse thrust it’s 600$ tho
@niladrisengupta3486
@niladrisengupta3486 7 месяцев назад
As an indian , I also wish to get these planes , but we don't have horizon hobbies here , and if I import something , a $200 product Costs us $700 due to customs and shipping. We're left out . And those of the present indigenous hobby centers went bancrupt
@smooth_ops2942
@smooth_ops2942 6 месяцев назад
Alibaba? I'm sure the Chinese will copy it...
@Lopez_rc
@Lopez_rc 7 месяцев назад
That’s what I’ve been waiting for!
@mattbellina5485
@mattbellina5485 7 месяцев назад
Freaking awesome! Ordering!
@mikebird8290
@mikebird8290 7 месяцев назад
SOON AS ON SALE IN ENGLAND ILL BE MOST DEFINITELY GETTING MYSELF ONE. THANKYOU HH🇬🇧🇺🇲✌🏼🤩
@gazza4230
@gazza4230 7 месяцев назад
I’ve ordered mine from wheelspin models Mike saying it’s in on 16 march and 4s battery coming with it, I can’t wait lol the addiction is real lol 😂
@mikebird8290
@mikebird8290 7 месяцев назад
@@gazza4230 THANKS GAZZA I CAN'T WAIT. MY NAME'S MICHAEL AND I'VE GOT A PROBLEM LOL. TAKE CARE MY FRIEND 🇬🇧✌🏼🤩
@gazza4230
@gazza4230 7 месяцев назад
@@mikebird8290 lol me too after I got the xfly f22 I said I must not buy anymore till I’ve flown a few lol when the email dropped couple days ago I just had to click that button lol 😂
@tomcoryell
@tomcoryell 7 месяцев назад
Pretty cool.
@th3s41nt
@th3s41nt 7 месяцев назад
If you guys can get horizon hobby to do a Scrappy build I think that would be the best looking R/C STOL plane. And preferably a large scale like the Draco
@AMJB100000000
@AMJB100000000 7 месяцев назад
So good to here you’re building Draco again
@BillKisel
@BillKisel 7 месяцев назад
Well, my 80th BD comes in early August... I wonder what new RC plane I should to get? 😊
@wardy89
@wardy89 7 месяцев назад
I might actually be able to afford this one!
@rmgf1005
@rmgf1005 7 месяцев назад
VERY COOL !!
@benjaminnevins5211
@benjaminnevins5211 7 месяцев назад
Definitely more affordable than the big one!
@HappyRCFlyer
@HappyRCFlyer 7 месяцев назад
4s at that size should be a fireball! 🤯🤩 Nice!
@old_coastie
@old_coastie 7 месяцев назад
So glad I watched that Vid... Baby Draco with my name on it headed to a LHS near me... old_coastie
@HorizonHobbyProducts
@HorizonHobbyProducts 7 месяцев назад
We know you're going to like this one o_c!
@biffrude4981
@biffrude4981 7 месяцев назад
Thrust reverse please 😊
@gravityfuzz
@gravityfuzz 7 месяцев назад
A micro rc Draco and a full size Draco X? Information overload. What a treat.
@Stock_RCs_suck
@Stock_RCs_suck 7 месяцев назад
HH that’s puts you back in the hot seat!! We expect a Draco X big boy!!
@nevillecreativitymentor
@nevillecreativitymentor 7 месяцев назад
Draco X ... the BAAP! (as we say it here in India !)
@jmanhuntley
@jmanhuntley 6 месяцев назад
Glad to hear Draco X is underway!! Are HH working on a Scrappy yet ?
@flynbenny
@flynbenny 7 месяцев назад
That is awesome, and it is under the stupid 250g thing. I'll have to get one!
@BrandonTran
@BrandonTran 7 месяцев назад
Great looking plane! I'll pick one up. Curious why EPS is the foam type rather than something more durable such as EPO. The parts break and dent so easily. Is it due to weight constraints? I can tell it's going to fly like a dream! I just need to not let me kids fly it hah.
