No video :(

Mission Accomplished! Hydraulic Steering Done! Onboard Lifestyle ep.60

Подписаться 67 тыс.

Просмотров 44 тыс.

50% 1

On this week's episode of Onboard Lifestyle we button up the hydraulic steering on our custom 435 catamaran SV basik and set our sights on the Yanmar engines for next week...see you then!
Join our Crew:
If you are interested in helping us produce these videos then please feel free to check out our Patreon page. / onboardlifestyle
PRODUCTS & CAMERA GEAR: www.amazon.com...
We have collected some of the products we use during our refit and to make videos in our Amazon shop. If you buy any of the items from our shop or anything else on Amazon (using the link), we get a few pennies added to our cruising kitty. Thank you so much and thank you to Amazon Influencer program.
Don't forget to like us on Facebook!
/ onboardlifestyle-sv-ba...
Tip Jar:
Enjoy our videos? Want to give us a virtual high-five? Treat us to glass of rosé or whiskey on the rocks? Or pitch in on a tank of fuel? Click over to see how you can support our productions (most of the ways won’t cost you a dime):
www.paypal.com...
Check out our website! Still updating. 😜
www.onboardlife...

Опубликовано:

24 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 144

@khadijagwen 5 лет назад

Enjoy your youngest while she is sweet. The get a little older and are crazy for a while. I have a daughter who is now 36. She is a joy.

@linhgobenyt 5 лет назад

Emma is still a joy.....this is why we need to set sail now before she realizes we're "not cool" anymore and looks at us with disdain 🧐🧐😂😂

@timdick825 5 лет назад

Might want to fair-in the entry on that (2"?) tube the hydraulic lines go into at the 7:40 mark. Hydraulic lines move as they pressurrize /depressurize so that sharp edge will cut into them. Great video as always - thanks!

@OnboardLifestyle 5 лет назад

I agree with you Tim and plan to put chaff gear around the hydraulic lines near any sharp surfaces.

@seabournewolf2298 3 года назад

The hydraulic steering is one of the most common breakdowns I experience on a commercial boat. I’ve had rams pull apart (make sure you have stops to prevent over travel) hose failure is the most common problem (have spare hoses and enough oil to replace the fluid (motor oil and diesel 50/50 will work as an emergency substitute) broken linkages are also a thing (again have spares). The plastic coupling between the motor and the pump, I’ve had one beak in 30 years. I know you made a complete secondary steering system but these are the things I’d have on hand

@carlstout4546 5 лет назад

lynn the transmission bottle is designed to poor from the other side wont dribble that way. you guys are great!!!!!!!

@jonkindig425 3 года назад

Love your videos, always calm and cool throughout all of your projects. Nice to see how well you all work together, and I love your intro music. p.s. nice love bracelet Linh

@SuperJaXXas 5 лет назад

Teal you are blessed, Lynn is so damned fly! On point with everything going on, helpful and supportive with all the haps and Emma is coming up right behind her. Count your blessings Bro! Oh, your cat is pretty awesome too!

@AsphaltMaintenanceGroup 5 лет назад

Love The Parker Store. The hose will rot away long before those crimped fittings fail! After watching you drive to The Parker Store, I think your greatest challenge may be yet to come. How will you manager to build enough recline into your captains chair so that you can steer the boat from the same position that you drive your car???? Panel dim, light drive, Jesus on the dashboard. T-minus whenever it feels right......

@ascismartphone1592 5 лет назад

There's a Teal somewhere out there in the multiverse riding low in a 65 Impala.

@trialsport 5 лет назад

When pouring from a full bottle if you turn the bottle around and pour it with the opening at the top it will pour nicer with less chance of dribbles. Good job with it all.

@jeffrouse8098 3 года назад

Good to see you are using the proper hose wrenches

@brianmardon7123 5 лет назад

Teal, all taper pipe fittings require a thread sealant,if you use P.T.F.E then you leave the first two threads with NO tape.

@edrosenberger6947 5 лет назад

In my minds eye, I can see Emma flying a plane someday. You three sure make a good team!!!

@dcrahn 5 лет назад

Teal, next time let Linh know to flip the oil container over where the neck is on top and it will pour easier with no runs down the neck. That's why all the oil companies started offsetting the neck to one side many years ago. Nice job on installing the wheel Linh and Emma, even though Teal left you totally in the dark!

