No video :(

'Model C' Industrial SBC: Deep Dive inc Oven & Freezer Stress Test (+Giveaway)

Подписаться 7 тыс.

Просмотров 1,1 тыс.

50% 1

This little thing actually performed way better than I ever imagined, and I have to give Debix / Polyhex credit for creating a very solid product that meets every spec/requirement/expectation!
There are some minor changes I think would improve it, but that's just my personal opinion.
FYI DEBIX is actually an acronym for the range of SBCs created by Polyhex, and originally stemmed from: D-Development；E-Embedded；B-Board；I-Industrial；X-Kits
PCBWay Store: www.pcbway.com...
DS213 DSO: www.pcbway.com...
❤ DON'T FORGET TO LIKE AND SUBSCRIBE! ❤
💳 Patreon: / platima
📈 Benchmark Results
- Geekbench V5: browser.geekbe...
- Geekbench V6: browser.geekbe...
🔗 Resources
- Reddit Discussion: / debix_model_c_i_put_th...
- Product Page: debix.io/hardw...
- Purchase: polyhex.en.ali...
- Software: debix.io/Softw...
- Technically Unsure: • Debix Model C: Rugged ...
- Other Resellers:
- Okdo www.okdo.com/?...
- au.rs-online.c...
- Documentation PDF: debix.io/Uploa...
- Documentation HTML: debix.io/Docum...
- GitHub Repos: github.com/deb... (dormant)
- Micro NPU: www.nxp.com/co...
- TSN Info: iebmedia.com/t...
- Secure Enclave: github.com/nxp...
- Image 1 Source: towardsdatasci...
- Image 2 Source: www.researchga...
🛒 Shop: shop.plati.ma
💵 PayPal: paypal.me/Plat...
📺 Other Channel: / @platima
📷 Instagram: / platimatinkers
🌏 Reddit: / platimazero
#Platima #Debix

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@glompos21 Месяц назад

Great video !!! For Giveaway: an edge computer with 4 camera to have a 360 detection for fruit farms: 1) to calculate hourly the fruits size, 2) people detection for alarm, 3) i2c weather station

@PlatimaTinkers Месяц назад

Oooh nice one! Have you got a fruit farm? 😅

@glompos21 Месяц назад

@@PlatimaTinkers yeap - past olives and lemons, now avocados

@PlatimaTinkers Месяц назад

@@glompos21 Awesome! We're all grapes with a few olives where I am

@PlatimaTinkers Месяц назад

@@glompos21 Hey mate you've got yourself a free DEBIX Model C - shoot me an email (address in 'About') with name, address, contact # and I'll post it out and send you tracking! Cheers

@glompos21 24 дня назад

@@PlatimaTinkers Thanks a lot !!!! Will post here what i will build

@tomlynn1000 Месяц назад

Really comprehensive video, thanks! (I'm a subscriber - HA) I'm in telecom, so I'd use it as a backup pbx system, for when we get separated from our data centers, in a large retail branch store environment. 1 nic for admin subnet and the other nic would handle real time communications using SIP and RTP. Kamailio and Freeswitch would handle SIP registrar and media services. Neural processor can perform real time transcription of sensitive conversations using whisper or the like. The audio jack would serve as a paging interface connected to the store music system to allow overhead paging. This is the first little board that has all of the elements I've been seeking for this build. A/C often failes in these environments resulting in equipment damage. so another plus here.

@PlatimaTinkers Месяц назад

Thanks mate and glad to hear! Backup PBX is a great idea, and I expect it's got more than enough performance in it. Using the TSN NIC for SIP and RTP would work well if the rest of the infrastructure supports it. If your vPBX software supports real-time transcription that's awesome. Most of my deployments these days are 3CX, and I don't believe that has any hardware offloading. Good luck!

@tomlynn1000 Месяц назад

@@PlatimaTinkers I work in enterprise VoIP with Avaya gear. Great solution, but it's rather expensive to maintain their edge recoverability posture across hundreds of sites. I'm looking for something a little smaller, even if it ends up providing little more than a large intercom system during a dual WAN outage. Starlink may help, too. 🙂 In this ecosystem, voice transcription is a separate application ceded to dev partners.

@PlatimaTinkers Месяц назад

@@tomlynn1000 Aah okay yeah makes sense. If this would work, that could go well! Don't get me started on Starlink 😅

@kingyachan Месяц назад

Never heard of these guys before! Pretty interesting. I haven't got anything I could use it for, but keen to see everyones ideas!

