MK6.5 Jetta 1.4T EA211 Intercooler System Upgrade Front Mount Heat Exchanger

Подписаться 258

Просмотров 9 тыс.

50% 1

Currently seeing 5° above ambient at cruising speeds and 22° above ambient under heavy load. Will probably be changing the setup in the near future to isolate the intercooler setup on its own loop with an additional water pump. but Currently it's running significantly better than stock where I was seeing 75° above ambient IAT's!
Heat Exchanger Used in video:
www.ebay.com/i...
ATCMOTO Air to Water Intercooler Aluminum Liquid Heat Exchanger universal 28''x7''x3'' size a.co/d/3FKM2sg

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 95

@MK6CHRIS 3 года назад

good stuff my friend. I have been thinking about doing this for a while.

@CtrlAltMoto 2 года назад

Will this work for our car? I know we have the same. I've been wondering about an intercooler set up too. Rtmg has a watercooler block off plate and apparently sells a "stage 3 intercooler kit" but not sure it fits North American EA211 czta 1.4T engines, I messaged them (rtmg) waiting for a reply, I'd love to hear your thoughts, cheers

@MK6CHRIS 2 года назад

@@CtrlAltMoto what is shown in this video is someone doing it to our cars, so it’ll work. Just not sure if it’s worth it yet. Also the stage3 kit is a lot of work and money for not a lot of gain. I thought about that too

@JZsMK6.5 2 года назад

The block off plate works, from what I can see from their IC kit it won't work on the czta. Someone did just make a direct bolt on FMIC kit with piping looks really nice but the alleged price on it is pretty crazy supposedly it is going to be listed for $1700

@CtrlAltMoto 2 года назад

@@JZsMK6.5 euf, that's steep, tnx fellas for your time and responses

@JZsMK6.5 2 года назад

@@CtrlAltMoto you should be able to make something like this work fairly easily. www.ebay.com/itm/274617695501

@slimshayneegaming 2 года назад

Thanks for the help! Just installed a universal Koyorad Heat Exchanger. For anyone reading this comment. I recommend a 3/4 inch coupler for feeding the one of the pipes to the pipe going to the pump.

@casal.c.2882 Год назад

So what you did was, install a radiator for the coolant lines that go to the water-cooler?

@JZsMK6.5 Год назад

Yes, running the intercooler independently on a FMHE, & running the turbo off the stock H.E.

@casal.c.2882 Год назад

@@JZsMK6.5 23.5x6.75x2.75 these are the measures of the HE?

@XanderFreeman88 3 года назад

Do you notice any better fuel mileage with it separated?

@JZsMK6.5 3 года назад

Think I'm getting an extra 2mpg certainly didn't do it for fuel economy lol

@XanderFreeman88 3 года назад

@@JZsMK6.5 I know I know I got a stock jetta and was looking around the engine bay and was like where’s the IC? We did the same thing in a 240hp John Deere tractor years ago mounting a different cooler for the water to air IC Went from 10 gallons per hour to 5GPH and could pull the chisel plow in a higher gear at higher speed, at half the fuel burn So economically it paid for itself in a day of work and sweat! More money in the wallet and carbon in the air too 🤣🤣🤣🤣

@MegaCbrrider 2 года назад

Does the intercooler use the same coolant reservoir that the engine uses?

@JZsMK6.5 2 года назад

Yes, the systems are tied together. If you need a diagram you can email me @ JZSMK6.5@GMAIL.COM I can send you a few diagrams of the system.

@MegaCbrrider 2 года назад

@@JZsMK6.5 that's crazy. You'd figure they'd want the IAT to be low

@JZsMK6.5 2 года назад

@@MegaCbrrider it's a terrible setup IAT'S can reach as high as 85° above ambient.

@KYLEFRANKILD 3 года назад

I have a jetta 1.4 stage 2 if you can install this for me I will pay you cash please write back

@JZsMK6.5 3 года назад

I mean you could live anywhere how could I just install this for you?

@KYLEFRANKILD 3 года назад

@@JZsMK6.5 newyork and You contact me on text or Instagram dm and tell me what parts to exactly order and I’ll pay you to do exactly what you did to your car cuz your the only 1.4 I have seen with an intercooler mod

@JZsMK6.5 3 года назад

@@KYLEFRANKILD I'm no where near NY, I will be separating the systems soon and posting another video. Tbh it's not all that complicated.