@AG4KN 5 лет назад

Great job Captains' Linh & Emma! First Mate Teal gets an "honorable mention" too.

@wouk1974 5 лет назад

Not going to be long now until you haul her out for sanding and painting her bottom. Guys she is starting to look like a beautiful boat and soon will be ready for your sailing adventures.

@LifeOnTheHulls 5 лет назад

Matey , you should have been a brain surgeon, incredible job in those tight spaces. As for Linh and Emma , well you are a lucky guy, having those ladies being so incredibly capable as well.

@peterbird8161 5 лет назад

As an aircraft mechanic I must say never ever use PTFE on hydraulic systems, love your channel keep up the good work

@lowellmccormick6991 5 лет назад

I love that museum. I saw my favorite plane, the Lockheed Constellation Tristar. I caught a $10 flight on one between Isla Mujeres & Cozumel in 1978. Epic old school experience.

@brianjoyce6800 5 лет назад

great job as usual so so close

@chrismcgann8448 5 лет назад

Teal you are a jack of all trades. Rainbow I am so jealous as I love, love, love airplanes. Lastly I missed seeing Compass. More Compass, Please!

@MrTruckerbob347 5 лет назад

Great video. Just noticed that your bleeder fittings are backwards always want them facing up because air will go up in a fluid system. Love your guys channel.

@jeeden 5 лет назад

That time you are sitting there on Friday morning hitting refresh at the OL youtube channel waiting for the video....

@francoisl7663 4 года назад

I don't usually like to provide input since it seems like everyone on youtube is an expert, but at 15:34 the nut you're spinning is a compression fitting. They don't require any PTFE , the ferrules mating in the conical part of the fitting create the seal. For the thread in the block that looks like NPT so it's good. I use a lot of swagelok and they're great compression fittings, Parker is prob just as good.

@kricketflyd111 5 лет назад

I used AN fitting for years and loved them.

@ThatGuyFromArizona 5 лет назад

Teal when you walk into a parts supply store you are like a kid in a candy store, and I love it!! LOL :)

@stevesheliflying 5 лет назад

Another great video, and so nice to see working rudders and a steering wheel. Great job to all of you!!

@jackneff179 5 лет назад

WOW Emma is the excact copy of her mother....a real couple of beauties.

@trumpetmano 5 лет назад

I could see you drooling over that shop Teal....LOL

@HopeOfJoe 5 лет назад

OMG !! The steering and all the components are in !!! Y.E.A.H. !!!!!!!!! ❤️❤️❤️. Great episode for sure. Emma is sure growing up. She is sooooo cute at the wheel for the thumbnail shoot !!

@waughthogwaugh3078 5 лет назад

Congrats. That a big one checked off. Great series of vids.

@mikebiron7339 5 лет назад

Nicely done, including the ladies. Can't wait to see this boat under it's own power and sailing!

@rmorris3722 3 года назад

To pour oil out of a oil bottle, outlet on top will pour evenly without a mess.

@bobrose7900 5 лет назад

Another great video! Rudders in, beautiful day - get out for a sail! Well done to you all - great team work.

@JCAJCA3 5 лет назад

Another really nice video. The Ladies did a great job on the wheel. GOD bless. JC

@harrytaylor4211 5 лет назад

I actually flew one of the airplanes in the museum, the one with red strip. If is not a Boeing I am not going. You have a team doing great job.

@LightningStorm271 5 лет назад

Love the channel. One suggest Teal......please have the wife take off her jewelry when she is put her arms and wrist into tight areas and basically when working period. Keep up the magnificent job guys.

@ernestdougherty3162 5 лет назад

Good job the rotors are done about ready to go for sail I know that makes y'all happy it has to one more job down not many more left be safe great job thumbs up

@davidp8594 5 лет назад

I see someone else mentioned the Tape on the threads. My thoughts exactly, Never use tape in hydraulic systems. Anaerobic pipe sealant or loctite if anything is needed at all.

@OnboardLifestyle 5 лет назад

I am definitely not a hydraulic expert and appreciate any constructive advice. If any of the fittings start to weep I will make the correction immediately.

@davidp8594 5 лет назад

Onboard Lifestyle Hydraulic connections are normally metal to metal. Sometimes with an O-Ring or gasket. The PTFE tape is to lubricate the threads of pipes under low pressure. The chance of a small pice of tape getting into a hydraulic orifice or valve makes it a risk in high pressure systems. It will usually get forced out by the pressures.

