Mini LED moving head wash review. 7 x 10W RGBW CREE LED 

Thank you for the video great review always enjoy the background music

Great vid mate likin them deffo getting a set

Nice review!

i have the same lights and they are definitely good for the price! Nice Video :)

How about a video of programing this with Dmx

Are these the Lixada lights? If so, they're currently on tomtop for £38 each.

Spot on, I got a pair not Long after asking you about these on a previous vid ( in which you highly recommended them ) would agree with you about the strobe but with a dmx controller this is not a problem they are great fixtures at great price will be getting another pair soon enough keep up the good work looking forward to your next vlog

With a basic DMX controller (obey 10) can you control rotation speed

Hello! I just got this light and everything with the settings is fine, but the motor shut off completely when it's turned upside down. Did you experience this before hanging yours? Should I just plan on keeping it upright?

What dmx controller can I use to control 4 of them

Hi. Is it possible to use Dmx and alter sound activated patterns to reduce or eliminate the strobe? Driving me mad. The for the upload

I just got the fixture and it stories much more than yours do in auto mode and sound active, is there anyway to make them act as yours did? The sound active mode is the same pattern as display mode fast also

Hello, do you know where from I can get a library profile for Martin LightJockey?

Having trouble finding ATA or soft bags to transport 4 lights, any leads?

The "dis" setting inverts the display so it can be read upside down (like when they're mounted like yours)

it looks the bollocks mate love it

Great video! Have you found anyway to keep the lights in one colour only and not change to all the others? Sometimes it would be good to just stay on one colour, I can't figure out how to do this if it is possible with these lights.

Hi there for the power on the unit can you plug it in to a standard plug on a wall?

Your video was pretty damn informative and helped me decide that I want to buy them. Quick question though. I plan on using these at shows with a dmx controller. do you have to re-program these every time you turn them on at every show? or do they stay with its previous setting before turning it off?

The 'dis' is the display, which you can turn upside down to make it easier to see when you are using them upside down!

I'm new to this but, do you need a DMX controller to get more than 2 of them to work together, or can you put 4 on a master/slave auto mode type thing?

How did these perform did they stand the test of time seeing as this video was done 2015 please

That's cool. Like the lights. Where did you get these and do you think these units are available in the States.

Hello friend, where I can get that structure to place the lights? Regards!

thx very much my friend

how do you get them to start lighting up

Hello, I might like to buy 2 almost the same on the internet, I only do very few parties and in not very big rooms, and I think the quality is sufficient for me. I don't have a DMX console and I would like to use them automatically or synchronized to the music, do you think I can connect them with a DMX cable but without a control console and program them as master/slave?... Thank you

nice little fixture me like loool iv made my own

Can it be used with the app Light Right? I so, with with manifacture profile? Thx

Any link to the bar that u mounted the lights to

How do you enable the auto sound mode without a DMX? Is it even possible? 👀

Nice.led

Great review and were did u get them from ?

Have you tried rigging these lights sideways? Do these inexpensive units still work in this configuration? Or can the pan motor only cope with being mounted 'up or down' ?

thanks for the video, i have a question, what is the configuration that you use in dmx? bless

Coooooool

Can I get link on where I can get lights from?

Hey Fearntree, found your youtube on these lightes. i just picked up 4 of these. I'm pretty much a lazy DJ... ie, I run all my lights on Sound Activate. Question, I'm using a Chauvet on/off board for 8 lights. When I turn on the lights they work awesome.. issue is, when I turn them off for a different song and such, when I turn them back on they have to go through the 'initialization' test again. Is there a way to bypass this. Sometimes this is 20 - 25 seconds into a song before the lights actually turn on and move. Do you know if there is a way to bypass this function and just make it turn on.. again, without a DMX controller. Thanks for the great video, just reinforced why i bought these lights... thanks, Jerry

How do you set the pan tilt so they don't shine "back" into mine (the djs) eyes when they are at the front of the booth? Cheers

I've just bought a pair of them for my livestream. I'm not using a DMX controller yet, I don't know what setting should I use. What would you recommend to a 100% beginner? In other words, I don't know what the heck I'm doing!!! 😂

Hi, do you know if it's possible to set a specific position of axis x-y using dmx?

