Mobile Water Well Drilling Rig I My First Bad Borehole 

I've worked on a few hundred oilrigs over the years and I have to say your ingenuity is impressive with this design.

I got to help drill 3 water wells in Zambia... We used an LS-100 portable rig from Lone Star Drilling Company out of Texas... this rig reminded me of the LS-100...

Fantastic build. Thank you for sharing.

Cool machine. Nicely done.

I've been watching a bunch of these DIY well drilling videos. This is the second one I've seen from Europe and I can already see a big difference between the EU approach and the US approach. There are lots of people in the US who dig shallow wells, but many of them seem to use a lot of water to drill the well. All of their contraptions require a flowing tap and hundreds/thousands of gallons of water to dig a 25-foot deep well. Whereas, the two EU guys who have done it devised these small reservoirs that capture and reuse most of the drilling water. This approach definitely seems to make more sense. Great video!

It's very nice and simple portable well drilling machine. Bravo.

Muy buena idea y muy bien implementada. Mis felicitaciones y muchas gracias por compartir. Saludos desde Chile

Красава Димон, ща пойду такую мутить. Спасибо большое за идею.

very impressed. very compact.

You are a gennie a$$ and I mean that in the best possible way, you are my hero, man, great job!

THats very cool. Overkill if your just drilling one. It’s nice that 240 is your standard.

Просто молодец! Буровая ,это инструмент а опыт придет уверен!

Well done sir! Nice fabrication

Nice simple design. If you can drill rocks. You can drill anywhere

I would love to buy one of these the design is incredible.

C'est inspirant et magnifique 🥰

Nice Rig by the way. I come from a semi arid area in Kenya and i would like to build me one of these in the near future so that i drill wells in my community as a way of giving back to them.

It is a very useful device, especially in times of water shortage. I wish I had something like this.

Inspirational video actually

Great build! On the water return. If you keep the intake floating on top , to get less dirt etc . I am sure with your improvements and learning experience. You will have that satisfaction of a clean drinking water well. It is never easy. Good luck 👍

nice setup

Keep trying it takes a long time to learn well drilling I did it for 4o years I was still learning only thing is electric an water don't mix dangerous

Thank you for sharing!

You tried your best. I know you will do it perfectly next time 👍

Well done 👍 No pun intended.

Great just a question where did you get the motor/gearbox assembly and the connection part water inlet pipe? I mean i want build one my self thanks

Mesin Bor Sumur sangat praktis ini samgat cocok digunakan tidak berisik. 👍👍

Fajny film 👍👍👍

I would definitely back-ream every joint before I made a connection. It’s just good practice that is worth the extra minute.

Perfurador Bom bem reduzido fácil para transportar e instalar.

Nice job sir

Zo'r ixtiro xalqqa foydasi tegadigan

Where did you get the gear motor and what are it's specs and partnumber? Same question on drilling pipe?

Amazing ingenuity and build quality. Can you tell us what brand of electric motor and gearbox you used for this machine? Thank you.

Good job

Excelente trabajo felicitaciones!! Quisiera saber de cuantos HP es el motor que hace girar la mecha, Un abrazo desde Uruguay

Que habiloso eres amigo.. 👍

I ran rigs 40 years ago after a couple of wells you get the hang of it. It’s not that complicated. Especially after you drill wells with a thousand pounds on them.

Very cool

Is very good,,,bro....

Nice work, could this setup be used to drill solid bedrock? Rotary hammer?

Muito lindo!

Good jop with good skills

What pipe thread NPT or ?. I made mine with an two -person post hole digger. It came with an engine and transmission that help with torque. I had to buy a water pivot but worked down to 100 ft no problems. Most problems occurred with the pipe

Greetings. What are the details on the motor and gear reduction, winch rating etc. Thanks!

Very nice looking drill. I know your first hole did not work, so what about another one ?

nice job my friend!i would like to ask you:are you sure that rpm is 60?i count 120rpm,secondly what is the size of the pipes??thank you!

