Mistake Proof Your Setup with Probing - Haas Automation Tip of the Day

Подписаться 299 тыс.

Просмотров 65 тыс.

50% 1

That's right! Mark's finally back. He's been super busy with show presentations and lots of development projects here at the factory. But we finally wrestled him free to get back to making great videos!
In this TOD, Mark shows us how one simple code can open up possibilities for adding a Poka-Yoke into your program. What is that? Click play to find out!
Here are some other TOD videos relate probing your parts:
In-Process Probing
• In-Process Part Measur...
Automate with your Probe
• Automate Using Your Pr...
Display Macro Values on Main Screen
• Get the info you need ...
Don’t miss any TIP-OF-THE-DAY videos. Click here ow.ly/s28l30mTiUo to join our email list!
If you enjoyed this video, please hit the like button and share it with a friend who’ll find it helpful . . . and thanks!
Follow Haas:
Facebook: / haasautomationinc
Instagram: / haas_automation
Twitter: / haas_automation
LinkedIn: / haas-automation

Наука

Опубликовано:

4 дек 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@SuperAWaC 4 года назад

i don't care what the videos are about as long as mark is hosting them

@SneakyMcBastard 4 года назад

Good to see you back Mark, these are always a pleasure to watch.

@VictorHernandez-nt3tw 4 года назад

Lifesaver! We we're literally trying to find a way to poka yoke some of our jobs! Thanks! The dislikes in the videos must be machinist that "know everything" and "never crash"

@benjaminbenavidesiglesias52 4 года назад

That's Does not exist...

@MrCoffeypaul 4 года назад

Ah come here I know everything too lol!

@helmsplitter0233 4 года назад

We just say idiot proof. Then we laugh because they keep making better idiots haha

@metlmuncher 4 года назад

Another great vid. Thanks for taking the time to make these

@derrickmenn9667 4 года назад

Thanks Mark another great video. I am learning how to use my probe more and more. This really helps.

@Hobbylife2024 4 года назад

Welcome back Mark. Good explanation. Canada 🇨🇦

@wrighty338 4 года назад

Everything is valuable when you are learning, thanks

@madhus8373 4 года назад

Happy to see you mark 😊

@TheSouper07 4 года назад

Very helpful, thanks Mark! This is much simpler and faster than doing measuring cycles and comparing numbers to #188 to determine if part orientation is correct.

@spiritualeefeminine8075 4 года назад

Love your videos Mark!

@Emanemoston Год назад

Thanks for the video, Mark.

@annes666 4 года назад

Finally! Good video

@mtlfpv 2 года назад

Really cool

@djenii2020 10 месяцев назад

Спасибо за прекрасное обучающее видео, коллеги!

@user-wn4dx1cl3g 4 года назад

Cool idea, additional check of the workpeace)

@mexicano343 4 года назад

I would like to work on your machines someday, you are incredibly creative

@richhuntsd12 Год назад

Nice video Mark. Udaman

@johnmiddleditch3656 4 года назад

Welcome back Mark and thanks for all of your firms great videos. Silly question, given a self centering vice couldn't you run a check on both ends? If it's right run plan A if its vice versa run plan B which would probe the hole in it's alter position and then run a mirror image code. This would make it fool proof and have the advantage of proving the part is actually there as well as saving time.

@Trent-tr2nx 4 года назад

That's a cool idea.

@MrRock861261 4 года назад

i would like to see a video of using fusion to probe multiple points of a part set into cad and update the control based on them.

@madhuj5938 3 года назад

۔۔ ۔

@TotalyWarChill 4 года назад

So when is Mark doing a Vsauce Crossover? 🤔

@petergamache5368 4 года назад

Great history lesson ... but any alkaline power source with 1.5 volts (like AA, AAA, C, D, etc.) is a *cell*. If you place multiple cells in series, then you have a *battery*. Perhaps after realizing that "voltaic pile" sounded like something he did in an outhouse, Alessandro Volta borrowed the terminology for his 1799 invention from the cells in a monastery, in which monks lived. More trivia: Rectangular 9Vs are true batteries - if you crack one open, you'd find 6 tiny cells inside, each producing 1.5 volts.