@RaynisticalAllstaR 3 года назад

hey bud, great build! ill be trying this on the EA111 instead. How's the clearance between the plastic belly pan and the bottom of the radiator? I have the luxury of customizing my radiator so I would appreciate it if you could share what would be the maximum possible dimensions of the radiator in your experience :)

@JZsMK6.5 3 года назад

I'd say max dimensions would be 26x3x7

@RaynisticalAllstaR 3 года назад

@@JZsMK6.5 thank you! 💯 ill keep you posted on my build :)

@JZsMK6.5 3 года назад

I highly recommend separating the systems.

@RaynisticalAllstaR 3 года назад

@@JZsMK6.5 i would be! i will also be running a external water to air cooler, which will replace the charge pipe.

@RaynisticalAllstaR 3 года назад

@@JZsMK6.5 did you have trouble installing the belly pan back onto the car with the new radiator or was the belly pan deleted?

@tolgadaa5977 2 года назад

dude why dont you go with a real intercooler. i am thinking about put an air to air intercooler before the stock one(water to air). but i m not sure it makes any difference?. your project is kind of bigger engine radiator right?

@JZsMK6.5 2 года назад

Yea, you can run air to air and remove the stock ic and add a block off plate.

@JZsMK6.5 2 года назад

Wouldn't run a FMIC without removing the stock IC it's just going to bring Temps up.

@arvinmactal5374 Год назад

does it require a tune ?

@JZsMK6.5 Год назад

Does what require a tune? Sorry it's not showing me what video this comment is on.

@ozone377 3 года назад

So how's it going man? And how's it looking for tomorrow? You think you'll have those lines separated?

@JZsMK6.5 3 года назад

Forgot I have a wedding to go to tomorrow ill have it done soon though everything is set to be installed

@ozone377 3 года назад

@@JZsMK6.5 ok

@ozone377 3 года назад

@@JZsMK6.5 how's it going? Hate to bug but just wanted to know if finally u were able to seperate the cooling system?

@JZsMK6.5 3 года назад

@@ozone377 sorry bro hate to keep delaying, currently in the middle of restoring a piano. It's taking up all my time currently. I went to do it last week but ended up having a issue with something else on the car, and spent my time on that instead.

@ozone377 3 года назад

@@JZsMK6.5 ok. Well I'll bug u again in a couple weeks. If I don't just end up putting a front mount air to air

@dalbergmassanga4650 3 года назад

Did you notice any difference? Also I see in your second video, you got an other setup with wires, does it require more than the first video you installed?

@JZsMK6.5 3 года назад

It makes a difference, but eventually 30 to 40 mins after consistent running Temps will reach their peak, rises about 8° every 10 mins. Next step is separating the turbo coolant line and running it off the stock H.E. while running the IC off the F.M.H.E. and yes the 2nd video I added an additional coolant pump. Which is what I will be running the FMHE on when I separate the systems.

@dalbergmassanga4650 3 года назад

@@JZsMK6.5 very interesting man , but is the additional pump necessary or I can just install the heat échanger to do.....thanks you seem like you know exactly what you talking about is there a tutorial ?

@JZsMK6.5 3 года назад

If you want to run only an additional H.E. I would suggest something more like this for the setup. rcagarage.com/shop/cooling/radiators/koyo-dual-pass-universal-heat-exchanger-radiator-turbocharged-supercharged-applications-kh183627/?gclid=CjwKCAjw-qeFBhAsEiwA2G7Nl2-UAxiiVeRx5DuSINkcVmDaoPvF9wsAcMtu2lfVYAcbxYeZxR0-PxoCsngQAvD_BwE

@JZsMK6.5 3 года назад

I ran the additional pump to see how much it would increase the efficiency of the FMHE running in conjunction with the stock setup. Adding the additional H.E. add almost a extra 1/2 gallon of coolant to the system, while the stock pump seemed to manage fine, I already knew I was going to separate the system so I just ran it inline for efficiency testing.

@JZsMK6.5 3 года назад

If you don't want to run 2 pumps upgrading the stock auxiliary pump would be sufficient enough. The Bosch pump I installed pumps about 2X the amount of coolant per hr and could be used to replace/upgrade the stock pump.

@ozone377 3 года назад

Did it make a difference?

@JZsMK6.5 3 года назад

@ozone377 3 года назад

@@JZsMK6.5 OK thank u.

@ozone377 3 года назад

@@JZsMK6.5 it looks awesome

@JZsMK6.5 3 года назад

@@ozone377 Thank you, I do enjoy how it looks, think I need a Euro plate next

@ozone377 3 года назад

@@JZsMK6.5 u mean a euro license plate?