Mitsubishi Pajero mini Turbo gets a custom exhaust 

If you don't have a welder to build an exhaust yourself, any local exhaust shop can build an exhaust system fairly inexpensive. You just need to use 2" tubing with a "turbo" style muffler, or just a resonator if you want it to be loud.

I ran it for a year like this and sold it. The guy that bought it is running around with the same side exit exhaust.

@josephcarlson1774 I got those 2 bolts out on the back half, going to get rid of muffler and resonator weld in straight pieces so it should be close to what yours sounded like just out the back instead. Thanks for the quick response man 👍👍

Mine takes a little longer to start when it's cold in the morning, not really sure why. I had another one that was the same way, so I just figured that is the way they are.

@@josephcarlson1774 I gave for repair let's see tomorrow because when self, it give a very loud noise of missing crank teeth thing so let see tomo.

@@josephcarlson1774 also I found out it could be few things why car taking alot time to start. 1. oil filter is too big for this car or clogged 2. Coil are weak or spark plugs 3. Fuel pump isn't pump correctly 4. Fuel injector weak or clogged 5.battery weak or generator isn't working 6.Problem from transmission as inside transmission there is gear ⚙️ which loose it's teeth causing slow start or annoying missing while starting

nope, if you have worn out stock exhaust and you change to new one, that will def give you some pick

235/75R15 tires on a 15x7 wheel with a -6 offset

@@josephcarlson1774 was there any need for doing anything else to the vehicle or just putting those wheels with the tires sufficient?

Did you have to use spacers?

I have been daily driving this one for the last two weeks and I love it! 60mph is 4,200RPM's but with a 8k redline it's not bad for as short as my commute is...

I daily a 96 H56A so no turbo and i have the 3spd auto. With plans to do the manual swap and built exhaust similar to yours.