Model Railroad Track Cleaning Tips

Подписаться 65 тыс.

Просмотров 92 тыс.

50% 1

In this video I share some great model railroad track cleaning tips. I explain various processes and methods for track cleaning and I demonstrate the CMX Clean Machine track cleaning car. #model railroad #trackcleaning #CMX
✅Check out one of my favorite non-railroad channels--Legion of Weirdos: / christophermast
✅RTNT Amazon Page: www.amazon.com...
✅Amazon Pick of the Week: amzn.to/2DNRQUd
amzn.to/2DXeBZ7
(NOTE: The above are Amazon affiliate links: I make a small commission from any purchased made through these links.)
✅Take advantage of the rewards for your support of Ron's Trains N Things through Patreon:
/ ronstrainnthings
Thanks to my Patreon friends.
*Heroes: David H.--sparky107107
/ sparky107107
*Partners: Todd Walton--Wally's Weathering / 2toady
Chuck Hedler--Chazco
/ @chazco
Roy Hardwick--CONTAINERMAN68
/ @containerman68
*Patrons: Wendell Camp
Thanks to my PayPal.me supporters: Bruce Giroux, Johannes Maeding
✅You too can support this channel through PayPal:
www.paypal.me/...
Your support is greatly appreciated. Thank You.
🔸Contact me via email: ronstrainsnthings@gmail.com
🔸Follow me on Twitter: @RonsTrainsNTngs
/ ronstrainsntngs
🔸Connect on Facebook:
/ ron.marsh.5059
/ ronstrainsnthings
🔸Connect on Instagram: / rtrains
🔸For more about my layout, the Texas Colorado & Western Railway, check out / tcwry
If you like what you see give it a "like" 👍, subscribe 🔔, comment 💬 below, and share it on your social media and model railroad forums.
Credits:
Theme Song: "Extremes" by the Lemming Shepherds
Exzel Music Publishing (freemusicpublicdomain.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons...
"What a Beautiful Sunset - extended" by Angelwing
Exzel Music Publishing (freemusicpublicdomain.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons...
Sound E ffects: LoudTVStatice.wav from Freesound.org by 18hiltc / @rc_swift1772
Licensed under Creative Commons Attribution 3.0
creativecommons...
TVStaticSound by KLEBER KGF from Freesound.org
Public Domain
Equipment:
*Canon Rebel T3 DSLR--amzn.to/2Cmm8xt
*MX-2000 tripod
*Logitech C922x Pro Stream Webcam--amzn.to/2CaBzfd
*Excelvan 2kW Lighting Kit--amzn.to/2EcHZrH
*Blue Snowball Ice Microphone--amzn.to/2Cb1raG
*2 Clamp Lamps
*The Sun--en.wikipedia.o...
*HitFilm 4 Express--hitfilm.com/ex...
*Audacity--www.audacitytea...

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 161

@riogrande5761 2 года назад

I learned from reading MRH magazine that odorless mineral spirts make the best track cleaning fluid. Less micro arcing occurs than with using alcohol. It's the micro arcing that creates the black stuff you clean off the rails.

@RonsTrainsNThings 2 года назад

You need to see my more recent video, "Stop Cleaning Your Track..."

@riogrande5761 Год назад

MRH also recommends a light application of graphite applied to the top inner surface of the rail.

@n-scaleunionpacificevansto6569 6 лет назад

Thanks, Ron, you've reminded me that it's time to clean the track. I have a CMX track cleaning car and have been using it for some time. I like the way it works. I don't use the syringe, however, because it doesn't fit in the hole very well. Instead, I use an eye dropper. It really is heavy, and on helixes or other inclines, a single diesel really struggles to push it. On occasion, it gets hung up in turnouts. I use isopropyl alcohol and run the track cleaning car over all the track at least twice. ...Roy

@RonsTrainsNThings 6 лет назад

My one locomotive never stalled but slowed down significantly on 2% grades with it. I meant to mention but forgot that I never hung up on any turnouts bud did on 2 Atlas re-railers. Thanks for watching, Roy.

@ricardojuricic9027 4 года назад

Hi, how about runing the set downwards instead of upwards. In theory if car's upfront & running downwards I think it might help .... sorry just thinking about it Cheers

@LoganEKline 4 года назад

Anyone else binge watching Ron for seven hours?

@EtobicokeCentralRailways 6 лет назад

I've used the CMX cleaning car as well, it's a great product. Thanks for sharing.

