Riden RK6006BT DC Power Supply powered by Parkside X20V battery. I used 3d models from this site cults3d.com/en... but I changed it a bit because I use inserts for screws and not nuts.
Nice. I made one with WZ3605E module, and I modified the back of the enclosure . This module has a cooling fan a bit larger. I cut the original grid and made a new one. It is a very handy little thing.
Be carefull, the X20 Parkside battery pack has no undervoltage protection! You can deep-discharge with a load like this. Once the pack goes under 15 Volts, it may loose a cell......
@@patomahony9747 Sure they have a BMS with all kind of protection but undervoltage. The tool (eg power drill) itself shuts down if the pack goes under a certain voltage. I already killed a battery because I used it for something else than it was itended for, and I deepdischarged it. I had to reverse engineer the battery pack...
@@zaltdrob I have used parkside 20v batteries to see how long they would run led strobe lights before shutting down. Usually they shut down at 10v. The led lights are capable of running down to iirc 8v Not had any issues with the battery packs failing to charge or loosing longevity
@@patomahony9747 10 Volt for the pack means 2V for each cell. That's sketchy :(. The point is that theese batteries are designed for paskside tools, not for DIY. Unfortunatelly.
Bravo ideja vrh, ja budala naručio 10 krugova potenciometre da gradim slično jer imam masu ispravljača koji odgovaraju čak i jedan 600WA koji ima veoma malu struju mirovanja i zagrevanja u praznom hodu pa da smo izvučem napajanje sa elektrolita. Treba proveriti WZ3605E da li elektronika u nekom slučaju kada dođe do nekog minimalnog napona daje u nekom momentu povišen napon, ume da se dešava kod inpulsnih napajanja da podivlja i da u jednom momentu povisi napon i da se spali što se napaja. Ako neko istestira na smanjenje napona WZ3605E neka ostavi komentar i pomene me, ja sam iz elektronike iskočio komenrcialno 21 godinu ali planiram da se vratim iz hobija, da pokrenem kanal sa elektronikom, ako ima R. A. da čitaju ovaj komentar ja sam YU5RIM.
Radi od 0-60V, uglavnom za maksimalni napon od 60V moraš imati preko 60V na ulazu, izračunaš po formuli (input voltage÷1.1)-1 znači za 60V max ti treba 67V na ulazu.