Milwaukee M18 BPD GEN2 drill went up in smoke Tear down video

Подписаться 12 тыс.

Просмотров 27 тыс.

50% 1

Milwaukee M18 BPD GEN2 went up in smoke Tear down video armature cooked its self
Help support the channel by becoming a patron @ www.patreon.co...
And find me on social media @ / oneupthesleeve
and search one_up_the_sleeve_brad on Instagram
Thanks for watching

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 53

@fatherfirefighter7751 5 лет назад

5 year warranty

@SuperMurrayb 5 лет назад

This video is interesting and informative. It looks like you have found the weakest link for this model, the cooling fan. The fan should have been made out of metal just like the ones used in most power tools made for over a century. Many plastics become brittle with age and the type used in this drill is clearly inadequate for cooling the motor over the long term. This obvious blunder is 100% the fault of the manufacturer but I wonder if it was a mistake. It could be done on purpose and something like the Phoebus Cartel is operating again.

@Oneupthesleevecustoms 5 лет назад

Sadly there are weak points. My question is is it designed to fail?

@davidperry4013 Год назад

In brushless tools, plastic fans are adequate since the heat builds up on the stator windings instead of the rotor. Also they run cooler too.

@SuperMurrayb Год назад

@@davidperry4013 This tool has four brushes and if the fan was metal it would probably still be working. The brushless tools may run cooler but their weak point is the MOSFET switches. It costs so much to fix a brushless tool out of warranty that it usually doesn't make sense to repair them. There is not much made these days are built to last for more than a few years.

@Bigitaly57 7 лет назад

I love milwaukee power tools.

@Oneupthesleevecustoms 7 лет назад

+Herr Goebbels there amazing i push mine so hard and they come back for more

@gasperajdnik5627 4 года назад

I love milwaukee power tools as well. I have them all 👍😎

@viettran-hp6pu 7 лет назад

Hi sir I live in VN i have 1 hammer drill MIlwaukee M18 2702 after 2 wekks to work it is smoke and death but on volume light on good please hepl me because it is expensive

@Oneupthesleevecustoms 7 лет назад

+viet tran if its 2 weeks old take it back under warrenty

@viettran-hp6pu 7 лет назад

i cant go to usa, i buy on ebay and no return

@LuBearr 6 лет назад

@@viettran-hp6pu then you're fucked my dude. you know you guys make a lot of good 18v stuff in vietnam eh no need to buy the milwuakee stuff for the american brandname

@JackRR15 7 лет назад

What screwdriver do you use, I have all the bits but I can't reach the screws for the bottom part, it's to deep

@Oneupthesleevecustoms 7 лет назад

+TheMidnightNarwhal i use a t10 torx full screwdriver it isnt a bit one for that reason you can buy them on ebay

@Oneupthesleevecustoms 7 лет назад

+TheMidnightNarwhal i use a t10 torx full screwdriver it isnt a bit one for that reason you can buy them on ebay

@Oneupthesleevecustoms 7 лет назад

+TheMidnightNarwhal i use a t10 torx full screwdriver it isnt a bit one for that reason you can buy them on ebay

@AndrewBrowner 6 лет назад

too late now but it is a 5 year warranty, can i ask what you were using if for when it first let the smoke fly? ive got the similar drill and impact driver kit this year brushed and ive got them pretty hot.. usually got to wear gloves to save my hands and ive clocked the impact mechanism on the driver at 106 degress C when i was using it with impact bit to drill holes in steel.. still running good though

@Oneupthesleevecustoms 6 лет назад

+Andrew Browner had no invoice for it but i was drilling 100mm hole say through hard wood 6x6 beam haha they are tuff it only died cause fan blades had previously left the building. Ive screwed in 2000 roof zip 65mm screws a day with my old impact they are bullet proof i gave mine to dad when i got a fuel one

@AndrewBrowner 6 лет назад

yeah im happy i chose milwuakee for my first set and not makita or dewalt, happy with all my current tools, had the brushed angle grinder and that thing is worthless got the fuel 5" one now and its awesome, not quite the same as a 12 amp corded but its probably more powerful than a 7/8 amp corded, got the fuel circ saw too but havent put enough miles on it for an opinion yet

@Oneupthesleevecustoms 6 лет назад

Andrew Browner you got the 9.0 amp batterys?