@Depth_of_Cut Год назад

I need to use the probe before running some weldments. Not to check part location but to set Z for A0. G54 and A 180. G55. This is the first vid I came across and it's already helpful. I need to do a bit more research but I'm already thinking I can use P9810 before I move it into position just to be safe. Then after it's in position I plan to just run the Single Axis Work Offsets probe feature that I just copied and pasted into the program.

@Depth_of_Cut Год назад

It's done already 1st time I ever programed a probe in the program. was really easy I just kept Z at G90 G53 Z0 then programed it to move directly over the part. Then went in did a single surface Z axis work offset probe for my 2 cords G54 G55 then copied the program and pasted it into mine. now when I hit cycle start it moves XY above the part then turns on probe and moves down on Z till it makes contact. There is only 2 ways to get the part in the fixture so I probed it along an edge so if its in 180 degrees off it misses the surfaces and throws an alarm... POKA YOKE...POKA YA-OK!! ...Programed on a VF 6/50 software release 100.21.000.1142. machine was manufactured around March 2022

@dalebennett8169 4 года назад

wish we had nice mill like that at work

@matthewwood6973 4 года назад

Another great video, thanks Mark. Question for you, I think there's a bug in the controller on my machine. Who do I tell? When I use #3006 to stop and display a message it only displays for about 2 seconds then goes away and is replaced by a SnglBlk Stop message. I checked yesterday and this doesn't happen on our VF4 with the classic control there it stays until you hit start or reset like it's supposed to. Machine is an EC-1600 with NGC.

@julianhernandez1436 3 года назад

That's why you have the G1 after the 9810, so the flag doesn't change. Thought it was weird, then seen that if statement after

@snowgoer540 4 года назад

Well I know what I’m doing for the next 11 minutes.

@chriskuiper733 3 года назад

What if the probe alarm shows path obstructed when nothing is in the way??

@chaddanylak8706 3 года назад

how did your prob turn on without setting your G43 tool height

@mariusz1LOADmt 3 года назад

is there any command / g-code to fire the probe into "vigilant" mode so as not to break it when writing a program? something like "P9832" I mean the drive to the detail with a probe so as not to break it program : up.programosy.pl/foto/118956238_963421927490021_3229580305322173151_n.jpg

@NORTHBROOK1978 4 года назад

We say "Operator friendly".

@jimburnsjr. 4 года назад

fantastic video...thank you... very ignorant indeed to habituate community to lieng to self about the value of self validation as the product of falsifying the value of calling a man an idiot; or potentially making him homeless as the product of said judgement and false self validation..... We all have potential to be, and or, commit said crime and thereby be an genuine idiot. .. a very good topic

@MrCoffeypaul 4 года назад

Did I just see an 'If Then' statement on a control unit? Do Haaz control units allow for Parametric Programming?

@Marlfox570 4 года назад

Yes they do

@MrCoffeypaul 4 года назад

@@Marlfox570 You know what I want for Christmas !

@matejkuka797 Год назад

Actually HAAS is fanuc based ! There is so many similarities

@reboottwo7897 4 года назад

In Germany, we say "Idioten Stift" Translated it means idiots bolt or idiots Dowel pin :D Grüße aus Deutschland !

@danielmachado6750 4 года назад

🇧🇷Daniel Machado - Brazil🌎🇺🇸

@madhuj5938 3 года назад

😨😃

@alexandermarothy5004 3 года назад

I call it nincomproofing.

@fordhoarder 4 года назад

This still allows the operator to not set the part against the stop or to set the part on top of chips. Not to mention it's a giant waste of time to call a probe and run this cycle in a high production environment. I'm a big fan of idiot proofing a setup.

@fordhoarder 4 года назад

@TacticalKeychains AMEN.