Great job 👏👍👌🙌 what is the maximum depth & what diameter

Excelente maquina diámetro de tubería es el adecuado para esa máquina

I’d like to build one, can you share the tech drawing please? Also for swivel it should be bought correct?

Thank you for sharing your project... If you don't mind, the hp of the motor and the gearbox and output speed rotation of gearbox.

Bravo

Where do you get your drill stem fittings and drill stem?

How many meters does he dig? And how many inches of water does it take out?

that model of drill is very good it is well done how can I have all the manufacturing data

wow veery very nice

I too spend some years on drilling rigs, and love how you managed to get to the core of the drilling process. I think you could use it easily also to make vertical geothermal wells for home use with a heat pump. Can you tell what max depth you reached?

Very impressive. Is that 3 phase motor? If it is what generator you will recommend to run in USA ? Thanks .

I think you may have been nearly there. Water settles in the gravel layers, so if you were getting only gravel you were somwhere near the right place. Bear in mind you might have to go through gravel layesrs to reach the right one. Its a good idea to talk to others in the locality and find out if they have a borehole and how deep they had to go.

Nice sir

Класс . Хорошее решение

It's an excellent machine, I want to buy one like it, where can I buy a machine like this

My greeting well done

How did you build the drill stem water port

what depth can be drilled, how much does it cost and how to order from Indonesia

Design can be little modified to drill fast and in hard or rock strata, just use the rope of winch in loop so driving forward n reverse you can further force the drilling, but in rock you would have to change your drilling bit

Do you have a drill kit or materials list with links to make or buy the drill used? What was the final cost?

The design is really cool.. did you make the water swivel as well ??

What kind of pipe is used for drill stem can regular steel water pipe be used

I made a machine similar to that but I have a problem because where I live is mud (muddy from which the water comes out with a bad smell) I have had landslides and the water is lost I don't know what they recommend to me to be able to make my well I already bought a small window but I haven't tried it yet

Nice

Nice job indeed. You can get an estimate of the water table anywhere in the world using google map, it requires a bit of ingenuity though

What we got down there?..Yella nugget??!..😂

What are the specifications of the motor and gearbox?

How do you make that water swivel?

Can you share the specifications in detail? I am very interested in making a water drilling machine that is very simple and easy to use Thank you and Greetings from Maluku Indonesia

I am impressed looking at your production, I would like to make one like yours, where can I find the motor and the kits?

Amazing! I would like to build this. Do you have a parts list for this build? Thanks!

From Dominican Republic

good job! can you tell me what kind of drill you use when you get to a layer of gravel? thank you

Kada dodjes do tvrdog tla, stene, umesto vodenog pritiska koristi vazdusni od copco kompresora, jeste skupo ali takvo je resenje.

Nice video, what's the brand of drilling rig?

Where did you get the water swivel?

Круто !

Where did you source the motor and transmission?

Dear brother, can you inform me abou link order Motor 2.2KW includ gear box ???

GOOD

What is the power of the engine you used

Cześć . Jaki jest rodzaj gwintu na żerdzi wiertniczej?

Great Build, but how much can drill the machine? If you can guides me with the max capacity of drilling can be great. Thx for the guides

Good Job love the skills .. what's the power of the drilling motorgear ? and the pulley one? thanks a lot for sharing such good job sir !!

Hola buenas noches, felicitaciones tan bonito invento deseó que me compartas la información de motor

muy bueno

Any chance showing us the water swivel build please.

awesome! what motor is that and what part is that at 20 secs in

what is the price and how much depth can you afford?

How much depth can be achieved using a dynamo engine?

What is the horsepower of the engine you used?

how do you know that you found water and stop drilling?

Hello Cypsmen, nice rig you have built, I guess I could ask the same question every body is asking? You have your prototype, are you making portable rigs? Looks like a investment if enough people are willing to pay the price. After all most people would rather pay the price for a rig that is ready to go as to building one, All I know is I do not see one like yours for sale. thx