Hi. Which dmx program do you use for work with those mini washers ? I have Martin Light Jockey and i can't find the options to control them ! Greatings from Croatia

Not sure if you can answer this but if you could it would be greatly appreciated. I am currently trying to program a pair of these and I cannot program them separately as in what I do to one the other will do as well. Direction, color, and so on are the same. Now I am new to dmx programing so it could just be my inexperience that has caused this result but I am curious if they can be program individually or if they will always mimic each other?

hey i have buyed 3 off them for my foodtruck.... they already installed and now i try to make some programming with a AVL miniscan 12 controller. How do you go the moving heads so fast.... I've i touch the pan our tilt fader ... they move slow (soft). I make a wave program and i've i set the speed and wait fader on fast... the moving heads make short movements like it's to fast to do the program.... i've a put down the wait and speed butten... they do the programmed wave but slow not fast.... i hope you can have me some advice grtz

you prefer this or mini spider?

another question is there no PC software that is a better alternative to DMX or is that the best way to do it?

What scanners is that?

Hai! My LED’s are turned off, but the moving head does rotate, in what part of the menu can you turn the LED’s back on?

You may have said, but...can you adjust the “intensity” to make them less bright?? Thanks, very helpful vid. :)

do you have a video on how to set up the mini quad light with dmx controller?

witch light stand do you use? thanks!

Thanks for sharing this video, great tutorial and I found it easy to understand what you on about the DMX .. I plan to Get DMX moving heads Even though I have 4 cans pars but move unless you position them..just quick question, where did you buy your truss?

What dmx controller are you using

What's the other lighting you had going with them towards the end? They looked rectangular.

As it is called the things that have them bolted so that it does not fall from where you have them located.

Is there a difference between yours and the 12 watt version?

Hola alguien sabe si se los Podra usar Colgados Boca abajo o Vertical horizontal de cualquier Manera igual ?? 🤔🤔

hey can you give me the type of threaded bolts where is de black schackle is mounted on the fixture... I want to buy two of these, but i need to hang the fixture's directly on a sealing. No extra schackles or G hook's can be used. I'm from Belguim and we have type for threaded bolts they called M and a number. I hope you can help me. Thx

How to program on a dmx

i dont know if you know now already but dis means display so you can put the display upside down

Bonjour, je voudrais peut-etre en acheter 2 quasiment les mêmes sur internet, je ne fais que très peu de soirées et dans des salles pas très grandes, et je pense que la qualité est suffisante pour moi. Je n'ai pas de console DMX et je voudrais les utiliser en automatique ou synchronisées sur la musique, pensez vous que je peux les relier avec un cable DMX mais sans console de pilotage et les programmer en maitre/esclave ?... Merci

Hi great review I have been looking at a pair of these and are these the cheap ones that are on eBay or amazon

I have the same lights, but they're max speed is about 60% of yours... Is there way to configure that?

Anyone know a store in Europe selling this? For what price?

can you make them tilt more up on sound active

Hi, what make and model are these please? Do you have an amazon or eBay link at all?

dis is to rotate the screen upside down or back to right side up

i have 3 mini led moving head and colour is not changing only blue light is ON

Can you disable the strobe?

are these the £55 jobbies? amazing value for money

If it hasn't been mentioned in the comments below already... the setting of dis in the menu is for inverting the display... so that you can read it in the upside down position.. just an FYI

Where would we be able to buy them?

How many meter far can it go?

My mini led moving head is not working properly. It only blink blue colour

Where u buy?

Like

Is the lights still working?

good,,, why upside down...

Genuine Cree?

Cómo configurar para AUDIO Rítmicas

Now, several years later I ask you: Have you had any problems with them at all, and if that is the case, how long until it started to malfunction and what was the problem?

You'd think you could turn the strobe off...

Why you have sooo big pupils 😂

Where do they state that they are "Cree LEDS? If they're Chinese, I can tell you right now... they're not!

Great review and were did u get them from ?

Great review and were did u get them from ?