MileStar Burchda RX80 ebike *Unboxing & Assembly* 

Great video, my RX80 is due to arrive today and your video will be very helpful when I do the assembly! Thanks again.

I got the RX 50 and love it so much... hills are not an issue at will with this bike, only thinbg is it it is huge... its defo a man bike

Amazingly helpful vidoe...saved me so much time and consternation!!!! Thank you!!!

That front wheel has a safety washer with a tab that goes up into a hole in the fork to retain the axle if the axle nuts comes loose. I see you skipped that detail and the tab isn't located correctly. If you're assembling one of these, ensure you put the tab in the locating hole above the axle. Otherwise good job, I just did this same bike and it took about an hour, mirrors and all.

Molto bravo,video chiarissimo e ben spiegato.Saluti dall'Italia!!!

AVOID the use of them side bags or the baskets on sides , these frames are not meant to have weight loads on rear sides and the max limit for the main back rack is 25.lbs. The 2 side panels of shock absorbers are the main base of holding that rear top bar and will wiggle if weight on back over 25lbs or having weight on the rear sides. You will end up tightening the bolts from those 2 plates if ya been hauling them weight loads. Test, put 30lbs on back or on them side bags and sway the rear side to side and watch the 2 side panels of the shocks. Your view should answer this tests.

Front brakes dont work took packaging red clip off

Does it have a mid motor too? Or is the big mid area near the pedals just for looks?

should i get a air pump too? or the pump comes with bike would suffice?