Military Style Battery Terminals | 1st Gen Cummins

Подписаться 14 тыс.

Просмотров 11 тыс.

50% 1

Today I show you how to upgrade your battery terminals to these reliable and easy to work with military style battery terminals. These are awesome because the cable ends are changed to heavy duty marine grade lugs and the terminals are easy to swap out and maintain. Top it off with the covers and they look great.
Stay tuned for more videos!
Tyler,
*************************************************************************************
SUBSCRIBE:
www.youtube.co...
*************************************************************************************
SHARE THIS VIDEO LINK: • Military Style Battery...
*************************************************************************************
BUY THE ITEMS IN THIS VIDEO (AMAZON.COM):
Military Style Battery Terminals: amzn.to/32sdrmy
2/0 AWG 3/8" Stud Marine Grade Lugs: amzn.to/3qVsLlg
Marine Grade Lug Assortment: amzn.to/3qXAdfv
Marine Grade Heat Shrink: amzn.to/3GUNtam
Heat Gun: amzn.to/3G02h6q
Hydraulic Crimping Tool: amzn.to/3KI5jzC
Marine Grade Connectors: amzn.to/3AxTmYS
Insulated Heat Shrink Connector Crimping Tool: amzn.to/3Hbyg4I
Wire Stripping Tool: amzn.to/35f0KMZ
Blue Seas Bus Bar: amzn.to/3fQIOKR
Ancor Marine Grade 4AWG Cable: amzn.to/3fUmL64
Ancor Marine Grade 16AWG Red Primary Wire: amzn.to/3AxTA2a
*************************************************************************************
BUY THE ITEMS IN THIS VIDEO (AMAZON.CA):
Military Style Battery Terminals: amzn.to/3fRV79A
2/0 AWG 3/8" Stud Marine Grade Lugs: amzn.to/3nV4LMW
Marine Grade Lug Assortment: amzn.to/33LqgsV
Marine Grade Heat Shrink: amzn.to/3AvMcUT
Heat Gun: amzn.to/3GYhPJ2
Hydraulic Crimping Tool: amzn.to/3rOKwC0
Marine Grade Connectors: amzn.to/3u18oF5
Insulated Heat Shrink Connector Crimping Tool: amzn.to/3fWl0oE
Wire Stripping Tool: amzn.to/3AvHHtn
Blue Seas Bus Bar: amzn.to/3At9jPT
Ancor Marine Grade 4AWG Cable: amzn.to/345gIZq
Ancor Marine Grade 16AWG Red Primary Wire: amzn.to/3fRWmpg
**************************************************************************************
CONTACT ME:
E-Mail: tylerovens@me.com
**************************************************************************************

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@darkstarengineering8265 2 года назад

This is similar to what I'm doing on my 1990 W350. Clean and orderly circuits are worth the time and effort. Very nice looking setup there.

@OvensGarage 2 года назад

Thanks! Would love to see your install as well. Cheers.

@seangibson1221 2 года назад

Awesome job! I've been planning this update for my truck for a while. That heat shrink with the new wire and ring terminals will make sure you have a good connection for years to come. Better than original. I rewired my headlights to a relay under the hood and redid my charging system due to the bouncing voltage. Use a little dielectric grease on your final connection points for a little added protection against corrosion. Has worked great for mine.

@OvensGarage 2 года назад

Thanks! Yes, it's a bit of extra work with the heat shrink and using marine grade terminals but well worth the effort. That's one thing I still need to buy and use is a bit of dielectric grease on my connections. I like this method over soldering because I find the connections are just as strong if not stronger than soldering and saves a ton of time and hassle.

@GR40RCapri Год назад

Battery terminal cracked and blew a hole in battery 😑. 03 5.9CR. Time to fix all 4 ugly terminals! Thanks for the vid! Nice clean work 😎

@OvensGarage Год назад

Cheers thanks for watching!

@tetoc6 2 года назад

Great video, I did it to my truck. I want to give you a tip, the negative terminal must to be connected at last one. To prevent any damages if you touch chassis ground while you tight the positive terminal. And vice versa, the negative terminal must to be disconnected first to prevent any damages while disconnect the positive terminal. Regards.

@JosephAnthony-k8i 7 месяцев назад

Nice job😊

@K_Kupisch 6 месяцев назад

What size wire is the bigger black wire coming off of the positive terminal?

@BigBulletsFly 2 года назад

Thankyou

@SDS-1 2 года назад

Great job

@OvensGarage 2 года назад

Thanks@

@SDS-1 2 года назад

@@OvensGarage 🙂

@jond1536 2 года назад

one thing i suggest is get a fiber or plastic relay, that metal one get so hot that you can actually burn yourself off it. super hot. the 200 amp fiber relay works great. Oh and the pink wire ends up in a connector which leads to the start lug on the starter. I ended up using 0000 welding cable for my ground and positive to the starter. Wrapped up in that split loom with a similar battery terminal. The 0000 wire had the lugs already crimped on so that made it super easy. What wasn't easy was routing that huge wire but figured it out. my original wires were shot, the insulation was split from all the years as they were OEM from the factory (1991 pre 1991.5) also the thick wire that he said goes to the fusible link, I believe is the power wire from the alternator carrying the charge amperage 80+ amps. also at 10:46 you can see the fat wire alternator wire that goes in the loom around the firewall and besides the washer tank (or battery) to the big pole on the alternator, And a connector. That connector has the pink wire in it and it goes from the battery to the ignition switch, the back to the connector and from there it goes to the start lug on the starter. Pink from battery to connector, then from connector a brown wire to the starter. (I just did all this stuff also) Great stuff this video

@OvensGarage 2 года назад

Thanks for the tips. Glad it worked out for you. A bit confused by that pink wire because in the FSM for my 92 it says it goes back to the hazard flasher. Maybe I was reading it wrong

@mementomori2353 2 года назад

Damn, that is so clean. 🤙🏽

@OvensGarage 2 года назад

Thanks!

@losmoore3358 5 месяцев назад

Good job on those terminals. This was the first time seeing what marine grade was. Nice. Thank u.

@MrRockydee07 2 года назад

Thanks , Crimping is the best mechanical and electrical contact for the wires .

@OvensGarage 2 года назад

Agreed!

@nitrous07me 2 года назад

How’s them battery terminals holding up?

@OvensGarage 2 года назад

Great and zero issues

@PndaS2k Год назад

Awesome setup!

@OvensGarage Год назад

Thanks!

@franklogan494 2 года назад

Great Video Tyler!! Very Professional.

@OvensGarage 2 года назад

Thanks Frank!

@franklogan494 2 года назад

@@OvensGarage Your welcome Tyler.

@beaufubm5983 2 года назад

Where did you get that buss bar?

@OvensGarage 2 года назад

Blue Seas Systems bus bar. I've linked everything I used in this video in the video description. I picked mine up at my local marine shop that carries a ton of blue seas systems products.

@beaufubm5983 2 года назад

@@OvensGarage Thanks, I have a west marine near me. I am in Cumming, Ga. close to Geno’s Garage.