@johnnybarbar7435 5 лет назад

@@davidp8594 True but as long as Teal kept it off the sealing faces there will never be an issue and rudder vs water slipstream forces vs cylinder attachment point on the pivot arm and cylinder diameter dictate the max psi the system will ever see routinely. Only way to go higher in pressure is to keep cranking on the helm after max cylinder travel is reached and have a faulty bypass valve or no valve at all in the helm unit.

@andrewnims8175 5 лет назад

@@OnboardLifestyle From what I saw you did a good job.

@jackterry7664 5 лет назад

The museum of flight was amazing! Would like to go see that!

@maurolimaok 5 лет назад

Beautiful family, Beautiful video! Congrats!

@CesarGonzalez-kt7vp 5 лет назад

Steering wheel install reminds me of my first visit to the NASA Space Center Florida, staring in awe with open mouth at the engineering and complexity of building those rockets, space shuttle, etc. It's All Good! Super excited on your first Sail!!! Cheers!

@lkm5462 5 лет назад

Congrats and thanks for the museum of flight. Haven’t been there since they were in the red barn. Tell lhin that when your pouring from a container (atf) it’s easier if the container is rotated 180 degrees. Also it’s sad, in this country ,more isn’t done to educate women about the mechanical and electrical world at an early age . Excellent work and video. Also thanks for the tip on the hydraulic line shop.

@unclerob617 5 лет назад

MFCP is my competitor but they do a good job. If you can make just one stop to get a few hoses made you should consider yourself lucky! Plus, our shop is in Kent, WA so no foul no error ;)

@greg5176 5 лет назад

Great job on the wheel ladies!!

@nickgarcia7110 5 лет назад

Love watching you guys. I lovely family. I can't wait to see where all this hard work takes you when you start your jonrey/adventures.👍

@cnc75adventures49 5 лет назад

Good stuff it’s nice to see the girls involved and just happy to always help good job crew👍👍

@fisheater844 5 лет назад

So beautiful there on the lake just reminds me of Cairns and the most expensive units right on the coastline in town. They have to put up with a seaplane and helicopters taking of and landing every day with tourists going out to the islands or the reef. Love your work even in areas where only you will see, well planned and always smartly done.

@donniesenor3440 5 лет назад

Good morning Teal and Girls,great video,My concern is brass fittings with brass ferrules on plastic lines require a brass insert in the plastic line to prevent the brass ferrule from cutting into the plastic line and cause a problem when you least expect it, also they make plastic ferrules for plastic line which do not cut into the plastic line please google and research this before finishing this project, what a beautiful job you are accomplishing Have A Great Day

@Banjo-lm2wl 5 лет назад

love watching you all God bless from Australia xxx

@BAAndy-mo4rr 5 лет назад

Thanks for adding Basik gear, I look forward to receiving my order.

@trumpetmano 5 лет назад

The Museum of Flight is cool beans, My kids favorite. We were there and watched the Concord land when it came to Seattle.

@jwright650 5 лет назад

Knocking down the list, won't be long now.

@andrewb4556 5 лет назад

Hi you guys Love you're work and vlogs Australia

@bretth5012 5 лет назад

I ordered 2 shirts! Love the design! Does Emma have an interest in Aviation? Pilots are and will be in demand for years to come!

@linhgobenyt 5 лет назад

Thanks Brett! We appreciate you sooooo much! Emma loves the speed of the Blue Angels! 🤦🏻‍♀️🤦🏻‍♀️🤦🏻‍♀️ #bigtrouble

@bretth5012 5 лет назад

Linh Goben I’ve seen them perform many times! As well as the Thunderbirds!

@bobstienke178 5 лет назад

Really like your channel! Excellent progress. Your craftsmanship is outstanding! Best of any DIY I’ve seen so far, and I’ve seen quite a lot of them.

@ruperthartop7202 5 лет назад

Great team work

@kevinhornbuckle 5 лет назад

That's a great hydraulic shop.

@26snoopy82 5 лет назад

I really enjoy your RU-vid channel I always look forward to see new episodes. I like seeing your progress on your boat your cooking videos, etc.

@kevinbentley3254 5 лет назад

Love Museum of Flight. I get to go there often. Your boat is looking real nice.

@motorhomeraiz2257 5 лет назад

Muito bom seu trabalho. Parabéns. Quando pretende encerrar os trabalhos e sair para velejar?

