Mini Jet Boat Build - Part 1 - Jetstream 12' Buccaneer

Подписаться 121 тыс.

Просмотров 100 тыс.

50% 1

The mini jet boat project begins! In this video a 12ft Buccaneer kit made by Jet Stream Adventure Boats, is assembled!
🛠 Tools and Parts Used In This Video:
Lincoln MP 210 Welder - amzn.to/3uof5AF
Lincoln Spool Gun - amzn.to/3aieLws
YesWelder MIG 250A Pro MIG Welder- yeswelder.com/products/mig-we...
YesWelder Spool Gun - yeswelder.com/collections/wel...
Welding Clamps - amzn.to/3NIGh3V
Welding Gloves - amzn.to/3R2lxXw
👉Other Making Stuff Videos You Might Like:
YesWelder MIG PRO 250 Review - • YesWelder MIG 250 PRO ...
YesWelder MIG 270K Review - • YesWelder MIG 270K Rev...
Diy Tracked Vehicle - • Taking It For A Spin -...
Evolution Chop Saw - • Evolution 15" Metal Cu...
Cheapest Mag Drill on Amazon - • Reviewing the Cheapest...
Horizontal/Verical Band Saw - • DIY Metal Cutting Hori...
DIY Welding Cart - • Making a DIY Welding Cart
DIY Fab Table - • DIY Welding Fabricatio...
🔔 Subscribe to the Making Stuff Channel - / @makingstuff
📢 Making Stuff Patreon page - / makingstuff
🛒 Visit the Making Stuff Amazon Affiliate Store - www.amazon.com/shop/makingstuff
🌎 Vist the Making Stuff web page for more information, Plans, Merchandise and more. - www.makingstuff.info
👉Some of the links on this page are affiliate links. This means at no cost to you, a very, very small commission will be paid to Making Stuff to help cover the cost for projects like this one.
👉Thanks for watching!
(C)2022 TMI Enterprises Inc.
#makingstuff
#minijetboat
#jetboat
#jetsteareamadventureboats
#goodcontentgang

Хобби

Опубликовано:

7 июл 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 177

@MakingStuff 2 года назад

Help me name this boat! Leave your suggestions in the comments.

@abdullabud9133 Год назад

spirit boat❤️❤️❤️❤️

@MegaPoblema Год назад

Me mande o link de onde eu possa comprar esse kit sou do Brasil obrigado.

@Rinkboard Год назад

Skippy

@t2evride867 10 месяцев назад

Jet for fun

@staceymccloud6 2 месяца назад

Larry

@sixtyfiveford Год назад

FUN! This has been on my bucket list for years.

@BaxterKaleb 2 года назад

This is an awesome project. Can't wait to see it finished!

@MakingStuff Год назад

You and me both!

@andyb7754 2 года назад

Very nice and interesting project. Make sure you have a tether cord and cut off switch installed so when it throws you out of the boat it'll shut down!! LOL!! Looking forward to the next video.

@MakingStuff 2 года назад

The jet ski has that already built in and yes I will be using it. Thanks for watching!

@phynixbrd Год назад

Looking great! Making Waves

@MakingStuff Год назад

Thanks!

@jonvannatto Год назад

I'm really excited about this project!

@MakingStuff Год назад

Me too! Thanks for watching!

@DktheWelder 2 года назад

Good stuff! Cool that your doing a jet boat build!

@MakingStuff Год назад

Thanks 👍

@aarondickenson7146 Год назад

That looks like a fun project. Thanks for sharing 👍

@MakingStuff Год назад

Thanks for watching!

@rodswim492 2 года назад

Nice project Bob, I love it.

@MakingStuff 2 года назад

Thanks 👍

@BeastMode-yk5rh Год назад

"Im very happy with the way this weld turned out" lol, no im kidding, im a welder i do custom fabrication all day, and you made me feel good about my welds, awesome project man, subscribed

@MakingStuff Год назад

Thank you very much!

