Mini Table Saw with Stanley SJ60 Jigsaw [woodworks] 

Thank you for letting me know. I made a mistake in translation. But I can't modify it. So I'll put your comment on the top =)

@@dekayscrafts There is only one that never does anything that never gets wrong. The installation of a table saw under table has not yet been filmed. This could be a good idea. Have a nice day.

When installing a jigsaw into this box configuration, it becomes closest to what's known as a scroll saw. It could be a low-cost substitute for a band saw. The hinged blade guide is a brilliant reuse, very well done!

I understood it as a mini table saw alternative... the title made me click on it and I love it!

감사합니다 ^^

Thank you =)

Thank you =)

abrazadera de palanca =)

Bonjour ami merci beaucoup

Thank you :-)

감사합니다~~~

Thank you for your warm comment.

Thank you =)

Thank you =)

Muuuito obrigado :)

감사합니다 ~~

Muchas gracias

감사합니다 ^^

감사합니다~ 사실 살짝 삐뚤었어요 ㅋㅋㅋ

Спасибо за хороший совет Я буду развивать больше

감사합니다~~

Thank you =)

감사합니다 ^^

Thanks =)

Muito obrigado

감사합니다 ^^

현욱님 좋은 말씀 감사합니다 ~~

Thank you =)

Спасибо!

감사합니다~~

Thank you :-)

Thanks =)

Também sou muito grato.

형은 아무때나 카톡하지 왜 ㅋㅋㅋ 옆동네 계시면서~

죄송해요 이거 오래된거라 도면이 없어요

Я живу в Сеуле, спасибо.

@@dekayscrafts Это интересно!Сеул большой, в каком районе?

Большое спасибо 👍

Unfortunately this is no drawing. I'm sorry I didn't help you. =)

There's no drawing because I made it improvised. I'm sorry I couldn't help you

감사합니다^^

저는 인터넷에서 주문해놔요 토글클램프라고 검색하면 종류별로 많이 나와요~

@@dekayscrafts 감사합니다. 행복한 주말 되세요

방금다른사람질문에서 해결했습니다.

Search for Amazon or Ebay =)

👍👍👍👍👍👍

Thank you for your concern.

@@dekayscrafts When I built my workshop a few years ago dust collection was a major concern to me and it took me three iterations to built my dust collector MK III that is in service for two years now. It has an internal diameter of 120mm although I only use 100mm pipes. Air goes through a cyclone and leaves 99% of the dust in a 0,3 m³ box. Then it goes through the 2,2 kW radial fan and then through a 1 micron folded filter that can actually hold about 10-20 liters of superfine dust and still work. It has to be cleaned after emptying the big box several times. Most of my machines are homebuilt or modified to allow for really good dust collection and I have to say: If you build the dust collection properly, on many machines you can really catch 99,9% of it. Pretty amazing. One the table saw drives me mad but I will probabaly replace it in the near future with a table/arm saw. So it will basically be a track saw on steroids which is a lot better in dust collection is you ask me. In general if there is any dust I use a P3 filter mask. Oh yeah and I have an air filter that circulates the air, too ^^ But it is not only about the lungs and cancer. It is also about overall cleanness of the workshop. I don't like dust everywhere.

조언 고맙습니다~ 마침 지적해주신 분이 있어서 며칠 후에 후드끈 싹 뽑아버렸어요~

철마 끌 입니다~~

🤭🤭🤭🤭

정확한 치수는 모르겠지만 나사 들고가서 끼워보고 샀어요~

@@dekayscrafts 근처 철물점 갔더니 안판다고 하던데 어디서 구입하셨나요?

@@user-fw6ds3pd6f 저도 철물점에서 샀어요 작은 철물점말고 좀 큰데로 가셔야 사이즈별로 있어요 가기전에 전화 해보고 가세요~

@@dekayscrafts 네~ 감사합니다!!

짧은 순정날과 긴 보쉬 목재용날 사용하고있어요 ~

@@dekayscrafts 곡선 가공을 하는데 잘 안되서요..곡선 가공 시 특별한 기술이 있나요? 쉽게 하시는거 같아서요..^.^

작업 공간은 조용한 주택가라서 제약이 많은 곳이예요~ 설명 상단에 메일로 연락 주시면 제가 연락 드리겠습니다 ^^

@@dekayscrafts 알겠습니다^^ 50대 후반에 이제 목공에 관심이 많아 김팀장님 영상 열심히 구독하고 있는데.. 문의사항이 많아서..

Thank you =)

Thank you =)

Thank you =)