@richardmattingly7000 6 лет назад

Great video, I especially liked the way you cleaned the locomotive wheels but be careful as plastic wheels/acetone don't like each other. Oxidation can't be prevented and before/after solvent cleanings a non chemical removal of dust is a good idea because it loves moisture.

@swapmeetlus4096 5 лет назад

I love how we are all on a budget and are saved by our lovely wives/girlfriends.

@Madhuntr 4 года назад

i have neither soooooo. where do i count in

@josephthien9302 6 лет назад

The CMX car looks great. I may need to invest in one. When I clean my n scale track with a bright boy, I periodically wipe the bright boy on a folded paper towel, that removes most of the junk so the bright boy doesn't spread it around the layout.

@RonsTrainsNThings 6 лет назад

+Joseph Thien You are thinking along the right lines, but a paper towell wont remove enoug contaminants to keep from spreading them.

@marcbarnum9038 4 года назад

I have that clean machine car, best cleaning car out there. I built a boxcar with the Masonite slider too, I use Woodland Scenics Hobe-tac to the Masonite and put a Shotgun cleaning patch on that and trimmed the edges. The Hobe-tac allows me to swap the patch out when it gets dirty. I put the boxcar behind the CMX car to wipe the rails. Metal wheels on all your rolling stock helps the track not get dirty so quickly too.

@russrockino-rr0864 6 лет назад

Hi Ron, I have been wanting the CMX for my O-scale layout for a long time, but they are about $300 for the O-scale version. They are very nice machines. I am saving up right now. Another great video, keep up the good work!

@RonsTrainsNThings 6 лет назад

Yes, I waited some time due to cost also, but when you get it you'll know it was worth the wait.

@sohchx 6 лет назад

I truly believe that I can make my own version of one of these out of an old car. $160 is insane for something so simplistic.

@RonsTrainsNThings 6 лет назад

If you do, let me know. Make a video about it, or contact me and I will. You are right, that would ve a great project.

@andrewlewis9194 4 года назад

Great idea, a model railroad tank car that actually carries a useful cargo!

@TomKlimczak 6 лет назад

Uncle Ron wants YOU...to clean your track. lol This subject gets argued about more than the sound decoder debates. However, the best substance I have found for cleaning your track is CRC 2-26, available at Home Depot. You spray a thin layer on a scrap piece of Homasote and wipe it on your track. It takes off the filth and lays down a thin conductive wash as you go. No need for expensive track cleaners nor abrasive cleaners that you rightly point out are havens for gunk to grow. Plus, by using scrap Homasote you slowly get rid of that box full of Homasote leftovers.

@RonsTrainsNThings 6 лет назад

+RockIsland652 Interesting. I've never heard of it. I'll have to check that out.

@troysimpson9550 6 лет назад

I use CRC 2-26 as well and have had great success with it. it is designed as an electrical Plastic safe lubricant, penetrant and corrosion inhibitor that helps prevent electrical malfunctions caused by water penetration, humidity, condensation or corrosion. It does leave a thin protective layer to stop oxidation, and somewhere i read it helps repel dust and moisture. i use CRC QD Plastic Safe Liquid Contact Cleaner for heavy cleaning.

@alanhudson2986 6 лет назад

Cheers Ron. Nice explanation and demo. I've seen a few people over here in the UK use the CMX car. It's pricey as you said but seems to work well.

@JoeG-firehousewhiskey 6 лет назад

Awesome video, thanks for the tips and tricks at the end. I will definitely be getting one of those CMX cleaners.

@dashaB-sl4pu 3 года назад

HERE in Australia we use this wagon with INOX an Australian product and it is brilliant, highly recommended if you can get access to it, leaves everything else for dead

@mozzarella-king 6 лет назад

Good video and thanks for the tips. In my very limited use of the CMX on my n-scale layout, I recommend anyone using acetone to be very careful about the flow rate and the speed you run the car. Acetone melts Atlas ties extremely quickly. Micro Engineering ties will melt also, though much more slowly. I've lately been running Aero-Car ACT-6006 with good results and am tempted to try Isopropyl Alcohol.

@RonsTrainsNThings 6 лет назад

Good advice. I would recommend filling it NOT on the rails. With a drip rate on 1/5seconds I got no acetone on anything but railheads, but great care should be taken. And again, I personally would only use such an aggressive solvent rarely when track is really dirty and would do maintenance cleaning with alcohol.

