Milling Clio 172/182 Wilwood brake adapters on home built DIY PrintNC CNC - Start to finish

Подписаться 1,3 тыс.

Просмотров 66 тыс.

50% 1

A compilation of clips of the entire process of milling brake adapters for a Renault Clio on my home built CNC machine.
00:00 - Setting stock and probing
01:28 - Facing with BAP 300
02:10 - Roughing with 1/4" Single Flute
03:04 - Sped up roughing
04:19 - Quick look at roughed part
04:36 - Tool change to 8mm 3 flute DLC for side finish
05:44 - Side finishing
07:53 - Tool change to 90 degree chamfer bit
08:08 - Chamfering and general look at semi finished part
10:34 - A look at the CAD and printed of soft jaws
11:57 - Installing jaws and stock
13:49 - Removing back side stock with BAP 300
14:26 - Setting up part for side operations
15:06 - Boring, thread milling and chamfers

Авто/Мото

Опубликовано:

19 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@Mister_G 24 дня назад

They came out well. Love the 3D printed soft jaws - I'll have to copy that.

@TMonteiro. 2 месяца назад

Hey again man! Awesome looking part! Share feeds and speeds plz. Your side finish( from another video) worked wonders on my cnc.

@domenicnc2688 19 дней назад

I like that somebody make clio parts ❤

@Terryk105 24 дня назад

Awesome job

@addisman90 18 дней назад

This guy knows what hes at

@RustyInventions-wz6ir 2 месяца назад

Just found your channel and subscribed. Very nice work

@electronicpresentationEP3D 2 месяца назад

Dude that z axis backplate is so cool

@Beeeaned 2 месяца назад

Cheers! Just added a video with a few clips from when I made it 😎

@fred-san 2 месяца назад

Congrat's Good 'continuation'.

@jayinmi3706 Месяц назад

No pics on the car? Came out pretty clean. Nice work.

@sarahbonnet8003 2 месяца назад

Hi , really nice job ! you can be proud of yourself ! i have a couple of question , what are you using to control the CNC , Mach3 or something similar ?and where can i find the probing stuff , it look so nice do you have a link or something ? thanks

@MTFreestyler Месяц назад

Which kind of controller do you use? I'm thinking of getting one of those probes but not sure how to use them with gsender

@skydrone1980 2 месяца назад

Губки на 3д принтере, шикарная идея!

@vasyapupken Месяц назад

ага. деталь аж пляшет от радости.

@nicoloroggero3392 Месяц назад

Sache codice gbrl si utilizza per installare il xyz probe?

@PWN3TU Месяц назад

I'm just getting my own CNC set up to be able to handle aluminum and I'm curious...Did you need an indexed spindle in order to do the threading pass? If so, did you DIY that on the spindle you have or did the spindle already have that feature when you bought it?

@NewScope8 Месяц назад

You may have mixed up rigid tapping with single point thread milling. The latter does not require indexed spindle. By the way using a chamfer bit to do the threaded hole chamfering is ridiculous. With the time waiting for the bit to touch the height sensor, he would have manually deburr 10 holes already.

@eackerw85 2 месяца назад

What endmill are you using for finishing? Those sides look clean AF!!!

@Beeeaned 2 месяца назад

It's an 8mm DLC coated three flute 😎

@sidemountedracing 2 месяца назад

This is nice, like very nice, searching home built diy cnc brought me here, any more info on the cnc itself?

@sidemountedracing 2 месяца назад

Ahhh ok a bit of searching later, i find PrintNC info

@Beeeaned 2 месяца назад

Aye, fairly standard PrintNC build - The website/wiki might be a little cumbersome or out of date (I haven’t looked for a while). If you’re on Discord, drop in the PrintNC server - It’s very active with info 😎

@arbjful 25 дней назад

What CAM software are you using? The surface finish is mirror like

@Beeeaned 15 дней назад

Just Fusion360 with Post Process All to handle the tool changes.

@vasyapupken Месяц назад

14:20 - your spindle ramp up time is longer than dwell time in CNC control software. it is not good. they must be at least equal otherwise it can cause too much load on the tool at a start.

@Merdinoyt Месяц назад

Hey there, Nice work, looks great. If it possible to show us your Machine? I want build once for myself and search some functional Considerations?? Thanks and go forward with your Channel.

@Beeeaned 15 дней назад

I’m yet to do a complete video of it, it’s a pretty standard build and you can see some of it in the ball nut plate video. If you join the PrintNC discord there’s a lot of help and guidance ✌️

@LarsDunemark Месяц назад

It doesn't sound like your spindle is up to speed before it starts the cut at: 14:25, do your controller read the spindle/VFD feedback speed and wait? I have the same issue and I a change in my postprocessor in fusion to add a M0 msg at all speed changes require user input to continue the operation when the VFD is at correct speed. (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-59NlGJzJZX4.htmlsi=tO8QCZlPFgPc2PGf) Great video, looks like you got really great finish.