@HorizonHobbyProducts
@HorizonHobbyProducts 7 месяцев назад
Here's our response to a similar comment/question on another video: "Because EPO and EPP are heavier, not as stiff AND you cannot mold in all the rivets, panel lines or other surface details at this size/scale like you can with EPS! This model would have FAR less detail, would be heavier AND not fly as well if it was EPO or EPP. And because it's so light, due to the EPS foam, it's still very durable if you crash! We will use EPO and EPP for ultra micro and micro class models when scale details and/or lighter weight matter less than durability (that's why the UMX Ultrix is EPP and the ultra micro Apprentice STOL S is EPO, yet all of our similar class scale and high-performance models are EPS)."
@215cyclone
@215cyclone 7 месяцев назад
Nice ! HH / Eflite still working on a Scrappy right ?
@1STGeneral
@1STGeneral 7 месяцев назад
Hopefully it will haul two of the rc dirt bikes and be able to charge them and power my home when the power goes out
@FarmerFpv
@FarmerFpv 7 месяцев назад
This has to be the hottest micro of 2024. It flies like a bush plane but can still do crazy aerobatics on 3s. I bet it could be hovered on 3s. So sick! I need this! As much as I love Draco I would love to see Scrappy and Turbulence made into micros too. Those two planes are my dream planes.
@motoerhead1990
@motoerhead1990 7 месяцев назад
Oh HELL YES! I WAS WATING SO LONNG FOR THAT!! And Mike looks chuffed too! He is probably taking this one into bed tonight to snuggle with it :D
@mattbellina5485
@mattbellina5485 7 месяцев назад
Thanks Horizon! When are you going to make a Scrappy??!
@garycook5125
@garycook5125 5 месяцев назад
With the mountains in the background, the aircraft appears to be the full-size aircraft.
@spinnetti
@spinnetti 6 месяцев назад
Everybody needs a shop cat!
@gatorjackrc1853
@gatorjackrc1853 7 месяцев назад
Awesomeness 👌 👏 👍
@RubyS.1
@RubyS.1 7 месяцев назад
umx draco and air tractor. So happy
@jamietyler4099
@jamietyler4099 7 месяцев назад
When are you guys making a scrappy Rc plane that’s what I want. 😊
@gazza4230
@gazza4230 6 месяцев назад
Still waiting for mine in uk 🇬🇧 was told 16 march but now saying April 6th expected supplier stock due I ordered it on 15th feb I paid for it straight away so hopefully mine will get sent out straight away as I didn’t pre order hurry up draco lol
@Purpy420
@Purpy420 7 месяцев назад
plz come out with a DRACO X rc that whould be cool
@westabadie3728
@westabadie3728 7 месяцев назад
Release a Scrappy! I have the big Draco! We need more!!!!
@nevillecreativitymentor
@nevillecreativitymentor 7 месяцев назад
NAAAH ... Dad is in heaven !!! These are siblings.
@Three7T-Design
@Three7T-Design 7 месяцев назад
I'd love to see HH make a model of Turbulence next. Scrappy is cool, but we need Mike's record breaking plane, large scale with big power.
@fireman872
@fireman872 7 месяцев назад
Mike is building a new Draco X!!!?! What!!!!!!
@StevesRC
@StevesRC 7 месяцев назад
Yaaaaaaas
@pinchflat
@pinchflat 7 месяцев назад
Can we get a micro Turbulence?
@JeffinLowerAlabama
@JeffinLowerAlabama 7 месяцев назад
Alright HH can't wait for my Mighty Draco, Jeff in LA USA
@payitfwdrcl6171
@payitfwdrcl6171 7 месяцев назад
Jeff. This one is going to be a big hit. Now all HH needs to do is come out with a V2 of its bigger brother. 😉
@JeffinLowerAlabama
@JeffinLowerAlabama 7 месяцев назад
@@payitfwdrcl6171 Adam said on the 2.m Dracos being sold now they have an upgraded landing gear, stronger carbon and a gator'ing proof dash.