@MrGoosePit 2 года назад

This is going to be a great project to watch from start to finish. Can't wait to see how it turns out! Tryin' to think of a good jet boat name...

@MakingStuff Год назад

Thanks!

@LIFEbyBrandon Год назад

you're awesome brotha! this is a great build so far !

@MakingStuff Год назад

Thanks a bunch!

@allthegearnoidea6752 6 месяцев назад

My favourite bit was folding the aluminium sheet, great skills you have.

@MakingStuff 6 месяцев назад

Thank you!

@splyit 2 года назад

Great vidéo ! Very fun project !

@MakingStuff Год назад

It has been a blast to work on so far. Thanks for watching!

@djavanferreiradeandrade5627 2 года назад

This is so amazing, congratulations from Brazil....

@MakingStuff 2 года назад

Hello Brazil, thanks for watching!

@valdemirrodrigues30 Год назад

Show vc é um artista

@cn8484 5 месяцев назад

Awesome video bud. This type of content is a++++++

@MakingStuff 4 месяца назад

Glad you enjoy it!

@AmateurRedneckWorkshop 2 года назад

That is a lot of aluminum or aluminium. You are doing a great job of welding.

@MakingStuff 2 года назад

Yeah I was a little intimidated at first but practiced a bunch before actually starting on the kit.

@uibsen Год назад

Cool !!!

@marksteinwand8510 Год назад

Som’em ain’t right! -for the name. Just started my boat build yesterday! Same kit as yours but I’ve got the four seat option. Great video and good luck with the build!

@MakingStuff Год назад

Hopefully I'll be able to start on mine again soon. Sometimes life takes you a different direction than what you want to go.

@brentsmith5647 Год назад

Brilliant video thank you 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@MakingStuff Год назад

Glad you enjoyed it

@st170ish Год назад

Making Stuff is a good name...

@romiolover6852 2 года назад

Good job man you may name it Bullet.

@rceric1 2 года назад

We have nearly the same interests across the board. I’ve been eyeing a watts craft for years.

@MakingStuff Год назад

We are a rare breed. I can't find anyone around where I live that is into the same things as I am. Thanks for watching.

@tranvantin1815 10 месяцев назад

Ông nên chia sẽ kích thướt .

@terryfrymire2705 Год назад

Great Job Bob. Good ship Fartgas

@MakingStuff Год назад

Ha,Ha. How's it going in Texas?

@mohan.2230 Год назад

Sar very good ❤️ part 2 give ok

@erwinfirmansyah2065 Год назад

Mantap salam dari Bonek Surabaya Indonesia di tunggu kreasi selanjutnya bos

@OverlandTrailer Год назад

Awesome project! Boat names: Boaty McJetFace, DIY JetBy, Bob's Skip

@MakingStuff Год назад

Thanks for watching!

@johnmccanntruth 2 года назад

Should be a fun little boat. Silver streak, assuming you leave it that natural color. Maybe too easy, but should be accurate.

@bob_mosavo 2 года назад

Yeah, Silver Streak, like the train 🙃

@MakingStuff 2 года назад

I like it!

@johnmccanntruth 2 года назад

@@bob_mosavo yes, good movie!

@SystemsPlanet 2 года назад

Boat Name: MS ROCKS People who don't know you will think it's a female who rocks the boat. Don't discard your pallets. They make awesome raised beds

@MegaBCAD 2 года назад

This is going to be a awesome series you should Name it The broken bit

@MakingStuff 2 года назад

Ha that is a good name, thanks for watching!

@vanle974 Год назад

very smart guy

@pokerman9108 Год назад

Rad!

@tarekhamod7831 9 месяцев назад

❤ Love

@frankward709 Год назад

Very cool Name on the boat She's squirly Thanks for the video

@MakingStuff Год назад

Thanks for watching!