@AndrewBrowner 6 лет назад

i got one9ah, makes a big difference on the circ saw, i have 2 3.0s and they get hot in a hurry on that and shut down

@Oneupthesleevecustoms 6 лет назад

+Andrew Browner circ saw eats the power fast!!! Same with the brush cutter thats a good unit too

@Bigitaly57 7 лет назад

that's why I pay a little extra for brushless lol

@Oneupthesleevecustoms 7 лет назад

+Herr Goebbels yeah got brushless now i got this one 3 plus years ago can't complain thanks for watching

@offgriddreaming5403 6 лет назад

Hey mate I know your a big waulkee fan 😁 I just got one of these and an impact. Couldn't justify paying for brushed as it's just for home use. It came with 3 x 3ah batts. I should be able to revive a couple of better ones as well😉😎

@Oneupthesleevecustoms 6 лет назад

Offgrid Dreaming they are good value and still have 5 yr warranty so give them heaps mate

@Oneupthesleevecustoms 6 лет назад

Offgrid Dreaming this only failed as it had destroyed its cooling fan and i ran 120mm hole saws with it haha

@MrSuperheterodyne 6 лет назад

One Up The Sleeve Customs did this model have the Redlink protection system in it mate? Would be interested to know. 👍

@Oneupthesleevecustoms 6 лет назад

Redlink is in the batteries mate :)

@offgriddreaming5403 6 лет назад

@@Oneupthesleevecustoms Hey mate I can vouch for their warranty. I was using the impact driver. I put it on the ground, when I picked it up and started using it I got magic smoke and spitting plastic bits. I think it picked up a little stone and smashed the cooling fins. Anyway, they replaced it with a new one, so i was impressed. It's a bit of a design fault. They should mave mesh to prevent bits getting in.

@JCMDRHProductions 4 года назад

My dad's car polisher went up in smoke due to overheating or overloaded

@Oneupthesleevecustoms 4 года назад

The brushless m18 fuel.one or the m12 bps

@HDXFH 7 лет назад

Check ebay for a new motor

@Oneupthesleevecustoms 7 лет назад

+HDXFH yeah you can buy them but i got a new drill (videos here somewere

@pointedspider 4 года назад

Rewind it

@Oneupthesleevecustoms 4 года назад

Needed a fan also. Could be repaired but it had made its money that's for sure

@jtzx32024 7 лет назад

Surprised it was still running...

@Oneupthesleevecustoms 7 лет назад

+Jeffrey Tieman it did let go of the smoke

@suzesiviter6083 3 года назад

Also, those windings should be epoxied in and have a sufficient core diameter to handle the extra heat.

@Oneupthesleevecustoms 3 года назад

It didn't survive

@sr8shoota 2 года назад

Mine cuts out before it starts burning.

@Oneupthesleevecustoms 2 года назад

That's good no smoke show

@sr8shoota 2 года назад

@@Oneupthesleevecustoms yeah but the problem is it keeps cutting out. It's a full charged battery when I pull the trigger the light comes on I hear the motor try to spin. But nothing. I noticed on the trigger there is a small flex cable with a nick so I soldered it and fixed it but then i don't get nothing. With the connection broken on the flex cable there is sign of life. I will are a video

@davidperry4013 Год назад

Glad I sprung for fuel. It’s overkill for a DIYer but, worth every penny.

@Oneupthesleevecustoms Год назад

Yeah much more powah

@pointedspider 4 года назад

Turn it into a flashlight! That's what I do! Free tool! Philip's makes a track light led that operates off 12-20 VDC. Fits almost perfect

@Oneupthesleevecustoms 4 года назад

I did that with a dead m12 bluetooth speaker too

@pointedspider 4 года назад

@@Oneupthesleevecustoms damn right u did! Cuz u supposed to! U know electronics well enough to do something like that! Be good brother