@payitfwdrcl6171
@payitfwdrcl6171 7 месяцев назад
@@JeffinLowerAlabama Sweet! I have the new dash but not seen the improved gear. I modded mine myself. Glad to hear that HH has took notice and made these improvements. Kudos to them for that. 👍👍
@mikebird8290
@mikebird8290 7 месяцев назад
HI JEFF HOW COOL IS THIS. DEFINITELY BE GETTING MYSELF 1. TAKE CARE MY FRIEND 🇬🇧🇺🇲✌🏼🤩
@mikebird8290
@mikebird8290 7 месяцев назад
​@@payitfwdrcl6171 HI BRAD HOW COOL IS THIS AND IF CORRECT 200 NOT BAD. TAKE CARE SIR 🇬🇧🇺🇲✌🏼🤩
@c_schelli96
@c_schelli96 7 месяцев назад
DID WE SEE A GLIMPSE OF DRACO X?????? 0:21 look at the right edge of the video: the grey-blue tail really looks like a Wilga tail!!!?
@kelloggair
@kelloggair 7 месяцев назад
He bought 2 wilgas to build draco x a white and ble as well as a green. I think the airframe skeleton might be draco x
@ianhawkins7387
@ianhawkins7387 7 месяцев назад
Can we have a Scrappy then we could have a miniature Mike Patey fleet
@moleisrich1
@moleisrich1 7 месяцев назад
Sweeet Draco is back. I have a lot of umx planes…oh boy my wife is going to kill me
@KonstantinosStefanatos
@KonstantinosStefanatos 7 месяцев назад
Is there a bike mounted under the left wing of the real plane? If only there were a fishing boat mounted under the other wing then this is the best project ever build.
@Thankful_n_Grateful
@Thankful_n_Grateful 7 месяцев назад
Is it easy to fly for beginners who have some experience flying RC? I've Flown Slow Stick, Flying Wing & BNF Small Collective Pitched Helicopters... It's been maybe 10 yrs since Touched RC... This looks like easy plane to fly... Can it be launched by hand as opposed to taking off from ground?
@HorizonHobbyProducts
@HorizonHobbyProducts 7 месяцев назад
Yes, it can be hand launched easily! And based on your experience you will likely have no issues flying it. Here is what we say officially about the skill level for Micro DRACO: Skill Level 2 - Some Experience Required Skill Level 2 aircraft, like this one, are suitable for RC pilots with some experience and the skills to assemble and/or set up and fly similar class models. Although this is the easiest to fly DRACO model yet, it's not a suitable first-ever RC aircraft for new pilots or a “next step after a trainer” model for low-time RC pilots. You should have the experience and skills necessary to successfully fly higher performance ultra-micro models like the various UMX Timber models or larger models like the Slow Ultra Stick 1.2m, Valiant 1.3m, Turbo Timber Evolution 1.5m, or other similar class models before attempting to fly the Micro DRACO. Are you new to flying RC (Radio Controlled) aircraft? If you are, Micro DRACO is not a suitable first-ever RC model, and we recommend learning to fly with one of our purpose-built trainer aircraft, such as the HobbyZone Carbon Cub S 2 1.3m. Based on the Carbon Cub Mike's wife, Chandra Patey, used to fly, it's equipped with exclusive and innovative SAFE technology that makes it possible for almost anyone to learn to fly successfully! The Ready-To-Fly (RTF) Basic version includes nearly everything needed to fly (except for a compatible LiPo battery and charger that are sold separately or together in a money-saving Powerstage bundle) and is a perfect choice if you're a new RC pilot.
@17madracki17
@17madracki17 7 месяцев назад
Id say you did well if you got Mr Mike that excited
@wingtipsworld5909
@wingtipsworld5909 7 месяцев назад
so absolutely no info on the bigger version there? is it electric or a turbine build? is it display only or will it be available? Really kind of disappointed you didnt even talk about it sitting right there on the table..........