@scottcarroll4360 Год назад

JET STUFF

@abdullabud9133 Год назад

Hi 🌹❤️🌹honestly you are an amazing man. I congratulate you because you have all these ideas for creativity and useful things I suggest you call this boat (. spirit boat ) 🌹🌹

@MakingStuff Год назад

Wow, thank you

@Rebar77_real 2 года назад

That's some scary sheet(metal)!

@MakingStuff Год назад

Thanks for watching!

@michaelosullivan4112 Год назад

That is so cool but crazy fast and would you guys able able built a single man cabin boat fishing rig with outboard motor setup that be good investment on sigle man suze boats for any kind of spirts racings or fishing trips 🤞

@glbaker5595 2 года назад

I would love to see somebody take and make this boat using a Jon boat, maybe a 14-footer

@MakingStuff 2 года назад

I'm pretty sure someone has already done this on RU-vid, but yeah that would be cool too. Thanks for watching!

@georgehorman731 Год назад

Mini Nemo

@MuzzahA1 Год назад

Name- "JALO" because it's hot and everyone will want to get in it!

@CRJORDAN11 Год назад

Name for the boat "Bit broke" due to the issue with the hull profile.

@PhantomPanic 11 месяцев назад

That boat jump looked like if it had of went any more wrong it would have been a bad day

@Tapphouse 10 месяцев назад

Very cool. How many hours of welding would you say is involved to put this kit together? Also what size mig welder would I need? Appreciate any info. Thanks!

@MakingStuff 10 месяцев назад

It has taken me a year to get this far. Of course I can't work on it 8 hours a day either. The best aluminum welder I have used is the Yeswelder YWM-211P with spool gun. yeswelder.com/collections/welder-cutter/products/yeswelder-ywm-211p-double-pulse-aluminum-mig-welder?ref=makingstuff

@petervaleri8752 Год назад

Boat name NOT STOPPING I just bought my own kit from Jetstream which is the same as yours. I haven’t started building it yet but I am researching as much on RU-vid as possible. Your first video is great but I was wondering if you could just do a little bit more details on the areas that you’ve run into problems or others could run into problems if they don’t know these little hidden secrets. I’ll keep watching and thanks for video and up coming ones.

@MakingStuff Год назад

Other than the bottom not being cut correctly and the width not being 51.5 inches, I haven't had any problems.

@MegaPoblema Год назад

@@MakingStuff bom dia, vc fez um ótimo trabalho !!...sou do Brasil e gostaria de saber onde consigo comprar um kit desse aí ? Todas as chapas já vem prontas para fazer as soldas ?

@Ronnie-NE-Fishin Год назад

Not questioning since idk much about welding aluminum but I did weld doing a very similar process for about a year making sounds dampening rooms and such. My question is do you have to push your welds? With how thin the material was I was working with usually pushing the weld required either moving really quick and getting a crappy weld or drawing the weld towards you allowing for a larger tac/weld

@MakingStuff Год назад

Yes you are suppose to push the weld with aluminum.

@changethegame113 2 года назад

Name: play bouy. I know it’s gonna take some time until it’s ready to hit the water but I’d love to watch this as one big video montage start to finish, like a hour and half long. Either way I’ll still watch tho lol

@MakingStuff Год назад

Good idea, maybe I can do that. Thanks for watching!

@authentic4225 Месяц назад

What kind of wheel are you using to grind the welds flat?

@JJKILLER2015 Год назад

When's the next video coming out? I can't wait to see how this boat turns out

@MakingStuff Год назад

Soon I hope. Thanks for watching!

@danielsplayhouse3804 Год назад

I love the big project that you're doing I love watching your channel and that I do have to ask.... you're doing this great big thing pushing yes welders and my curiosity runs really hard 10 months ago you did a video with the yes welder 250p and you're talking about MIG welding aluminum now here you got this great project putting together a jet stream boat which I love but you're using a Lincoln welder with a spool gun instead of using the yeswelder with the mig gun?????? and I asked a question back when you were pushing the welder about what it can and cannot do so why would you use a Lincoln over to yes welder? and I'm not here to troll you or anything just a quick just a question why the change of heart on the boat??? I'm a long time subscriber so I'm not going nowhere..

