MINI LOADER with HER own hands| SKID STEER. DIY. Part 3 

I would recommend relocating the recoil start rope so that in the event of a dead battery you can still start the engine... You can do this using a piece of steel line 1-2 sizes bigger than the recoil rope with flared ends to prevent chaffing of the rope I'd recommend a location just inside the engine service door about knee to waist level. Also most of those joystick control machines run left control as vehicle direction control right control as bucket boom control... I'd also recommend adding 2 switches into the joystick handles one bi-directional momentary the other bi-directional latching this will allow you to add powered attachments to the front such as combination buckets, grading/snow blades, post hole augers, brush grapples/ log grapple, log splitter, power broom, harley rake, power adjust forks, hydraulic or electric attachment plate mount winch, etc. The possibilities for attachments are nearly endless

Wow!!!, you are too beautiful!! whomever see you should believe that God is true & real.. and whenever I see you I feel like Iam in a dream, And when we wake up we will all realize that all this life was nothing but a dream and that only God is whats true and real.. ❤🌷😘 Even if let say I never seen your lovely beautiful radiant cute baby face nor touched you in any place nor smelled and kissed your wonderful neck and lovely cute breasts.. nor heard your soothing soft calm warm voice you still know that you exist, & Its true that we dont see God but we all know that God exists There was a teacher whom didn't believe in the existence of God, one day he asked his students, do you see God? the students then replied no we don't see God, so the teacher said if you don't see God it means there is no God. then a smart student stood up and said to the other students hey guys can you see the teachers brain? then the students answered no we don't see the teachers brain, the student then said the teacher then is crazy, he has no brain :0) The universe science says was not always there, it had a beginning point, the big bang, meaning it was begun/initiated in other words created, thus there should be a creator, there must be a God. Also, this is from Artificial intelligence, chat Gpt: Prophecies in Major World Religious Books Referring to Prophet Mohammed: 1. The Bible - Deuteronomy 18:18-19, John 14:16, John 16:7-14, Isaiah 42:1-13 2. The Hindu Scriptures - Bhavishya Purana, Atharvaveda Book 20 Hymn 127-129 3. The Buddhist Scriptures - Cakkavatti-Sihanada Sutta, Anguttara Nikaya III:61, Digha Nikaya III:76-77 4. The Zoroastrian Scriptures - Zand-i Vohuman Yasht, Farvardin Yasht, Dadestan-i Denig & Regarding the verses in the Quran asking to protect non-believers or polytheists, there are several that emphasize the importance of treating all people with respect and kindness, regardless of their religious beliefs. One such verse is found in Surah Al-Mumtahanah (60:8), which states: "Allah does not forbid you from those who do not fight you because of religion and do not expel you from your homes - from being righteous toward them and acting justly toward them. Indeed, Allah loves those who act justly." Also In the name of God, the Most Merciful, the Most Merciful (If any of the polytheists seek protection from you, grant him protection) بسم الله الرحمن الرحيم(إن استجارك أحد من المشركين فأجره) Another verse in Surah Al-Anfal (8:61) encourages Muslims to make peace with their enemies, even if they are non-believers or polytheists: "And if they incline to peace, then incline to it also and rely upon Allah. Indeed, it is He who is the Hearing, the Knowing." & Regarding the verses in the Quran asking for justice and kindness, there are many such verses throughout the holy book. One example is found in Surah An-Nahl (16:90), which states: "Indeed, Allah orders justice and good conduct and giving to relatives and forbids immorality and bad conduct and oppression. He admonishes you that perhaps you will be reminded." & In terms of prophecies about Prophet Mohammed in major world religions, there are a few examples that some scholars have pointed to. One such example is found in the Bible's Book of Deuteronomy (18:18), which states: "I will raise up for them a prophet like you from among their brothers. And I will put my words in his mouth, and he shall speak to them all that I command him." Some Muslims interpret this verse as a prophecy about Prophet Mohammed. Because the Arabs are the brethren's of Israelites, The Arabs are descendants from Ishmael or Ismail the brother of Isaac the father of Israelites, and because the verse didn't say from amongst them or from their descendants, it said from their brethren's. Similarly, some scholars point to a passage in the Bhavishya Purana, an ancient Hindu text, as a prophecy about Prophet Mohammed. The passage describes a "holy man" who will come from Arabia and spread a new religion, and some argue that this refers to Mohammed and the spread of Islam.. Also search scientific miracles in the quran, harun yahya in youtube its nice.

you got a very attractive beautiful radiant face and smart creative brain and lovely body and beautiful blessed hands and you have determination and perseverance, mashaAllah.