@HorizonHobbyProducts
@HorizonHobbyProducts 7 месяцев назад
The larger E-flite DRACO 2.0m has been out for almost three years now. There's tons of information available for it, including in the many videos on this playlist: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2U0if2nYsKI.html
@This-guy-is-Crazy0123
@This-guy-is-Crazy0123 7 месяцев назад
Would it be out of the question to consider building an EDF that no one has created? You have a bunch of Timbers so why not create a bunch of Experimental aircraft that never were anything but experimental? Su-47 Burkut Grumman X-29 Yf23 Just something to consider being that no one makes production aircraft like this. 70mm 80mm or make them twin 64s Just a thought... or maybe I am writing and am out of line for asking?
@jammar6134
@jammar6134 7 месяцев назад
Are there more micro planes with 4s like this comming?
@HorizonHobbyProducts
@HorizonHobbyProducts 7 месяцев назад
Perhaps ;)
@rhysespeace
@rhysespeace 7 месяцев назад
@@HorizonHobbyProducts Certainly wouldn't mind seeing the release of a micro Twin Timber !
@randallrozier559
@randallrozier559 7 месяцев назад
Tell us more about the real one behind you with the motorcycles hanging on the wings
@kguest2257
@kguest2257 7 месяцев назад
When is Horizon gonna make a Scrappy version??
@DimitriBisas
@DimitriBisas 7 месяцев назад
When is it aviable in Europe?
@HorizonHobbyProducts
@HorizonHobbyProducts 7 месяцев назад
Micro DRACO will be available in the EU, UK and other regions in March of 2024!
@austinrhubarb
@austinrhubarb 6 месяцев назад
Can anyone help with regards to if I can operate this with the Spektrum DX6e? I'd rather not have to spend the extra money for an NX6 if I dont need to. I'm just getting into planes and am wanting to get a Conscendo 1.5m glider and this 800mm Draco and hopefully a DX6e will happily fly them both. Any advice would be gratefully received 👍
@HorizonHobbyProducts
@HorizonHobbyProducts 6 месяцев назад
The NX6 has a 7th channel that can be very useful for more complex models that have flaps plus retracts and the option for SAFE Select as well as thrust reversing. The DX6e will work great for the Conscendo Evolution 1.5m and the Micro DRACO 800mm so you don't "need" the NX6 to fly them, but you may come up short on channels for larger and/or more complex models in the future...especially if you plan to use SAFE Select. The NX6 has a nicer feeling case with rubber grips, a rechargeable battery, WiFi for easier firmware updates, a USB port so you can connect it to a computer to use it with RealFlight, and other features over the DX6e that make it more expensive but also a better option for many people because they won't outgrow it (a lot of people outgrow the DX6e and end up having to spend more by buying an NX6 or NX8 after).
@austinrhubarb
@austinrhubarb 6 месяцев назад
@HorizonHobbyProducts ... thanks so much for the quick response. I did know about the extra features on the NX6 but unfortunately my home is so full of your cars (😀), I'll only have room for 2 planes, so I don't plan on getting anything beyond a glider (the conscendo) and a general purpose plane (the 800mm Draco). Just to check... are you saying I won't have the option of beginner mode if I get the DX6e? My local model shop offers both of these planes with the far cheaper DXS, so surely the twice as expensive DX6e would let me fly these 2 planes in Safe mode?
@scole901
@scole901 7 месяцев назад
we are waiting for the umx mig 15 in 3s please
@rockymountainboy8080
@rockymountainboy8080 4 месяца назад
Please do a cheap scrappy🙏🙏🙏🙏🙏🙏🙏🙏🙏
Далее
The AMA Club Model is Failing. Here's Why.
16:10
Просмотров 88 тыс.
Watermelon magic box! #shorts by Leisi Crazy
00:20
Просмотров 2,7 млн
E-flite® Micro DRACO (maiden flight)
4:56
This ERROR is Causing Almost All Drone Accidents!
21:42
Inside The Cockpit - P-47D Thunderbolt "Bonnie"
16:25
Watermelon magic box! #shorts by Leisi Crazy
00:20
Просмотров 2,7 млн