@MakingStuff Год назад

That's a good question. The hull of the boat is 1/4 inch. Both machines are rated at 3/16" which is close enough to get the job done. The Lincoln did a better job on the 1/4" so I started out using the Lincoln on the big stuff. I did use the Yeswlder on the brace that I made in the beginning of the video. There will also be some TIG welding in this project which will involve using a Yeswelder product. There are also other advantages the Yeswelder MIG has over the Lincoln which will be shown in future videos.

@Paulman50 2 года назад

Jetboats were invented in New Zealand, so call it Kiwi 👍

@MakingStuff Год назад

LOL, thanks for watching!

@sickvic3909 Год назад

Mig Mermaid

@MonstroLab 5 месяцев назад

Im confused, was this beauty built with your YesWelder or the Lincoln welder ? Thx 🙏

@MakingStuff 5 месяцев назад

Started with the Lincoln, then switched to YesWelder when they released the YWM-211P. Had the YesWelder been available when I started the build, I would have used it for the whole thing.

@MonstroLab 5 месяцев назад

@@MakingStuff ok thanks!

@tranvantin1815 10 месяцев назад

Độ dầy tấm nhôm là bao nhiêu milimet ?

@garrettp.5018 Год назад

Do you do this whole project with an aluminum spool gun? No tig welding?

@MakingStuff Год назад

So far it's just been Spool gun.

@freza-ekb Год назад

Супер! Есть у вас DXF файл?

@mitchellanic8227 4 месяца назад

what is the correct name of the speed squares with the large flange for you to clamp onto called???

@mushroomon 8 месяцев назад

What kind an size of welding machine do u have?

@sobrevivenciaoumorte Год назад

Are all aluminum parts the same thickness? 3/16" or are there any smaller ones?

@MakingStuff Год назад

Smallest is 1/8th inch, thickest is 1/4"

@abefroman5191 Год назад

Lazer Hawk

@SuperFlo5 Год назад

What welder are you using? Cheers Fraser from New Zealand

@MakingStuff Год назад

I started out with a Lincoln 210MP, but switched over to the YesWelder YWM-211P. I wish I had the Yeswelder from the begining of the project. It works much better on Aluminum. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YyOiIbskFYs.html

@confirm1022 3 месяца назад

How much was that boat kit?

@eaglealnoor8891 Год назад

Can I get a map, measure this boat, so I can chop off the aluminum to make a similar boat, with my estimation?

@42Fab 2 года назад

"J.B. Welded" (jet boat)

@MakingStuff 2 года назад

Are you making fun of my welds? LOL. Thanks for watching. Did you stop making videos?

@42Fab 2 года назад

@@MakingStuff it's been slow, but haven't quit

@eaglealnoor8891 Год назад

Can I get a map, measure this boat, so I can chop off the aluminum to make a similar boat, with my estimation?

@rontidd6551 2 года назад

name... Making waves

@shootgp 2 года назад

Name it the S.S. Minnow... 😆

@shootgp 2 года назад

You don't look like the Professor, but you look like you could be one.

@MakingStuff 2 года назад

Just don't take it on a 3 hour tour, LOL.

@thichchetao8027 11 дней назад

Can you tell me the standard size?

@patricknkenge6393 11 месяцев назад

Hi Am inquiring what kind of welding machine are you using make and model?

@MakingStuff 11 месяцев назад

yeswelder.com/collections/welder-cutter/products/tig-welder-ywt-200dc?ref=makingstuff

@marcbotnope1728 2 года назад

BoatyJetBoatFace

@elizaelsobral3964 2 года назад

Boa tarde,sou aqui do Brasil quero te fazer uma pergunta qual a espessura da chapa?