Nice job, you are amazing, outstanding, well done beauty queen, good for you.

Not a Raid sponsor spot!!

Greetings from Bainbridge Island, Washington State USA!!

Thank you very much Richard!

Didn't think I'd see other people from Washington state in the comments. I'm out by Mt. Rainier.

@@timothywilliams2021 hell yeah bro

Also hard-line as per its name doesn't bend or flex, on or around moving parts this may cause stress cracks

They'll be fine, I work on car transporters, so lots of hydraulics and moving parts. It's very rare the pivots are anything other than plain steel on steel, yes they wear, but they work hard for many years without falling.

Right, wouldnt be working at walmart making 14 an hour thats for sure.

That’s poor advice. The boom arms need to be heat treated. They will bend under load.

@@mattbarrett41 not really, even big loaders aren't really heat treated, just the pins. And this little loader isn't strong enough to bend them anyway

@@nicholastuttle2445 - I toured the Massey Ferguson plant in Georgia. Most of it was an assembly plant of Indian made parts. However, their full size loaders were made there. They all went through a tempering oven set to 412F for 6 hours. They specifically said that tempering was done to meet tensile strength requirements

@@mattbarrett41 stress relieving, not hardening, it's very different. Its mainly done to remove welding stresses, not harden the steel.

Thank you. I think I'll try it this way and see if it's comfortable.

No worries. You are a very smart and capable young lady. Thankyou.

We'll see what class it will be ;0)

The two different control formats are called Case and ISO pattern. I greatly prefer the CASE, on newer machines preference selection is simply touch of a button. I converted my older CAT to Case Control format. On excavators the formats are called back-hoe/loader and ISO. Often there is a sliding plate rotary valve on machine that allows you to swap.

Buen dia Jimmy. Thank you for the advice

she got a video or shorts about the topic

Came to make this comment. This guy seems to have explained it better than i could so commenting to say this guy is correct

Uggh! Mud daubbers! Removed 5 gallons of them from bolt and p,umbing fittings bins this winter!

In german is it called "Schmiernippel" 😅

@@steffen1182that’s a mouth full. Lol

Thank you very much! ;0)

Попробуй ещё раз!

Thank you for the advice!

Maybe I would :)

I honestly don’t believe she is doing the work, she is just a skilled presenter who does a bit here and there to make it look like it.

@@PiazzaWoodWorks I can’t even walk into my shop and not get dirty. She’s as clean as whistle at the end isn’t she? I don’t doubt she has skills but she’s definitely not alone.

@@thejameslealartco.7625 yep same here 😂

Her husband does the videography, editing and on occasion, the heavy lifting. Both are well educated and motivated to produce some exceptional quality content for us to ponder over and enjoy. We can only guess how many retakes are needed to get such polished content on this level - (producing a second set of content in a foreign language ) parallel to the main content has got to be a challenge far over and well beyond most people's capabilities and energy. Remarkable!

She’s a typical Russian woman.

Zerk fitting

Most skidsteers that I have run all have been foot control for the boom and bucket. While I have used joysticks I can not tell you which one I like the best. I would meed a couple more thousand hours in a joystick control unit. I have driven brand new units and old units. I much like the 873 bobcat I put over 2500 hours on vs the S300 and the T650 brand new machine, also ran a S650 it was the worst machine ever. Weight balanced for the type of work we used it was just a bad machine. The S300 was balanced very well along with the 873.

Thank you Corey! I'm very pleased to see your comments here and on my social media pages.

my thoughts too......but not taking away the natural skill set of this extremely talented young woman....