@MrCarrizojim Год назад

I’ve always thought Brite Boy was too coarse. I liked to use a Pink Pearl eraser. Cleaned my slot car brushes and armatures with a pencil eraser.

@dacuzzz 6 лет назад

hi Ron... i have a track cleaner similar to the bright boy but it's not an abrasive more like a hard rubber... i also have a life like or Bachmann cleaner box car but the most important one is the CMX track cleaner... i love how it works & would recommend it... good video.. thanks for sharing.. vinny

@RonsTrainsNThings 6 лет назад

+bnsf6951 Hi Vinny. Yes, I am loving the CMX car. Pricey but a worthy investment.

@N-Scale 6 лет назад

Thanks so much Ron, Great video but I would caution about using Acetone on Kato or Bachmann track as the Acetone can melt the roadbed. Thanks , Mike

@RonsTrainsNThings 6 лет назад

+Mike Fifer Good advice, Mike. If set correctly the CMX car cleaned the rails without gettin 1 drop on the ties or roadbed, but care must be taken for sure.

@N-Scale 6 лет назад

That is true and the car is great. Thanks for the great video. Mike

@Mercatoyd 6 лет назад

This was a great video and the comments are super.. You and I have already discussed the file scratches ..and you told me about the stainless washer..I think the wood block and washer are very much in order for me to build.. great tip. Tom

@RonsTrainsNThings 6 лет назад

+Overland Transportation System It really does help significantly.

@hovermotion 6 лет назад

Ive been using the cmx for years now...but I swaped the wheels for euro fleischmann wheels...I sometimes use Goo gone but it takes a hour to dry from the rails...I am going to try panel wipe which is used in the auto trade to clean a metal painted panel prior to painting.

@rileybishop4517 6 лет назад

I enjoyed your Track Cleaning Tips video,and wanted to comment on your pumping unit in the background.It is not un common to find the bridle and polish rod hung up in the high position of the stroke indicating a downhole problem

@RonsTrainsNThings 6 лет назад

Thanks for that info. This model is an operating model that just wasn't turned on for this video and is in the position where it last stopped when it was last turned off.

@ricardojuricic9027 4 года назад

Hi Ron, yes I was looking forward to a video on the matter especially from someone with a large layout as you. You've had a helix and other tough places to reach by hand, so I wondered how you got that clean. Well if there's a snow plower for outdoor railroads, there's got to be something alike for indoor railroads. From the bonus, so how do you clean the inside parts of the rails? I do appreciate your comments, I'm looking forward to reading/hearing on that matter. Thanks again for your videos! Cheers Richard

@RonsTrainsNThings 4 года назад

Hi Richard. Honestly, I haven't really cleaned the inside of them before, but I am considering a vacuum car specifically for cleaning dust from the helix.

@ricardojuricic9027 4 года назад

@@RonsTrainsNThings hi Ron well you could have a MOW train with the tank & vacum cars + 6 axel loco. Cheers

@ken9503 6 лет назад

I purchased the CMX car about a year ago for my HO layout. It does a great job. I use CRC 2-26 as the cleaner. It not only cleans but enhances electrical pick up and it's plastic safe. Now I'm going to say something that may be create some controversy. Acetone. it may be a great cleaner but it will destroy some plastics. I have a number of insol frog peco turnouts and would be hesitant to use it on them and would also be concerned about plastic wheel sets. This is just my opinion.

@RonsTrainsNThings 6 лет назад

I would not use acetone all the time--just for very dirty rail like I had, and you are right, you have to be VERY careful. I would use something much less aggressive for 99% of my cleaning.

@EagleValleyModelRailroad 6 лет назад

Great cleaning tips Ron, Thanks for sharing.-Ed

@RonsTrainsNThings 6 лет назад

Thanks.

@Drkush2022 6 лет назад

Good ideas! I bought the hornby skid pads, a bit different methods used, but still cleans up nice!

@RonsTrainsNThings 6 лет назад

+Dr Kush Thats cool. Thanks for watching.

@IMRROcom 6 лет назад

On my CMX car I have drawn a line on the control valve. This way I no longer have to do the 5 second count. Just use the line as an indicator of how far the valve is open.

@ZanesTrains1972 6 лет назад

Great tip

@RonsTrainsNThings 6 лет назад

Good tip. Thanks.