@saymoncervantes3620 Год назад

Boa tarde, que eu sei a parte de baixo ele usam 1/4"(6,35mm) as laterais 1/8"(3mm) tudo chapa de aluminio 6061 t6

@mp-xt2rg 8 месяцев назад

Call it "boaty mc boat face"

@JG-kv4oi Год назад

Some assembly required 🙂

@MakingStuff Год назад

I like it. Thanks for watching!

@Pdpawlak 2 года назад

Made something

@danellison256 Год назад

What brand/model welder and spoolgun did you use?

@MakingStuff Год назад

So far it has been mostly Lincoln MP210 with Lincoln Spool Gun.

@historobb 10 месяцев назад

How much did the kit weigh?

@kentuckytrapper780 2 года назад

Looks like a river rat to me, great video.....

@MakingStuff 2 года назад

Thanks for watching!

@RMXbass Год назад

Trying to watch this with very low volume in bed with people sleeping next door, of course there had to be sirens..🙈

@archiebuckingham3935 3 месяца назад

Did you get compensation for the mistake?

@MakingStuff 3 месяца назад

Not monetarily, but yes they made up for it.

@easternoakstaxidermyoutfit7817 6 месяцев назад

Where did you order it from i need one buddy for thevrivers here near me

@MakingStuff 5 месяцев назад

www.jetstreamboats.com/

@easternoakstaxidermyoutfit7817 5 месяцев назад

@@MakingStuff thank you sir

@ukaszSkowerski 2 года назад

Call it HMS Stuff :)

@MakingStuff 2 года назад

Thanks for watching!

@foxwood67 2 года назад

Jetson

@MakingStuff Год назад

As long as it doesn't sounds like the Jetson's car, LOL. Thanks for watching!

@timloughman1952 Год назад

Maken Wake

@Manu-eq4mv Год назад

Whatz the cost of those welders bro

@MakingStuff Год назад

Lincoln - amzn.to/3uof5AF Yes Welder - yeswelder.com/products/mig-welder-250a?ref=makingstuff

@trishstefanuk5619 2 года назад

A name for your boat “ Broken Bit “ there’s a story behind the name

@MakingStuff Год назад

Good idea. I'm not done with it yet so there may be more stories, LOL.

@jims2286 7 месяцев назад

How much was the kit from Jetstream

@MakingStuff 7 месяцев назад

All of the pricing info is on their website.

@rodwilliams1722 Год назад

Alcoa maru

@user-tj8go8vq6q Год назад

how much would it cost to ask a welder for a job for a 6feet boat?

@MakingStuff 11 месяцев назад

Would probably be cheaper to just buy the hull already welded. The last I looked, Jetstream still offered fully welded hulls.

@Key_Capz_ Год назад

Shaina

@hoo3370 Год назад

Bathtub

@Luderspieler 7 месяцев назад

How much ps does it have?

@MakingStuff 7 месяцев назад

ps?

@Luderspieler 7 месяцев назад

@@MakingStuff oh sorry i meant horse power (0.7 kw)

@MakingStuff 7 месяцев назад

@@Luderspieler No probllem. It's 250HP.

@Luderspieler 7 месяцев назад

@@MakingStuff thanks

@troyrebeccaamburgey4498 Год назад

Hair Raiser

@MakingStuff Год назад

Good One!

@paulwyleciol3459 2 года назад

homunculus

@MakingStuff 2 года назад

Thanks for watching!

@nohemiulloa2618 10 месяцев назад

Quiero comprar una paga de esas la embiaran a

@middleway1885 11 месяцев назад

Boop

@bobbywinkles9424 Год назад

Broken bits

@bcstrings1 2 года назад

Stuffinater

@MakingStuff 2 года назад

Thanks for watching!

@bcstrings1 2 года назад

I’m a machinist by trade and wish I could afford to start my own shop out of work right now it’s killer to see the stuff you do keep it up for us that wish we could -- you rock man