@davidhawkins9782 5 лет назад

Hopefully one day basic n sv delos will meet.both from Seattle.

@francoisl7663 4 года назад

Pretty cool you have a Parker store there.

@markmateljan260 5 лет назад

Great episode again guys...

@MrZeddy100 5 лет назад

Three quarters of a quart? A quart of what? I think we need some metric system here. : p

@tombarker3608 5 лет назад

Definitely take that project off the board well done.

@ronbuckner8179 5 лет назад

OOOH! Bob's right! Especially White PTFE, Hydraulic fluid can break it down. A compression seal is supposed to be made on the bulb seat inside and if you want to use a teflon look for yellow, but I'd recommend Rectorseal or Loctite products.

@kz4506 5 лет назад

Maby some false floors over the rudder control arms at the bottom steps of each hull so you can stand there whence under way well done thanks

@_Akicita_ 5 лет назад

Hello Captain - Just curious if you purchased two lines for every hydraulic connection? When it comes to hydraulics I have learned to live by the "two is one - one is none" rule. Also regarding comments about Teflon tape - it is perfectly okay and acceptable in marine hydraulic applications as long as you start it a thread or two back from the end of the fitting. I have used Teflon tape on hydraulics on commercial vessels I have captained for more than 3 decades now.

@squigles_uk 5 лет назад

Well done ladies, you wanna go forwards not backwards ;-)

@ernest795 5 лет назад

Great video as always. Keep it up:)

@gfroese4799 5 лет назад

And now you can install your rudder angle indicator . Back at her .

@cyberspooky 5 лет назад

How did you get so lucky Teal ? My partner is as practical as a bag full of hammers lol 😎

@Adofri-Sailing 5 лет назад

Good job! Your house is starting to look like a boat now ;-)

@danieloliver20 5 лет назад

Hey take that boat for a sail around Union! Nice install, so how many spare parts will you fill up your spare berth? Hoses, couplings, wiring, etc.... Also is there an emergency tiller in case hydraulics breaks down? Guys, you're killing it! ⛵👍

@patraic5241 5 лет назад

Congratulations! You are a working boat again. :) One thing I noticed at 7:42 you have a shot of the lines running into a conduit. The bend there looks pretty tight, at least from that angle. The conduit edge also looks a bit sharp. You might want to consider a wrap on lines with something to prevent wear damage at that edge or at least keep a close eye on it for a while to look for rubbing once you are underway. It would not be cool to pop a line offshore someday.

@OnboardLifestyle 5 лет назад

I was waiting for this comment because when I was editing this video I could see how it was a bit misleading. I have two conduits running through that bulkhead. On the left is the engine control cables and the Yanmar wire harnesses for the control panels (they look very similar to the hydraulic hoses). On the right is insulated water leads for the galley and behind them are the hydraulic lines that have a straight shot through the conduit. On that note, I do have a few areas where I will put chaff gear on to protect the hoses from any wear.

@andrewnims8175 5 лет назад

Exciting week. When will you be testing your engines and connecting the throttles?

@Stubones999 5 лет назад

People don't realize how oil bottles are supposed to be poured, with the neck and hole at the top, not the bottom, and it will breathe better and not drip...

@mifsudryan 5 лет назад

And old guy thought me that trick when I was young! it really works better

@drmike505 5 лет назад

=I see the teflon tape issue has been well covered. Bits of teflon can detach from the fitting and migrate thru the system till it lodges itself in a direction control valve thereby jamming the spool.

@pirateracer69 5 лет назад

Hi guys.

@jacktaylor1030 5 лет назад

I was just wondering if you may have thought of sewing together some type of cover to protect the external rudder actuator components from the environment? I'm not sure what type of material would be needed to protect the Actuators from the harsh saltwater and other concerns.

@warsurplus 4 года назад

Nice job again. Is there an indicator at the helm station of where the rudder is positioned? How is the position indexed from the hydraulics and linkages?

@captainmike808 5 лет назад

Auuu right 🤙🏻

@johnnyohness 5 лет назад

All I can say is you are amazing. Everything antiseptic and sterile . You must drive the grease monkey's crazy. Looks like your boat was created in a hospital. Perfect perfect perfect. What's not to love.

@_Willem_ 4 года назад

lol...I think I'll sweat,

@eb1888. 5 лет назад

Two wrenches are recommended for tightening those fittings.