@jimgeary1771 4 года назад

My first time watching your video. Learned a little more today.We have a toy museum and were given 2 train layouts. One is complete and has been in storage 4 years and not used for years before that. The other is a recent gift with miles of track and needs to be landscaped. I'm currently getting ready to move it to storage. Both will need cleaning when we can set them up. Do you have any tips on cleaning a completed set up, landscape, buildings, etc that has not been run in many years? Both are HO. Thank you.

@shawnleih2916 2 года назад

Good tips 👍

@sparky107107 6 лет назад

the clean machine has to be the best piece of rolling stock i have. works great. I just need to find a place to get more pads for mine. no dealers up here carry them. nice video sir. thanks for the info. I think this is the first time I have seen you run a train,, and a bit of a layout tour. I suppose that is a good way to give a tour anyway. lol. nice tips at the end, I didn't know that about a metal washer.

@RonsTrainsNThings 6 лет назад

Cleaning pads...ask and you shall receive: amzn.to/2Fve4e8 Layout tour with some running trains: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hb57IH_pg0I.html Thanks for watching. 👍

@johnbarone843 6 лет назад

Fabric stores carry corduroy, you can pick up a little remnant for a few bucks, and have a lifetime supply of cleaning pads.... Just make sure it's reinforced with the mesh on the back...

@sparky107107 6 лет назад

can you put up a video on what you mean. with the mesh and all ?

@johnbarone843 6 лет назад

sparky107107 The "mesh" is the backing that is on the corduroy...

@RonsTrainsNThings 6 лет назад

That is true. Just make sure it is thin and soft like the original, but that shouldn't be that hard to find.

@IMRROcom 6 лет назад

Made me look, My CMX car also has metal wheel sets. Was thinking it might be too old and have plastic MTL wheels

@crompton33022 4 года назад

Thank you. I have always wanted one but your video has made my mind up. I'll be ordering one later today. Best regards Ian Brunssum NLD.

@RonsTrainsNThings 4 года назад

Be sure to let us know how you like it.

@HDSME 6 лет назад

Sounds good yes that would work thanks Tony

@TheGamingEevee8 6 лет назад

Thanks again for the video was wondering what is the best way to clean my Lima track.

@SirVisigoth Год назад

Great Video, loved the bit about cleaning with old hankerchief on diesels, have you got a good way of cleaning Steam Engine and tender wheels?

@freakazoid5907 4 года назад

Ron - do you have any thoughts on the CMX car after 18 months of use? Does it do all the cleaning you need, or do you need to do other track cleaning chores? Was it worth the $$$?

@RonsTrainsNThings 4 года назад

A great question. I use it every few months when things seem to be clogging up a bit. I use it most in my helix. After each major cleaning I treat my track with no-ox which keeps it from oxidizing and promotes conductivity, so I don't have to clean track as often. As far as worth the money? Depends on how much track you clean and how often. I think it has been worth it, but no doubt they are pricey. I wouldn't buy one for a small layout.

@randysrockandrollrailroad8207 6 лет назад

Great video Ron, thanks for sharing

@RonsTrainsNThings 6 лет назад

Thanks.

@csxbaltimoresubdivision7746 6 лет назад

Great video Ron I'll have to try the cmx car out.thanks for sharing

@RonsTrainsNThings 6 лет назад

+CSX 8840 CSX Baltimore sub division If you do let me know what you think.

@austinyingst5902 5 лет назад

My first trip was isopropyl alcohol (only thing I had) after one trip around, my 4wheel stubby diesel switcher made the circuit without a nudge. Tip: avoid rubbing alcohol; it has stuff good for the skin but may not be good for the rail--wheel interface. Thanks.

@MMRails 6 лет назад

Great video. Say, what’s in that mug that you take a sip out of every video? And why haven’t you finished it yet? -Mark

@RonsTrainsNThings 6 лет назад

That's the best kept secret on RU-vid. That might make it into my next Q&A video. LOL

@LegionOfWeirdos 6 лет назад

I always used to use the dark end of an eraser for cleaning track. I haven't set up an N Scale track in at least two decades though and my O scale stuff is still relatively new and more tolerant of dirt. My N Scale stuff is too old for the sound startup stuff... As for my O scale stuff, I must admit I completely don't understand how to work it. I know if I let the engines idle long enough, I'll eventually start hearing different sounds and voices, and the more throttle you give, the more it matches with the sound effects, but as for any "sequence"... no idea. The only steamers I have don't have sound effects. We might possibly be moving this year, and if so, I'll be looking for a basement corner for a train setup 😀 Against my most paranoid instincts, I kept the Tide pods vs tossing them in a dumpster. They smell REALLY nice when you wash with them.

