Thank you very much for watching brother.Yeah, we're gonna go ahead and finish the job. I'm doing a video on it right now I'm trying to let everybody know.This is stuff.You can do and not some half a** engine builder.That's gonna charge you 5 or 6 hundred dollars for putting parts on your bike engine Ride safe
Thank you very much for watching brother. You have a happy Father's Day. I'm doing a video now. I will be finishing up on the motor and we should be cranking it up on the stand. Thank you for watching. Ride safe
Super legit set up 28▪︎of bld @23% man so much easier to do port timings using port timings after bdc great job also smart move staying around .85 mm on sqish
Right on, we need to start getting people doing their own work and not buying some engine from some half a** engine builder. That will never be able to put the detail in It that you would put on your on engine.Thanks for watching brother ride safe
Yeah, that would be nice, but I'm kind of want to keep this one. I'm wanting to build a new bike to replace the other. One frame cracked again, gas tank leaking. Just tired of messing with it and patching it by new frame. And Gemini, thanks for watching brother. And you ride safe
That was crazy how the piston was off like that. Well I found the problem with my minaralli bearings gone but crank had black chunks of varnish everywhere and painted the entire crank remember me telling you I use ethanol free gas and it's only 89 octane and for me to boost it higher I was using klots octane booster I also told you I had to coat my gas tank bicycles with tank sealer that bike with the minaralli was oldest what it was doing is eating the sealer off the tank and liquifieing it like sugar in gas tank and when burning it leaves a thick varnish in the engine I'm getting it back together we will see what happens
Yeah, that's crazy.That's still supposed to take any kind of octane booster or anything, but you'll get it back tobetter thanks for watching brother.You ride safe
Yes, indeed, Big Daddy. I enjoy building them and riding them. That's the reason I like the RC boat so much is the building of them.Thanks so much for watching.And you ride safe
I think i blew up my 80cc it blowed a head gasket put new one on it now when let clutch out it's hard to pedal will not start at all could it be rist pin bearing or crankshaft bearing something get too tight?
Sorry to hear that, brother.It could also be a wrist pin clip come out I hope it's not bad and you get it all sorted out. Thanks for watching brother ride safe
Thank you very much, brother 🙏. What bottom end did you end up using? Yep, I would love to see the master clean up the jug!!!! 🎉🎉🎉🎉🎉 crazy the amount of work you did condenced to 7 minute.
Thanks for watching bro I got the cases off of eBay for about 25 dollars. The only problem was they had 6 mm mounting bolts. You saw me drill them out and tap them to 8mm And I'm doing part 2 right now. Thanks for watching brother ride Safe I like the helmet
I really appreciate that brother. I thank you for watching. Anybody can buy an engine from a engine builder. That just slaps parts on your engine. The real satisfaction is when you build your own engine and it runs good. I'm in the process of making the video of finishing this engine.We're gonna crank it up on the stand and thank you so much for watching ride safe
