I’m learning a lot about my new tools just starting out in the field. Thankfully I now know to never reef hard on a electric ratchet because small internal pins and clips will snap like a twig. I am also greasing my tools every few months and that has kept them working like new. The more I can learn beforehand, the less frustration down the road.
You had to grind your torx bit like how i did that too we’re both stupid for that… i had a torx screw the whole time beside me while i was forcing shoving the bit and grinding with rotary tool to carving away the bit😆
Nice video .Need your help my white lights stay on draining my battery...im not taking about my red light the battery light indicator .do you know what can be the problem?
Hey Mike, go to ereplacementsparts.com and search for model 245720 for the 3/8” m12 or 245620 for the 1/4” m12 (they should be the same, but just in case) That shows the entire breakdown. The anvil isn’t complicated, just a bunch of tiny parts.
Do you have a spare battery to test with? Is the battery or tool getting hot? I’m sure you’ve checked, but make sure the terminals are clean on the battery and inside the tool. Could also check the soldered connections between the terminals and switch.
Sorry for the late late late response. Looks like it may be 22 uf, says 16070H, 35V. That’s what I can read on the side of it. I don’t have a method to test it.