@RonsTrainsNThings 6 лет назад

Basement train layout...AWESOME! As for Tide Pods, did you see my Facebook share and post about Hurtz Donuts Tide Pod donuts?

@jacko9759 6 лет назад

Good show Ron, looks like I'm going to invest is one of these cars, thanks for sharing....

@RonsTrainsNThings 6 лет назад

I eyed one for years due to the price, but now that I have it I think it will be worth every penny. My mainline hasn't run so well since just after I laid it. Thanks for watching.

@jacko9759 6 лет назад

Ron, I just had a thought how about putting the washer on the disk on the Tomix track cleaning & vacuum car you get BOTH the polishing action & vacuuming of the track, but that of course before or after cleaning it with this of course? Just a thought, what do you think!

@RonsTrainsNThings 6 лет назад

I didn't say in the video, if using an aggressive solvent, fill the CMX car OFF the layout and move it onto the tracks when set up. This will help avoid damage from spillage. I filled mine on the rails here ONLY for the sake of getting it on video.

@rg1809 6 лет назад

scary to think this tip is necessary to point out, but then I've read some comments on your other videos.

@RonsTrainsNThings 6 лет назад

I would rather try to be safe than have someone blaming me for melting their ties.

@germanmosca 6 лет назад

Or even worse: Dissolve plastic, and attack the paint on the cars and engine. Which Aceton can do.

@101Crock 4 года назад

Bonus tip, You can also apply a layer of electrical lubricant or car wash/wax to seal the rails from dirt.

@RonsTrainsNThings 4 года назад

I use no-ox on my track between cleanings, but it still needs a good cleaning every 6 months or so.

@marcelpinkster 14 дней назад

Old vid. But dont use acceton. Eats up the plastic and makes it brittle. Can not imaging tha csx advices acceton.

@gkoproske 6 лет назад

After the cleaning run, you should have done the finger test and showed us that the rails are completely clean. Also, you should have made mention of the Life Like bottle of blue stuff. Is it any good? That's what hobby shops sell. There is also automatic transmission fluid, Flitz or Maas metal polish, and graphite pencils.

@RonsTrainsNThings 6 лет назад

There are lot's of methods out there, and I know I just hit the basics. I've never used Life Like's stuff, but solvents work well and are cheaper. as for transmissions fluid, I've seen a few who swear by it but the idea of spreading an oil on my rails seems to me to be inviting dirt. I've also see the graphite and again have no experience but to me it seems logical that clean rails would be preferable to rails with stuff on them. Again, those are just my thoughts having never tried these methods. Plus I was specifically discussing cleaning rails. What you mention are supposed to be electrical conductivity aids, but not cleaning methods (excepting the Life Like product).

@alexweis9706 6 лет назад

great video ron i am getting one this spring time out of my taxs money

@RonsTrainsNThings 6 лет назад

+Alex Weis Let me know how you like it.

@sharkzf6 6 лет назад

pretty cool machine! your RR rocks dude!

@RonsTrainsNThings 6 лет назад

Thank you for your comment and thanks for watching. 👍👍

@gerlandkent6377 5 месяцев назад

[thank, you for youre video]👍

@jamie6126 5 лет назад

At 2:30 your ex BN BNSF locomotive (green locomotive) is derailed lol

@TestECull 6 лет назад

Mmm, even more of a reason for me to grab a CMX car of my own. And it looked easier to pull than people say it is, like I could pull it with my 2-10-2 or my Atlas Shay, which I've applied Bullfrog Snot to.

@RonsTrainsNThings 6 лет назад

+TestECull it didn't pull too bad. With mine 6 axle diesel locomotive it slow down some onto percent grades and it does get hung up on Atlas rear Ayers but mostly it pulled fine with one locomotive.