@PlatimaTinkers Месяц назад

I had not either, but yeah definitely some great stuff. Same haha.

@legendarytr1bal Месяц назад

Really like this model, it seems to have it all. Lets hope it goes to a good home. Good job on the review, Platima!

@PlatimaTinkers Месяц назад

Thank you kindly! Their rep is great too - I passed all my feedback on, and it's been acknowledged and forwarded to the R&D team.

@AndrewBorrill1 Месяц назад

Temp/gas monitoring in a very remote harsh environment, like at the lip of a volcano. Combine this with solar cells and battery to keep the sbc running continuously. Human visit would probably be every 3 months to access data from the sbc. The low power consumption would fit well with this case use.

@PlatimaTinkers Месяц назад

Interesting!

@Jeff-ss6qt Месяц назад

It could be useful for hooking up several thermal cameras for intelligent board heating for soldering within an enclosure. So that there's less chance to kill a BGA chip and overheat a board. Maybe also a way to prevent and detect fires and trigger an emergency system to put it out. Maybe even an automatic way to find shorts. Maybe it could also be used within a 3D printer enclosure to check if bed temperature are even as well and that your part isn't getting too hot to the point it will warp as well. On the opposite end of the spectrum, it could used for monitoring pipes and making sure that they don't get cold enough to burst.

@PlatimaTinkers Месяц назад

Oooh I like that first idea. USB 2.0 can definitely handle the low data rate of a thermal camera. What would YOU do with it though? :P

@Jeff-ss6qt Месяц назад

@@PlatimaTinkers The 3D printer thing could be really useful.

@PlatimaTinkers Месяц назад

@@Jeff-ss6qt Absolutely, make it happen!

@ivolol Месяц назад

Dual gbit lan... might make for a nice LAN router.... Separate wifi connector is probably even advantageous for industry, if you are putting them in a box then you want the device in the box and the antenna outside

@PlatimaTinkers Месяц назад

Yeah absolutely!

@CyberOne Месяц назад

I'd use it to run Node-red to capture data from 2 or 3 PLC's on one network and save the data to a MSSQL server on the other network and make that data available over MQTT for a bin level and content display board. I've been trialling this type of setup using a Raspi-3, but not happy with using the Wifi connection for the SQL server side of the connection. Something like this would free up the Raspi-3 to run MyRobotLab on and that can then drive up to 64 20x4 character displays for the bin level using the MQTT protocol over the business network. The business and PLC's network are separate and no routes exist between them for security reasons. I like the idea that this is designed to run for long periods non-stop.

@PlatimaTinkers Месяц назад

That sounds like an excellent use case!

@snarfusmaximus Месяц назад

I'd probably use it as an NFS and MOP boot server for a diskless MicroVAX-II I have. I'd assume it would be hell of a lot less power hungry than the Chromebox that I was planning on using.

@PlatimaTinkers Месяц назад

Very fair! Can I ask though, how would this make use of it's embedded nature? Eg the temperature handling, TSN, etc? It won't affect whether or not you get it from my side, but people might not up-vote your suggestion if they don't see the relation! Cheers 😊

@snarfusmaximus Месяц назад

@@PlatimaTinkers Probably not much as I could just as well use a Raspberry Pi, unless I decide to put it in the cabinet where it could get a bit toasty.

@PlatimaTinkers Месяц назад

@@snarfusmaximus Yeah fair! I've killed a few Pico's out at the workshop if they're too close to the east wall as it just radiates heat in summer mornings!

@chrootchad Месяц назад

I would use this to mine crypto in the desert.

@PlatimaTinkers Месяц назад

Hahahahah. Gold. In 400 years you may get 1 BTC 🤣

@chrootchad Месяц назад

Gotta be quicker than how I’m doing it now: watch?v=y3dqhixzGVo

@PlatimaTinkers Месяц назад

@@chrootchad Hahahahahha

@Undertheroot Месяц назад

That's good model. And If i get a chance then I will do less development and more work on pwning and finding vulnerability with it as it support windows and linux and based on arm. kinda cool to carry and portable. Bcz most of the arm based windows is laptop so kinda hard to carry on.

@PlatimaTinkers Месяц назад

Ain't wrong. I cannot believe that the 19AH battery I had it on still showed > 80% full after 6hrs40mins hah.

@Undertheroot Месяц назад

@@PlatimaTinkers that's so cool. It's indeed a good sbc. And I got my milkv yesterday and thank you for that.

@PlatimaTinkers Месяц назад

@@Undertheroot Awesome to hear, not a problem at all!