@dlavarco 5 лет назад

Awesome !!! Will the rudder linkage on the sugar scoops always be exposed like that?

@bunyipdan 5 лет назад

Great to see you got your steering sorted, not far now, a little heavy with innuendo.....probably just me

@khadijagwen 5 лет назад

The Nylock is not engaged yet. Will you have a rudder position indicator? Perhaps electronic?

@williamwallace176 5 лет назад

Can we assume you have measured the rudders to be sure they are both headed in the same direction?

@CheersWarren 5 лет назад

Hi almost any decent size town will have a hydraulic hose and parts store. They are used in numerous equipment and need replacing for all sorts of reasons . You should find , starter and alternator repair places almost as frequently as well. Love the quality of your workmanship, oh btw you should not need to use thread tape on the hose connections the cones inside do all the sealing. Cheers Warren

@sabastan2 5 лет назад

Now it starting to look like a boat again and not a barge lol.. I too saw that something was missing on the hydraulic line but many have talked about it all ready. The question i have is about the wheel. What has your thoughts what you are going to use on the end to make it easy for grip and for hand comfort while hand steering. or what was you thinking to use as a maker to show Top Dead Center on the wheel?

@grancito2 5 лет назад

Why is there an obsession with huge diameter steering wheels, with the small rudders and hydraulic steering it could use one less than 2 feet diameter, and be much more comfortable to use, and better for manoeuvring, when docking.

@mark- 5 лет назад

Nice job guys 😊👍 Will you be installing a rudder position sensor ?

@donaldkotara2714 5 лет назад

At 11:50 Do Not See a Ferrel / Compression Sleeve on end of Line

@dcrahn 5 лет назад

Yep. Without the ferrule, hydraulic pressure will push the line right out of the fitting.

@OnboardLifestyle 5 лет назад

I used a new type of compression sleeve that has the ferrel built in. As you tighten it the first time it crimps the ferrel down permanently.

@billmccurdy8944 5 лет назад

I noticed the rudder crossover steering rod was lowered where it looks like it is just below the hull profile. Was Vortex shedding considered for this Rod when a wave passes through?

@OnboardLifestyle 5 лет назад

It was lowered back to the original designed position. It was raised by a previous owner to allow for a tiller steering option that was never installed. I'm quite sure that the alternating vortices outflow of both air and water will be unnoticeable and not much of a concern. Thanks for the thought. 👍

@jtermini30 5 лет назад

Teal ,i will the cat have a back up tiller system Incase of hydraulic failure?

@jacktaylor1030 5 лет назад

Fantastic, The Rudder system completed and works as described. Y'all lucked out finding such a nice Hydraulic outfitter so close by. When I saw the Parker Store, it reminded me of the Industrial Hydraulic Technology course I attended by Parker. I worked in Flight Simulation, which used a broad array of Hydraulics in the Motion and Control Loading Systems.Which comes down to the cool part, where you went to the Field of Flight Aviation Museum. How did Emma, like her ride in the Simulator box 20:36 that rolled 360 degrees, now that looked like a ton of fun. I spent almost all of my adult life in the field of Aviation, and I'm happy to see Emma having a fondness for aviation as well. How many Big Hurdles do y'all have left before the Big Departure Day? Love Y'all.

@corradomusicstands639 5 лет назад

Teal - starboard edges still - no good - (razor blade the edges - it is very fast to do - and looks smooth and sweet......(use the razor like a wood scraper down the edge of the starboard - few passes is all it takes.....) Also - 1) quick shot of clear coat on polished brass/ bronze - lasts........ 2) make a center cap for your helm (steering wheel) from starboard - hint - proper thickness the material - use hole saws - then round edges - snap it in - lock it with a small set screw....... Best

@hoffman12100 5 лет назад

Hi You could have chromed the wheel. Made it shiny. The paint isn't going to stay on for long and it's going to show dirty hands.

@linhgobenyt 5 лет назад

We have been kicking around a new color and wrap for the wheel and will let our Patrons decide. 😜 Just so excited steering is reinstalled for the next chapter! BTW, it looks SO good right?! 👍🏻👍🏻

@jacktaylor1030 5 лет назад

After reading all of the comments, I just love all the armchair quarterbacking done on this project. Its' just basic Hydraulics, non of the stuff used in Aviation, or other High Technology uses.