@TestECull 6 лет назад

Mmm, yeah people keep saying you *need* at least two C-C diesels to pull these things, that steam power is right out of the question. I always figured they were exaggerating but it's nice to have confirmation. when I get around to buying one for my own layout I'll probably make an MoW train for my 2-10-2 to pull, with this right behind the tender. If all else fails I have a DD40AX with a shapeways full carbody and another 2.5oz of lead shoved into it, I've got a plastic frame LL E8A, I've got a Con Cor 4-8-4 S2 that's able to pull wheelies, so I've for sure and certain got power that can pull the thing. But it's nice that I can use the sort of power one might expect on an MoW train to pull it. I've also heard that you can use the CMX to clean locomotive and rolling stock wheels if you're using a long lasting solvent(Say, Goo Gone, which would be my first choice). You'd pull it along normally, but run trains just behind it. The solvent left on the rails cleans the wheels of the equipment trailing it, then the next pass 'round the CMX picks that dirt up too.

@jeffallen5698 6 лет назад

I am certainly going to get one..excellent video..you mentioned a"keep alive" device..what is that? Is it hard to install and is it worth it..i am running DC ..if that matters

@RonsTrainsNThings 6 лет назад

A keep-alive circuit is a capacitor included in sound decoders for DCC.

@hohobbyist1098 4 года назад

Some DCC/sound decoders have a capacitor inside. It keeps them running for a few seconds after power is cut.

@phyllisokeefe6540 6 лет назад

Ron---great job A question. When cleaning sterling silver, there is a deoxidizing paste sold commercially that is applied to the utensil and rubbed off and shined. Because of its deoxidizing and-cleaning properties, can it be used as a track cleaner or does it leave a residue on the track that will interfere with the movement of current from the rail to the wheel. It sounds like the delightful way to make quick work of a miserable task. Thanks far listening. Jack okeefe

@RonsTrainsNThings 6 лет назад

I have never heard of anyone using that for track cleaning, so I really don't know.

@macrolog 5 лет назад

I love the music

@billfusionenterprise 6 лет назад

Might want to get a pipette for adding solution to take, get more precise control of fill, or maybe a straw

@jeffreykopp 3 года назад

Ron, my engines run very well on my track. However, I have a passenger train with KATO light packs in the cars. They work, but flicker too much for my liking. I am not running DCC at this time, just straight DC. So not sure if there is any cure for keeping the cars from flickering as they travel along the track. I also have power running to the track every 36". Wondering if you have any experience with this or would have any advise. Love your channel - I learn a lot from your productions and appreciate all you do. - Jeff

@barryl8857 5 лет назад

With that layout size, you almost need to dedicate a loco to track cleaning and just let it run all around all the track.

@RedWolf777SG 4 года назад

Too right man.

@elizabethrice9611 4 года назад

how clever! I think the parking parts on the side are done manually?

@IMRROcom 6 лет назад

Well the sturder problem on BNSF 9222 is . . . It is not properly set on the rails.

@RonsTrainsNThings 6 лет назад

I had to go back and look. It wasn't in the first shot, but it was when I ran it. It is actually on a different track when I ran it. First shot it was on the nearest track--the passing siding. When it ran it was on the main, 2nd track.

@SpookyMcGhee 3 года назад

When you said aggressive solvent I immediately thought goof off for a second

@dylanwhite6539 2 года назад

I’m gonna try using a piece of sponge and isopropyl alcohol

@user-nx8tk1pp5o 6 лет назад

An electrician, who is also a professional model railroad repairer, told me that rubbing alcohol, even the high concentration 91%, will leave a film of water on the track, he suggested using Goo Gone.

@RonsTrainsNThings 6 лет назад

I've heard other suggest that, but have never tried it. I'm going to check it out.

@archieberger3975 6 лет назад

What kind of camera equipment do you use? The quality is great. Thanks.

@RonsTrainsNThings 6 лет назад

It is all listed in the end of the description of each video.

@joeeiden7366 6 лет назад

Hey, Ron another great video. I was wondering, have you looked into the Woodland Scenics Tidy Track products? The track cleaner they offer is pretty good IMO. It has various pads of different materials that can be swapped out. They come in aggressive to very light. Although still a solid pad as the ones you mentioned in the beginning of your video, it’s my understanding they are less aggressive then most available. The cleaning head can be mounted on a included rod to reach track that is out of arms length. One member in a local club near me even mounted the rod to a piece of PVC pipe for an even longer reach (his rail road is huge). Woodland Scenics also offer what they call Dust Monkeys. These are small soft pads that clip to a piece of rolling stock and are dragged around the layout. Great for picking up light dust on the rails. Dust on the rails seem to be a big problem up here in North Eastern PA since most layouts are built in basements. Woodland Scenics also offer what they call the Roto Wheel Cleaner. This is a nifty little device that easily hooks up to your track via alligator clips and once power is applied, will clean the wheels of your locomotive. It also works well on rolling stock. The Roto Wheel also has replaceable strips in 2 different materials. All of these products are available in N, HO and I believe O scale. I’ve used all of these and (in N scale) and do like them very much and have recommended them. But, like all Woodland Scenics products they can get a bit pricy. All that said, I think I’m going to look into that track cleaning car you showed. Looks like a good reliable cleaning system. Thanks again.

@RonsTrainsNThings 6 лет назад

Hi, Joe. I am aware of the Woodland Scenics products, but I have never tried any of them. Thanks for your description of them. Some folks may read this and want to give them try. 👍

@HDSME 6 лет назад

Ron nice vedio but acetone is deadly on plastic to be sure! I use elbo grease and a brush instead just saying

@RonsTrainsNThings 6 лет назад

You have to keep the acetone off the plastic. This applicator doesn't pour it onto the track but just drags a damp cloth across the rails. And again, I don't use acetone all the time. As I said in the video, I used acetone for this cleaning of very dirty track, but for maintenance I use alcohol. The problem with the brush is that you can simply move the contaminates around on the track without actually removing them.

@georgehimich330 6 лет назад

Cleaning track with alcohol. Our model train Club did an extensive study using various solvents and methods of cleaning the track. We are open to the public for a 16 day period during the year. We run for 10 hours per day, and get a lot of action on our layout. Our responsibility is to maintain a running operation, and as a result effective cleaning is Inportant. We have found that using Isopropyl alcohol is an absolute waste of time. Run your own tests. A small amount of WD40 on a rag is a thousand times better.

@carlosavena6376 4 года назад

what solvent would you recommend to clean the track if you are running some locos with traction wheels?

@RonsTrainsNThings 4 года назад

The main thing there would be to avoid a solvent that would damage the rubber. Some people dislike isopropyl alcohol, but it is safe.

@billvassar7473 6 лет назад

wish i had bought this car instead of the aztec car it works o.k. you have to change the rollers from scrubber to wet solvent they are seperate rollers.

@RonsTrainsNThings 6 лет назад

Interesting. I did not know that.

@thegreypenguin5097 6 лет назад

Do u use dcc?? Which dcc system do u use.

@RonsTrainsNThings 6 лет назад

I do use DCC. I bought the MRC Prodigy Advance system when it first came out, upgraded to wireless, then later had the software upgraded to Advance2, which is where I am now.

@heli-man- 6 лет назад

Does this work on dcc systems or does the fluid on the cleaning pad cause a short circuit

@RonsTrainsNThings 6 лет назад

Mine is a DCC layout. Yes, it is excellent for DCC layouts.

@ChazTurmon 4 года назад

Thanks for the tips. I’ve been running N scale but constantly get frustrated because the front wheels off my steam engine love to derail at the tail joiners mid corner. I haven’t been able to figure out how to fix it. Has made finishing my n scale layout no fun since the train hardly makes it all the way around. Any tips for these issues?

@RonsTrainsNThings 4 года назад

Well, let me ask 2 questions. 1) What size, model, and make are your steam locos? 2) What is the radius of your curves and are the curves smooth?

@ChazTurmon 4 года назад

@@RonsTrainsNThings The model is N scale size, PRR K4 4-6-2 Steam Loco. The radius where it jumps the front wheels off is 9 3/4". It's more like the front wheels ride up and over the outside of the rail if that makes sense. It happens at the area where the snap track joins. It is about the second curve piece after the first curve and then does it again later in the turn as well. I do believe it is level. I have tried filling the inside of the rail. It has helped a bit but the issues is still there. I had actually relaid all of this track and took my time in hopes of eliminating this issues. As for my train cars, I have no issues with them. They are also longer passenger cars that aren't recommended for these tight radiuses but again, I have no issues with them.

@engineeringmadness2397 3 года назад

hiay what gauge are you modeling in

@guyhighfield3777 4 года назад

Great tips thanks Ron , what was the music you used ?

@RonsTrainsNThings 4 года назад

I don't remember off hand, but the info should be in the description.

@louisjones597 4 месяца назад

What's the name of that music

@ffieditor 4 года назад

Get rid of the 90%, pitch it the trash/bin. Use contact cleaner.

@MrLeejan 4 года назад

Goo gone on a clue shop towel.

@thelowmein9143 6 лет назад

What is a traction tire?

@RonsTrainsNThings 6 лет назад

+The Lowmein Some steam locomotives (which have all drive wheels connected via connecting rods) will have a thin rubber (or similar material) ring that stretches around one driver on each side to improve traction--traction tires. Acetone will eat these.

@xxlegitdashxx3738 5 лет назад

At 2:24 your Burlington northern locomotive is derailed

@007trekhound 3 года назад

Put pad in garment bag and throw in washer on hot with bleach reuse them

@scottbrandt3814 6 лет назад

your BNSF 9222 is Derailed

@alexnunes1799 3 года назад

Is 70% alcohol okay or do I need to get 99% alcohol ho scale

@ironpug42 Год назад

Doesn't Acetone eat plastic

@louisjones597 4 месяца назад

I just use pre-made liquid track cleaner that can buy

@sparky107107 6 лет назад

oh,,, and extra large.

@RonsTrainsNThings 6 лет назад

LOL, took me a minute to figure that out. Got it. Thanks.

@pfflyer3381 9 месяцев назад

Alcohol on meals? No water please. How about electronic cleaner! Also put a dehumidifier in the room!

@ZanesTrains1972 6 лет назад

Stop lying to us, you know that you just wanted to show off your shiny new track cleaning car. One thing I would bring up is take your time when cleaning locomotive wheels, make sure no alcohol is on your finger when going to touch the body over time and it can take off the road name/number decals.

@RonsTrainsNThings 6 лет назад

Good advice.

@ZanesTrains1972 6 лет назад

Ron's Trains N Things don't ask me how I know.

@scottleidenberger4007 4 года назад

I have to comment on the use of a Bright Boy and alcohol for track cleaning. You should never use either one ! The Bright Boy will leave behind pieces of the pad. The alcohol will clean the rail but that is all you have. It will not allow the electrical circuit to be completed very well. It will work for you but not for very long . Instead use CRC contact cleaner and protectant or WD 40 contact cleaner. Clean the wheels of your loco and track. Your cleaning cloth will be black when finished and your trains will run smooth as silk. I know because I used alcohol for years and will never go back to it.

@danwillis2671 5 лет назад

99% isopropyl alcohol is no stronger than 70% isopropyl alcohol. The only difference is the amount of water added. 70% iso has 30% water, 99% iso has 1% water. Isopropyl alcohol is isopropyl alcohol. Water is bad for your track and your layout. Only 99% iso should be used.

@ricktherecorder4416 3 года назад

People keep saying that “water is bad for your track”, but I have never seen any evidence that it is, certainly not in the microscopic quantities we are talking about here. Modellers spray their track with water-diluted PVA without a second thought. Distilled water evaporates completely and quite quickly at room temperatures. It’s possible it could marginally promote oxidation, but not if you are running trains over it regularly. Same as the real thing really, except that nickel-silver is not steel and rather less corroding.

@MrLeejan 4 года назад

Never show off your model r.r. Never functions as when you are by yourself

@erroldawdy3637 3 года назад

Sorry, but you lost my confidence when you referred to those bolts as nails.

@RonsTrainsNThings 3 года назад

FYI the home made cars I had seen used nails for this. The photo with the bolts was found after the video was recorded.

@dmaxsba 5 лет назад

This is stupid, 6:40 Masonite is NOT abrasive. I dare you to show how it is possible to scratch a metal rail with a piece of wood! Put a Masonite pad under several regular train cars. Run one in EVERY SINGLE TRAIN on your layout and clean your tracks as you go around the track. No need to spend $100 for this junk, run special track cleaning trains because the cleaning car weighs TOO MUCH (CMX) or use any chemicals at all! Will Masonite clean your tracks instantly NO, but will it do the job over time ABSOLUTELY! If you spend your money on this WAY over priced junk you either have TOO MUCH money to toss away or you are simply TOO LAZY to make your own cleaning car fleet.

@RonsTrainsNThings 5 лет назад

Abrasive: "(of a substance or material) capable of polishing or cleaning a hard surface by rubbing or grinding." (Webster). It absolutely is abrasive by definition. I NEVER SAID masonite would scratch the rails. MORE IMPORTANTLY if you disagree I am happy to have a discussion, but if you result to rudeness and name calling, we're done...We are done.